Naomi Kids Doll Cradle User manual

Assembly Instructions
Product Dimensions:
21” L x 13” D x 12” H
Please take a moment to read through the entire instruction booklet before assembly to
familiarize yourself with this product. Once you feel ready to start, follow the instructions
step by step and this should make this process as easy as we could make it for you.
If you need help or have damaged or missing parts, contact customer service at
www.NaomiHome.com.
Page 1 of 6
NAOMI
Doll Cradle
KIDS
©
2016 Naomi Home Inc. - All Rights Reserved.

Tools Required
Phillips Screwdriver
(Medium)
Page 2 of 6
ADULT ASSEMBLY REQUIRED
CHOKING HAZARD
•This product includes small parts, sharp points and sharp edges in its unassembled
state. Keep unassembled parts away from children under 3 years of age, & animals.
•If used improperly, your doll cradle may be pulled over or fall, creating risk of injury or
damage. Children should not be permitted to climb or pull on the doll cradle.
USE AND MAINTENANCE
•Use on level surfaces only
•Because this product needs assembly, it is prone to working itself loose from time to
time depending on the use. Please take the time to check that all connections are still
tight and working properly for safety.
•Only clean using a damp cloth and mild detergent, do not use bleach or abrasive
cleaners.
PARENTAL SUPERVISION IS REQUIRED
•This Naomi Kids product is intended for child use age 3+.
•Parents or Guardians should supervise use under the intended age specifically
regarding children that may have access to it and might climb on the unit.
ASSEMBLY RECOMMENDATIONS
•Check you have all the components and tools listed on page 2 and 3.
•Do not stand or put weight on this product during assembly, this could cause damage.
•Remove all hardware from the plastic bags and separate them into their groups.
•Assemble the item as close to its final position (in the same room) as possible.
•Assemble on a soft level surface to avoid damaging the unit or your floor.
•Make sure you have enough space to layout the parts before starting.
•Parts of the assembly may be easier with 2 people.
•Dispose of all packaging carefully and responsibly.
•Do not use this item if any components are missing or damaged.
•We do not recommend the use of power drill/drivers for inserting screws, as this could
damage the unit. Only use hand screwdrivers.
WARNING CAUTION

Head & Footboards
x 2
1
COMPONENT PARTS
Please check that you have all the parts listed below
Cradle Rails
x 2
Cradle Support
x 1
Bedding
x 1
Page 3 of 6
Bolt
x 8
ASSEMBLY HARDWARE
12 3 4
A

ASSEMBLY INSTRUCTIONS
2
1
Select Headboard -
Part 1 and Cradle
Rails - Part 2. Place
cradle rails with the
groove rail inward
and down. Insert A
bolt to holes in
headboard and
with screwdriver
ax rail to head-
board, and repeat
for 2nd rail.
Select Cradle
Support - Part 3
and with
painted side up
insert 3 into
groove of
Cradle Rails
and slide into
place.
Page 4 of 6
3
A
A
1
A
A
2
2

ASSEMBLY INSTRUCTIONS
4
3
Select Foot-
board - Part 1.
Insert A bolt
into holes in
Footboard and
ax to Cradle
Rails.
Select Bedding
– Part 4 and
place in cradle.
Page 5 of 6
4
A
A
1
A
A

ASSEMBLY COMPLETE
Page 6 of 6
www.NaomiHome.com
MADE IN CHINA
Product Packaging Information
Model #:
Color:
Shipment Ref. #:
Date:
________________________________
__________________________________
_________________________
__________________________________
CONGRATULATIONS, YOUR NAOMI KIDS
DOLL CRADLE IS COMPLETE!
NAOMI
KIDS