Navman iCN 700 Series User manual

with SmartS™2006
Upgrade to 2006 SE maps
Map Installation Guide
iCN 700 Series
en
da
de
es
fr
fc
it
nl
sv
2
19
36
55
73
92
111
130
149

© 2006 Brunswick New Technologies Asia Pte Limited. Navman is a registered trademark of
Brunswick New Technologies Asia Pte Limited and is used under licence by Navman New Zealand.
Navman is part of the Brunswick Corporation, headquarters Chicago, IL. All rights reserved.
The software contains proprietary information of Navman; it is provided under a licence agreement
containing restrictions on use and disclosure and is also protected by copyright law. Reverse
engineering of the software is prohibited.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior
written permission of Navman.
Back-On-Track, Drive-Away, Smart5and Turn-by-Turn are either registered trademarks or
trademarks of Brunswick New Technologies Asia Pte Limited and are used under licence by Navman
New Zealand. All rights reserved.
Microsoft Windows 2000 SP4 and XP SP2, Microsoft Internet Explorer and ActiveSync are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries. All rights reserved.
Adobe and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries. All rights reserved.
Location Identifiers © 2005 International Air Transport Association.
All other trademarks and registrations are the property of their respective owners.
Published in New Zealand.

iCN 700 Series - Map Installation Guide
3
Disclaimer
Due to continued product development this information may change without notice. Navman does not
warrant that this document is error-free.
The screenshots and other presentations shown in this manual may differ from the actual screens
and presentations generated by the actual product. All such differences are minor and the actual
product will deliver the described functionality as presented in this User Manual in all
material respects.
Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
The software is based in part on the work of the Independent JPEG Group.

iCN 700 Series - Map Installation Guide
4
Important safety information
PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT
IN VEHICLE
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in property damage.
Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s
safety or make it illegal to operate in some jurisdictions.
Follow all product instructions and all instructions in your vehicle owner’s manual regarding
accessories or modifications.
Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories
or modifications.
It is your sole responsibility to place, secure and use the iCN in a manner that will not cause
accidents, personal injury or property damage. Always observe safe driving practices.

iCN 700 Series - Map Installation Guide
5
Mount the iCN in a position that is secure and does not obstruct the driver’s view.
Do not mount the iCN in a way that may interfere with the safe operation of the vehicle, the
deployment of air bags or other safety equipment.
Do not operate the iCN while driving.
Before you use your iCN for the first time, familiarize yourself with your device and its operation.
On main roads, the distance to an exit calculated by the iCN may be further than the distance shown
on road signs. Road signs show the distance to the start of an exit while your iCN shows the distance
to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow
distance information on road signs.
The use of information regarding safety or speed camera locations may be subject to local laws in the
country of use. You are responsible for checking that you can legally use the information in your
country or in the country where the information will be used.
Do not handle the iCN while it is hot. Let the product cool, out of direct sunlight.
Do not expose the iCN to direct sunlight in an unattended vehicle for prolonged periods. Overheating
may damage the unit.
To discourage theft, do not leave the iCN, mounting bracket or any cables in plain view in an
unattended vehicle.
Failure to adhere to these warnings and cautions may lead to death, serious injury or property
damage. Navman disclaims all liability for installation or use of the iCN that causes or
contributes to death, injury or property damage or that violates any law.

iCN 700 Series - Map Installation Guide
6
Welcome
Thank you for purchasing new Navman maps. This Map Installation Guide has been
designed to help you install these maps to your iCN.
To install the maps, first install Smart5™ Desktop software on your computer, then
use it to install the required maps from the map CDs to your iCN internal memory or
memory card.
If you already have Smart5Desktop installed on your computer, you need to reinstall the
software from the enclosed Application Installer CD as it may contain an updated version.
Box Contents
Item Item
CDs containing:
Smart52006
software, including
Smart5Desktop
Smart52006 SE
map data
Acrobat®Reader®5.1
The number of discs
included depends on
the country of
purchase.
Documentation including:
Map Installation
Guide
Global Support
Information
Software Product
Licence

iCN 700 Series - Map Installation Guide
7
What is Smart5Desktop?
Smart5Desktop is software for your computer and is used to install maps to
your iCN.
You can also use it to:
remove maps from your iCN
obtain software updates
manage Custom Points of Interest.

