Nanit Pro User manual

Floor Stand User Guide
Guide de l’utilisateur du support de plancher
Manual de usuario para el soporte de piso

3
• What’s In The Box .............................................................. 4
• Safety ......................................................................... 5
• Let’s Get Started ............................................................... 6
• Installation Options ............................................................7
• Assembly ..................................................................... 8
• Compliance .................................................................. 18
Table of Contents
Watch an install video before trying it yourself: nanit.com/install
Limited Warranty: nanit.com/legal/warranty
Français à partir de la page 19
Español a partir de la página 35

4
What’s In The Box
Nanit Pro Camera 4 Floor Stand Tubes, "Y" Joint
and 4 Cord Management Channels
3 Floor Stand Legs
U-Bracket and 2 Drywall Screws
Free Standing Attachment Joint
Power Adapter

5
Safety
• WARNING: Strangulation Hazard—Children have
STRANGLED in cords. NEVER attempt to use cord without the
protective covering. Check protective covering before each use
to ensure that the cord is not exposed to your child. Immediately
discontinue use if protective covering is damaged or broken.
• This device is designed to be used behind or next to a standard
crib, in the middle of the long side of the crib.
• Adult assembly is required. Keep small parts away from children
when assembling.
• This product cannot replace adult supervision. Ensure your child’s
health by checking on him/her regularly.
• This device is designed for indoor use only.
• This product and its packaging are not toys. Do not allow children
to play with them.
• Use only the AC power supply included with your Nanit.
• Never plug Nanit in to an outlet which is within reach of your child.

6
Let’s Get Started
Download the Nanit app and set up your account.
Follow the in-app instructions to set up your Nanit Camera.
You can choose to follow the assembly instructions in-app or in this booklet.
nanit.com/app

7
Installation Options
A
You can install your floor stand against the wall, behind the crib (A). If your crib is not against
the wall, you can install the third leg to place the Nanit in a more suitable position (B).
B

8
Assembly – Wall Leaning or Free Standing
Assemble stand, top to bottom. Follow the steps starting on the next page.
1.
START END

9
Push together the first segment (A). Then screw remaining tubes together, followed
by the“Y” joint (B). Screw both legs to “Y” joint (C). If using the free stand, follow the
steps on the next page.
A B C
Assembly – Wall Leaning or Free Standing 2.

10
ED
If adding the third leg, screw the leg to the attachment joint (D). Then slide and snap
attachment joint into the back of the stand (E).
3.
Assembly – Free Standing Only