NASA electric NS-509 User manual
NS-509
NS-509
3 in 1
Coee
maker
4
NS-509
3 in 1 Coee maker
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Off
.
.
.
.
.
5
A
B
C
D
E
F
G
H
J
I
K
L
M
N
P
R
TO
QS
NS-509
3 in 1 Coee maker
.
.
.
Insert
lock
.
a
l k j i h g f
b c d
e
a
b
c
d
e
f
g
h
i
j
k
l
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
.
12:00
ON.
ON
.
.
.
PROG .
CLOCK
.
MINUTEHOUR«
8:10
PROG.
TIMER
.
12:00
ON.
.
ON
ON .
PUMP«
PUMP
«
.
.
.
NS-509
3 in 1 Coee maker
.
13:00
ON .
TIME
PROG«
ON
13:00
ON«
.
.
Insert
lock
OFF«
.
12:00
ON.
«
PUMP«
.
PUMP«
.
.
Insert
lock
.
.
PUMP«
.
ON
ON
.
.
.
OFF
ON.
ON«
«
.
OFF
PUMP
.
.
.
OFF
.
.
ON.
.
NS-509
3 in 1 Coee maker
.
.
12:00
OFF
ON.
LED
«
PUMP
LED «
«
LED.
LED
OFF
PUMP«
.
.
OFF
ON.
.
.
.
.
.
.
.
.
ON.
ON
LED
PUMP
.
PUMP
LED .
LED
OFF
ON
.
LED .
PUMP«
.
.
.
.
ON.
ON« LED
.
ON
.
.
.
NS-509
3 in 1 Coee maker
-
NS-509
3 in 1 Coee maker
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
12
33
34
35
25
36
37
38
39
40
41
42
43
44
45
46
47
48 49 50 42 43 53 25 54 56 57
51
138
139140141142143
59
55
58
48
89
25
60
61
62
63
64
65
66
67
68
69
25
70
71
72
73
74
48
NS-509-24
134135136
8369
137
115
116
76
117
131
129
130
128
27
132
133
71
48
75
76 77 78 79 80 81 44 82
100
101
102
103
104
52
83
84
85
44
86
87
88
90
91
92
93
94
43
42
95
96
97
98
99
105 105 105
105
114
113
25
69 112
111
110
109108
NS-509
3 in 1 Coee maker
12
Guarantee and after sales service
This appliance has 18 month guaran-
tee and 5 years after sales service. For
more information please read the guar-
antee sheet in the end of this user man-
ual or call +982145114.
11
Troubleshooting
Do not take apart the appliance by yourself if the cause of failure is not found, you con-
Troubleshoot Symptoms
Coffee gives an acidic taste.
use«.
Coffee powder is stored in a hot and humid place for a
long time and loses its quality.
Please change the coffee powder or store the unused
powder in a cool, dry place. After opening the package,
close it tightly again and store it in the refrigerator to
keep it fresh.
The espresso maker is no lon-
ger working.
The power cord is not connected properly. Plug the
power cord into the socket properly, and if the device
still does not work, please contact an NASA Electric
after sales service center for repair.
The steam does not come out
The yellow indicator does not light up.
Steam can be used for brewing only after the yellow is
switched on.
The pump of the device is on
but the espresso does not come
out?
First you need to make sure that the water tank device
has water.
The type of coffee may block the passage of water.
It may be pumped.
Contact with NASA electric after sales service.
The espresso comes out too
fast or too slow!
Make sure there is enough coffee in the filter.
If the espresso comes out slowly, the coffee will taste
very bitter.
Slow espresso flow can be caused by a pump problem.
The pump may not receive enough water or be dam-
aged.
What causes the bitterness of
espresso?
Excessive extraction of ground coffee.s
Make sure you do the recommended cleaning of the
device correctly.
NS-509
3 in 1 Coee maker
10
until no water is left in the tank.