iCN 700 Series - Map Installation Guide
8
Can I use Smart5Desktop with my computer?
Ensure your computer has the following minimum system requirements before
installing Smart5Desktop:
IBM compatible PC
Microsoft®Windows®2000 SP4 or XP SP2 (NT not supported)
Internet Explorer 6 or higher
CD drive
USB port
Internet connection for registration.
You must install Smart5Desktop from the Application Installer CD onto your
computer hard drive; you cannot run Smart5Desktop from the CD.
What is Microsoft ActiveSync®?
Microsoft ActiveSync is used to establish a connection between your iCN and your
computer. ActiveSync 3.8 will be installed on your computer (if a later version of
ActiveSync is not already installed) as part of the installation of Smart5Desktop.
After it is installed, ActiveSync will run in the Windows System Tray/Notification Area
when you start Windows. ActiveSync will activate when your iCN is connected to
your computer.
For more information on ActiveSync, search for "ActiveSync" at www.microsoft.com.

iCN 700 Series - Map Installation Guide
9
How do I install Smart5Desktop onto my computer?
Before you begin:
Ensure that your computer meets the minimum system requirements for Smart5Desktop,
especially:
i. Ensure that Internet Explorer 6 or higher is installed on your computer before you install
Smart5Desktop, even if it is not your default browser.
ii. Windows XP users, ensure that Windows XP Service Pack 2 or higher has been applied
before you install Smart5Desktop.
1. Close all open programs on your computer.
2. Insert the Smart5Application Installer CD into your computer CD drive.
The Smart5Desktop installer will start.
If your computer does not automatically launch the CD, start the installation
manually:
Start > Run.
Type D:\Install.exe where “D” is the letter assigned to your CD drive, then
click OK.

iCN 700 Series - Map Installation Guide
10
3. Select your preferred language for Smart5Desktop.
4. Click Install SmartST Desktop.
5. Follow the screen prompts to install Smart5Desktop:
Review and accept the Licence Agreement for Smart5Desktop and
Microsoft ActiveSync (if not already installed on your computer) when
prompted.
Select a destination folder for Smart5Desktop when prompted.
When the installation has finished, click Finish.
Smart5Desktop will open.
6. If prompted to connect your iCN to your computer, complete the following:
Plug the large end of the USB cable directly into a USB port on your
computer (not a USB hub) and plug the small end into the USB Socket ()
on the side of your iCN.
Where possible, plug the USB cable into a USB port at the back of your computer.
Plug the small end of the AC Power Pack cable into the socket on the
side of your iCN; plug the other end into the mains.
Press
O.
Your iCN will turn on.

iCN 700 Series - Map Installation Guide
11
When the following screen displays on your iCN, click Next:
Microsoft ActiveSync will synchronize with your iCN.
7. If prompted to update your iCN software, follow the on-screen prompts.
You are now ready to use Smart5Desktop to install maps to your iCN.

iCN 700 Series - Map Installation Guide
12
How do I keep Smart5up-to-date?
We recommend that you regularly use Smart5Desktop to check the Navman server
for Smart5software updates.
Updating vs. Upgrading
Updating software is different from upgrading software:
When you update Smart5, the latest service packs and bug fixes are downloaded from the
Navman server and applied to your iCN.
To upgrade Smart5, you must first purchase a new version of Smart5from a retailer, then
install it on your iCN.
1. If you connect to the Internet via a dial-up connection, connect to the Internet
now.
2. Open Smart5Desktop, follow the prompts, and then click Check for updates.
Your computer will connect to the Navman server to check for software updates.
3. If a software update is available, complete the following:
a) Click Update available.
The Navman website will open.
b) Select the update for your region and download it to your computer.
c) On the Setup menu, point to Update software, and then click Update
software on iCN.
Follow the prompts to update your iCN software.

