Nanoleaf Elements User manual

~marter by Des,gn
Nanoleaf Elements
W d L k H I
SmarterKit
00 00 9X0Q0nS KitdeDemarrage
Quick Start Guide
Guide de demarrage rapide
Guia de inicio rapido

Light
Panels
~ Linkers
□
Mounting
Plates
\ ___ ! Controller
~ GETITON
~ Google Play
Mounting
Tape
+l for Controller(optional)
Power
Supply

User Manual & Warranty Registration
go. nanoleaf. me/ m ye l ements
0

Important Installation Tips
lx
•
42W
Make sure you hove enough PSUs for your layout. NOTE: Each standard PSU
supports up to 42W. Use our PSU calculator online at go . nanoleaf . me/myelements .
To mount, apply strong pressure
in a circular motion to the center of
the panel for 30 seconds.
♦
•
The Controller and Power Supply
Unit con be connected to any panel
in your setup .
& z:::,,a!==-=-=---- ....
◊◊
◊
Before mounting your panels ,
clean your surface to be free of
dust, moisture and oil.
Tope 1s NOT suitable for textured,
porous, popcorn and ceiling surfaces
(ie. wallpaper or brick walls).

r ,
@
L .J
Nanol eaf App
Layout Assistant
,
,
-----·-·-

w
m
+
@ OPTIONAL

0

0
.I
', .. ,' ' ('=>.~ @ =~=- I
~
0

@ WARNINGS & CAUTIONS Please read this safety information carefully and keep this document for future reference. Help articles and
customer support 1s always ovo1loble at helpdesk.nonoleaf.me. This Nonoleaf@ product is not designed, certified, nor intended for usein•
enclosed locations that limit the flow of air and/ or trap heat which contributes to on environment temperature over 40 degrees Celsius;
emergency exits, emergency lighting, or other use coses involving critical systems for human safety: In conjunction with 3rd party devices that
ore not approved by Nonoleof® for use with Nonoleof® products; locations or use coses where there is o risk of electric shock; outdoor areas.
regardless of weather conditions; wet or damp conditions; as a floor covering or floor tiling; excessively hot environments that ore consistently
above 40 degrees Celsius for extended periods of time (for example· near ovens, space heaters, clothing dryers); excessively humid areas;
regions or countries other than that in which the product was intended for and certified for sale in. When using this Nanoleaf® products, do not
open or disassemble the device, as this will void the warranty and make the product unsafe for use. While connected to the electrical supply of
the building, line voltages will be present in the power supply, panels, linkers, so do not place any metallic or conductive objects near any
exposed metal contacts on any component. Unplug the power supply unit from the power source before dismounting light panels. Do not allow
small children to operate this device without adult supervision. This device contains small ports that may be o choking hazard to small children.
Loose or dangling cords may cause an entanglement hazard to small children. Do not leave cords dangling or loose on the floor to help prevent
accidents from tripping. Do not clean the device with liquid or sprays when it is connected to power Clean the panels with a soft dry cloth, and
do not use harsh cleaning agents. Do not step on any port of the device, as this will cause breakage. Do not submerge any part of the device in
water, or expose any part of the device to water. Do not bend or flex the panels with the connector still attached, as this will cause breakage.
Do not attach the panels together with any connector or device other than original equipment manufactured by Nanoleaf(i) Do not puncture
any port of the device with sharp objects, as this will cause the device to cease working as designed and may presento safety hazard. It
adhesive tape 1s a component of this product, please note that it is not designed to be used with brick wall, wallpaper, uneven/textured
surfaces, or highly porous surfaces. Do not use double-sided tape to attach any part of the device to a ceiling or surface greater than 90
degrees relative to the floor, as the device will eventually foll down-creating a safety hazard and risk of damage to the device. Optional secure
screw mounting solutions for these use cases are available, sometimes through added accessories offered for purchase separately. Your
warranty DOES NOT COVER damage caused by falling devices. The flexible cable and power supply cannot be replaced by another third party
product. If the coble is damaged, the entirecontroller and power supply should only be replaced with original equipment manufactured by
Nonoleaf®. Using any non-approved replacement component will void the warranty and may present a serious safety hazard. Nonoleof(i) light
panels are primarily intended tor decorative use, with tunable white output function that con dim.
WI-Fl/RF This equipment hos been tested and found to comply with the limits of a Class B digital device, pursuant to port 15 of the FCCRules
and the Canadian ICES-003Class B specifications. These limits are designed to provide reasonable protection against harmful interference in
o residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in o particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures· Reorient or
relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a