10. Repeat the step of 9 at least 3 times to
make sure the piping is cleanly.
Cleaning mineral deposits (for the section
1. Fill the tank with water and scale to the
highest step you can use the citric acid in-
2. Push teapot and keeping warm plate.
3.-
automatically after a while.
4. After percolate the equivalent of one cup
appliance.
5. Leave the solution work for 15 minutes, re-
peat the steps of 3-5 again.
6. Turn the appliance on and run off the wa-
ter.
7. Rinse by operating the appliance with wa-
ter at least 3 times.
Product storage
Please repack the device after finishing work
and place it in a dry place away from wet.
that the parts and the body of the device are
dry.
Technical specifications
Power 1850 W
Frequency 50 Hz
Voltage 220-240 V
At the end of its service life, this
product may not be disposed of
in the normal household waste,
but rather must be disposed of at
a collection point for recycling electrical and
electronic devices. The materials are recy-
clable according to their labelling. You make
an important contribution to protecting our
environment by reusing, recycling or utiliz-
ing old devices in other ways. Please ask the
municipal administration where the appro-
priate disposal facility is located.
9
2. Connect to power source, 12:00will show
on display. Make sure that the steam control
knob is at the OFFposition,
3. Press down ONbutton for espresso cof-
fee, the red indicator is illuminated, the green
indicator is flashed on the « position. You
should press the PUMPbutton, when there
is water flowing out and close the pump im-
mediately. Then press « button, to
make the green indicator is flashed in the
« position.
4. When the green indicator is illuminated, it
shows that the pre-heating is finished.
Note: during operation, if the green indicator
is flashing, you must turn the steam control
pump, waiting for until the green indicator
is illuminated again, turn the steam control
knob in anti-clockwise, the steam will come
out again.
5. Dip the steam tube into the liquid to be
heated. Turn the steam control knob slowly
in anti-clockwise direction.
6. When the required temperature is reached,
position.
7.
coffee maker.
How to clean & maintenance
1. Cut of power source and let the coffee
maker cool down completely before cleaning.
2. Clean housing of coffee maker with mois-
ture- proof sponge often and clean keeping
warm plate and removable shelf regularly
then leaving them to dry fully.
Note: do not clean with alcohol or solvent
cleanser. Never immerse the housing in wa-
ter cleaning.
3. Detach the metal funnel by turning it clock-
wise, remove the coffee residue inside, then
you can clean it with water and dishwashing
liqquid.
4. Clean all the detachable attachments in the
water and dry thoroughly.
Cleaning mineral deposits (for the section
1. To make sure your coffee maker operating
efficiently, internal piping is cleanly and the
peak flavor of coffee, you should clean away
the mineral deposits left every 2-3 months.
2. Fill the tank with water you can use the
citric acid obtainable from chemists or drug
3. According to the program of pre-heating,
PRE-HEATING.
4. Press down ON button in control panel for
espresso coffee, the indicator of ON
is illuminated, the green indicator is flashing
on the « position, you should press down
the PUMP button, when there is water flow-
ing out and close the pump, and waiting for
a moment, the coffee maker begins to be
heated.
5. When the green lamp is illuminated, it
shows the heating is finish. Pressing the
PUMPbutton again and make two cups
coffee. then close the pump and wait for 5s.
6. Press the « button to make the
green indicator is flashing in the « posi-
tion, waiting until the green indicator is illu-
minated. Make steam for 2 min, then turn the
steam control knob to OFFposition to stop
making steam. Press the ONbutton to stop
the unit immediately, make the scale deposit
in the unit at least 15 minutes.
7. Restart the unit and repeat the steps of 4-6
at least 3 times.
8. Then pressing the « button to make
the green indicator is flashing on the «
position, when the green lamp is illuminated,
press the PUMPto brew until to scale is left.
9.
with tap water in the highest step, repeat the
Table of contents
Languages:
Other NASA electric Coffee Maker manuals
