Nanoptix ULTRA SYSTEM User manual

Document no: 102814 -0010R – GR March 2020
Quick Setup Guide - Nanoptix Ultra System Wireless
1. Shut down all
g
amin
g
terminals
2. Remove Game Controller black boxes (C) from packaging and place inside each gaming terminal that you
wish to monitor with the s
y
stem.
3. Connect each Game Controller black boxes (C) to the game terminal using cables (A) & (B) along with the
red wire taps
(
included
)
.
4. Cable
(
A
)
part # 210029-0302R “WHITE-GREEN-BLACK”
•Attach the white wire (PULSE IN) to the gaming terminal’s “credits in” hard meter or directly to the
coin mech, bill acceptor, etc. usin
g
the enclosed red wire taps
•Attach the green wire (PULSE OUT) to the gaming terminal’s “credits out” hard meter using the
enclosed red wire taps
•Attach the black wire (GND) to the ground connection of the gaming terminal’s power supply using
the enclosed red wire taps
5. Cable
(
B
)
part # 210029-0121R “BLUE-RED-BLACK”
•Attach the blue wire (FORCE CASHOUT) to the gaming terminal’s “knock off” button using the
enclosed red wire taps
•Attach the red wire (+12Vdc - SUPPLY VOLTAGE) to the +12 VDC of the gaming terminal’s power
suppl
y
usin
g
the enclosed red wire taps.
•Attach the black wire (GND) to the ground connection of the gaming terminal’s power supply using
the enclosed red wire taps.
6. Install Spill Proof printer
(
E
)
at the bar/counter
(
for further info refer to the Spill Proof Printer Owner’s Manual
)
7. Connect the Host Game controller
(
F
)
to the Spill proof printer
(
E
)
usin
g
cable
(
D
)
8. Connect the Control box
(
G
)
to the Host Game controller’s
(
F
)
left RJ12 receptacle
9. Power ON the Spill Proof printer
(
E
)
with paper loaded
10. Turn ON all gaming terminals, if the installation was completed correctly, within 60 seconds the control box
(G) lights corresponding to the connected games will be illuminated.
11. Additional cables (not shown) are used for advanced programing and firmware updates
Web: WWW.NANOPTIX.COM
Email: [email protected]
Phone: [phone]

Document no: 102814 -0010R – GR March 2020
Ultra Dip Switch Settings
0 = OFF = switch up
1 = ON = switch down
GAMES BOXES (1 to max 24)
Switches # 1, 2, 3 & 4-> Game number
DIP Switch #
(1 - 2 - 3 - 4) Game number
1 - 0 - 0 - 0 01
0 - 1 - 0 - 0 02
1 - 1 - 0 - 0 03
0 - 0 - 1 - 0 04
1 - 0 - 1 - 0 05
0 - 1 - 1 - 0 06
1 - 1 - 1 - 0 07
0 - 0 - 0 - 1 08
1 - 0 - 0 - 1 09
0 - 1 - 0 - 1 10
1 - 1 - 0 - 1 11
0 - 0 - 1 - 1 12
1 - 0 - 1 - 1 13
0 - 1 - 1 - 1 14
1 - 1 -1 - 1 15
0 - 0 -0 - 0 Set by software
(up to 24 games)
Switches # 5 & 6-> Credit Size – IN
DIP Switch #
(5 - 6) Credit Size
0 - 0 1
1 - 0 5
0 - 1 25
1 - 1 100
Switches # 7 & 8-> Credit Size - OUT
DIP Switch #
(7 - 8) Credit Size
0 - 0 1
1 - 0 5
0 - 1 25
1 - 1 100
HOST BOX
Note: Dip switch 8 is reserved for future use.
DIP Switch # 1 Function
0 Cashless System
1 Accounting Only System
DIP Switch # 2 Function
0 Nanoptix Scanner/LCD
1 Handheld Scanner/Pole Display
DIP Switch # 3 Function
0 Cash out ticket is not printed
1 Cash out ticket is printed
DIP Switch # 4 Function
Firmware version 3.3C & below
0 No Controller Box Included
(with Spill proof)
1 Controller Box Included (with
Spill proof)
Firmware version 0.0E & above
0 Up to 6 games
1 Up to 24 games
DIP Switch # 5 Function
0 Print 1 cashout receipt
1 Print a cashout receipt & a
duplicate cashout receipt
DIP Switch # 6 Function
0 Verifies printer status
1 Ignores printer status
DIP Switch # 7 Function
0 Multi-To-One OFF (Less than
15 games)
1 Multi-To-One ON (More than
15 games)

Document no: 102814 -0010R – GR March 2020
KIOSK BOX
Note: Dip switches 3 & 4 reserved for future use.
DIP Switch #
(1 - 2) Kiosk Identification
0 - 0 #00
1 - 0 #01
0 - 1 #02
1 - 1 #03
DIP Switch #
(5) Function
0 BV Enabled, capable of
recharging account
1 Display Information Only
DIP Switch #
(6) Function
0 Printer Enabled, capable of
creating new accounts
1 Printer Disabled
DIP Switch #
(7 - 8) Credit Size
0 - 0 X1
1 - 0 X5
0 - 1 X25
1 - 1 X100
GATEWAY BOX
Note: Dip switches 5, 6, 7 & 8 reserved for future
DIP Switch #
(1 - 2) Gateway Communication type
0 - 0 Direct or LAN
1 - 0 Analog Modem
0 - 1 Cell Modem
1 - 1 Future
DIP Switch #
(3 - 4) Gateway Identification
0 - 0 #00
1 - 0 #01
0 - 1 #02
1 - 1 #03
GAMES WIRING:
Cable # 210029-0302R
Wire Color Function
White Pulse IN
Green Pulse OUT
Black Ground
Cable # 210029-0121R
Wire Color Function
Blue Knock Off
Red +12Vdc
Black Ground
CONTROL BOX FUNCTIONS
Print cashout
Pressing buttons <1> through <6> individually will
remotely trigger the knock off switch of the desired game
number
Last Cashout
Pressing and holding the <Soft Meters> button while at the
same time pressing the number <1> button will print the
“LAST CASHOUT” ticket
Dailies
Pressing the <Soft Meters> button will print the “Dailies”
and the “GAME REPORT”
Clear Dailies
Pressing and holding the <Soft Meters> button then
pressing the number <6> button will clear the “DAILIES”
but not the “GAME REPORT”.
Bookkeeping
Turning the <key> will print the “GAME REPORT” and
the “BOOKKEEPING” and then clear both
Set Password on Soft Meter
Pressing and holding the <Soft Meters> button then
turning the <key> ON then OFF, and finally releasing the
<Soft Meters> button will prompt you for a 4 digit
password.
Clear Password
Pressing and holding the <Soft Meters> button then
turning the <key> ON then OFF, and then release the <Soft
Meters> finally turning <key> ON then OFF a second
time, will clear and remove the password