circuit different from that to which the receiver Is connected. Consult the dealer or an experienced radio/TV technician or visit
go.nonoleaf. me/ support.
FREQUENCY RANGE
2.4GHz Wi-Fi· 2412-2462 MHz, Max RF eJr .p power< 20 dBm
2.4GHz Radio 2402-2480 MHz, Mox RF e.i.r.p power<l0 dBm
NFC : 13 56MHz, Max RF e.1 r.p power 0 dBm
CE INFORMATION The external flexible coble or cord of this luminaire cannot be replaced; if the cord is damaged, the luminoireshall be
destroyed. The hghtsource contained in thislumma,re shall only be replaced by the manufacturer or this service agent or o similar qualified
person. NonoGrid Limited (Nonoleof) hereby declares that this device is in compliance with the essential requirements and other relevant
provisions of Directive2014/53/EU. The declorot1on of conformity Is ovo1loble at go.nonoleof .me/ eudoc .
WARRANTY INFORMATION This product is covered by a limited warranty from Nonoleot•·· a two-year complimentaryreplacement of defective
hardware. For full details visit: go.nanoleaf.me/warranty.
Disposal of your old product' Your product is designed and manufactured with high- quality materials and components. which con
be recycled and reused When this cro ssed-out wheelie bin symbol is attached to a product, It means that the product Is covered
by European Directive 2012/19/EU. Please find out about your local collection system for electrical and electronic products. Please
act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of
your old product will help to prevent potential negative consequences for the environment and human health.
@ CONTENU DE LA BOITE Ponneaux Lumineux. Plaques de montage, Bandes adhesives, Connecteurs, Contr0leur, Bloc d'ohmentation
CONSEJLS D'INSTALLATION Assurez-vous que vous disposez de suffisamment de blocs d'alimentotion pour votre disposition. REMARQUE:
Cheque contr6Ieur peut prendreen chorge jusqu'6 42W.Utifisez notre colculateur de bloc d'alimentation dispornble sur
go.nonoleof. me/myelements .Avant le montage, nettoyez votre surface pour qu'ellesoit exempte de poussiere, d'humidite et de substances
huileuses. Pour le montage, apphquez une forte pression dons un mouvementcirculaire au centre du panneau pendant 30 secondes. Le
controleur et le bloc d'ahmentat1on peuvent Atre connectes6 n'importe quel panneau de !'installation. l'odhesiffourni n·est PAS odapte pour les
murs en briques, le papier pemt et autres surfaces ,negates.
AVERTISSEMENTS ET MISES EN GARDE Veuillez lire attentivement ces informations de securite et conserver ce document pour toute reference
ulterieure Les articles d'a1de et le support client sont toujours d1spornbles sur helpdesk.nanoleof, me / hc/fr Les produits Nonoleof'~ ne sont ni
conc;us. ni certifies, nl destines 6 ~tre utilises: dons des endroits fermes qui hmitent le flux d'oir et /ou piegent la chaleurqui contribue 6 une

Nanoleaf Canada
# 400 -100Front Street East
Toronto, ON
MSA1E1 , Conodo
Nanoleaf Europe SAS
11 Rue de Lourmel
75015 Pons
Fronce
Manufacturu
NonoGndl1m1ted
Still Need Help?
go . nanoleaf.me / suppo rt
@ Beso1n d'oide? go . nonoleof .me/support
@ ,Aun neces,to oyudo? go . nonoleof . me / suppart
Models:
NL52· K-7003HB- 7PK
NL52 -K-700SHB- 7PK
FCC ID: 2AEWY - NL42
IC: 20489-NL42
Power Supply Specs:
InputVoltage; 100-240V-S0/60Hz
Mox Power; 16W
#1301-483A Castle Peak Rood.
Kowloon, HongKong Communication
Protoco l:
w,-FI (2/iGHz b/ g/ n) ; 2 4GHz proprietary CE

rJm ID @nanoleaf a II @thenanoleaf
nanoleaf.me

~-
-~-~-
---
--
• ~.~.
-
••••••
••
iOS
r-.~,·•~[!]
• !ii,. L-
. .
◄
.
: ••
-
--
•••
•••
•
S21230E2210
[!]'"''· ... [!]
I'• I ... - • ■
.-1. •,• •;..!J
- •.• ~ . :,al
ritffe.
~1=-~ ~
[!] ~ .. :.:r:., ..
Android