NATIONAL OUTDOOR LIVING HO76-NT20005-1 User manual

Assembly Instructions
DYNAMIC ILLUMINATIONS LAMP POST ITEM# HO76-NT20005-1
CARE INSTRUCTIONS:
To maintain this item’s pristine condition, wipe product with a clean, soft, dry towel and store in a cool, dry place.
USE:
This tree is self-supporting for temporary installation and also comes with concrete anchors to attach it to patios or concrete pads for permanent
displays.
Once Assembled and in the desired location, review the instructions for the RGB remote (included in the remote's bag) to change the trees color
and light functions.
STORAGE:
Remove nuts from concrete anchors to detach lamp post from the cement .BLFDFSUBJOZPVLFFQBMMBDDFTTPSJFTTUPSFEUPHFUIFS$BSFGVMMZplace
lamp postJOUPUIFDBSUPOBOEUBQFitDMPTFE
ASSEMBLY:
1. Carefully remove all items from boxes and remove any packing materials. It is best to assemble this item
in the location you intend to display it. ITEM IS RATED FOR INDOOR/OUTDOOR USE.
2. Connect the male Coaxial plug on the base of the lamp post to the female coaxial plug on the driver and
power cord. Make sure connection is secure.
3. Plug the Lamp post into a UL approved extension cord or outlet.
NOTE: If you are using concrete anchors to attach this item for permanent installations, please see
page 2 for more detailed instruction.
1
PARTS LISTING EACH DYNAMIC ILLUMINATIONS LAMP
POST Contains:
(1)DYNAMIC ILLUMINATIONS LAMP POST
(1) POWER CORD with DRIVERE
(6) CONCRETE ANCHORS
(1) REMOTE
TOOLS REQUIRED FOR INSTALLATION NOT INCLUDED:
(1) PERCUSSION DRILL
(1) WRENCH
REMOTE
CONCRETE ANCHORS
POWER CORD W/ DRIVER

Assembly Instructions
DYNAMIC ILLUMINATIONS
LAMP POST ITEM# HO76-NT20005-1
2
Step 1:
Place the lamp at the installation
position and drill 6 corresponding
holes according to the installation
hole position of the lamp base
Step2:
Fix the expansion screw on
the ground with a wrench
Step 3:
Place the lamp post over the
screws so that the corresponding
holes in the lamp base fit over the
screws.
Step 4:
Use the wrench to fix the nuts
onto the screw heads, securing
the lamp to its permenant
position.
Step 5:
Make sure lamp post is secure,
It may be necessary to go back
to tighten the nuts to make sure
that the lamp is properly
secure.