iCN 700 Series - Map Installation Guide
13
How do I remove old maps from my iCN?
You cannot use a 2006 map and a 2006 SE map of the same area at the same time.
Complete the following steps for each map you are upgrading:
1. Open Smart5Desktop, if it is not already open:
Start > All Programs > Navman > SmartST Desktop 2006
2. Click the View/Remove Maps tab.
The View/Remove tab will open, displaying a list of installed maps.
3. Select the name of the map you want to remove from the list, then click Remove.
4. Confirm that you want to remove the selected map when prompted.
The map is removed from your iCN.

iCN 700 Series - Map Installation Guide
14
How do I install new maps onto my iCN?
You cannot navigate a route between different version maps, for example a 2006 map and a
2006 SE map.
You can install maps from the enclosed CDs to a memory card (not included) or your
iCN internal memory.
Map Product Key
You will be prompted to enter the key during the activation of the new maps.
Your Map Product Key can be found on the back cover of this Map Installation Guide.
Additional Map Product Keys may be purchased from the Navman Online Store.
Installing new maps
To install new maps onto your iCN, complete the following steps:
1. Open Smart5Desktop, if it is not already open:
Start > All Programs > Navman > SmartST Desktop 2006
2. Insert a Smart5Map CD into your computer CD drive.
The preactivated maps that are ready to be installed to your iCN are
light green.
The maps on the CD that require activation before being installed to your
iCN are light blue.
If your computer opens Windows Explorer when the CD is inserted, close the
Windows Explorer window.

iCN 700 Series - Map Installation Guide
15
3. Complete the following:
If the map to be installed is ... Then ...
light green go to step 6.
light blue the map needs to be activated via the Internet
before it can be installed; continue to step 4.
4. If you connect to the Internet via a dial-up connection, connect to the Internet
now.
5. Follow the prompts to activate your Map Product Key, including:
Enter the Map Product Key when prompted.

iCN 700 Series - Map Installation Guide
16
Your computer will connect to the Internet and activate your Map
Product Key.
When activation has completed, the map will change colour to light green;
continue to step 6.
6. Click the map you want to install to your iCN.
The map will change colour to dark green to indicate it has been selected. The
map is now listed in the Review Selected Maps section of the Add Maps tab.
To deselect a map, click the map again.
You may need to install multiple maps to cover the desired geographical
area.
7. Complete the following:
If you want to ... Then ...
select a light green map go back to step 6.
select a light blue map the map needs to be activated via the Internet before
it can be installed; go back to step 4.
select a Major Road Network. select the check box in the Step 1: Select Maps
section.

iCN 700 Series - Map Installation Guide
17
If you want to ... Then ...
install the selected maps to your
iCN continue to step 8.
8. In the Step 3: Install Maps section, select the destination media for the selected
maps, for example, memory card or iCN internal memory.
9. Click Install Maps.
When they have been installed, the map or maps will change colour to yellow.
10. To use your iCN, disconnect the USB cable.
WARNING Do not disconnect the USB cable from the iCN USB Socket until the
Globe has refreshed, and the installed map or maps have changed colour to yellow.

iCN 700 Series - Map Installation Guide
18
Further information
For information on how to use Smart52006, see the iCN 700 Series User Manual.
iCN 700 Series User Manual
The iCN 700 Series User Manual can be accessed from either:
the Docs folder on the Application Installer CD, or
Smart5Desktop - Help > Read User Manual
Acrobat Reader is required to view the iCN 700 Series User Manual.

iCN 700 Series - Installationsvejledning til kort
19
© 2006 Brunswick New Technologies Asia Pte Limited. Navman er et registreret varemærke
tilhørende Brunswick New Technologies Asia Pte Limited og anvendes under licens af Navman New
Zealand. Alle rettigheder forbeholdes.
Softwaren indeholder beskyttede oplysninger tilhørende Navman. Den forefindes under en
licensaftale, der indeholder begrænsninger for brug og offentliggørelse og er desuden beskyttet af
ophavsretlig lov. Der må ikke foretages reverse engineering.
Ingen dele af denne publikation må gengives, lagres i et genfindingssystem eller overføres i nogen
form eller på nogen måde, uanset om det sker elektronisk, mekanisk, ved fotokopiering, optagelse
eller på anden måde, uden skriftlig tilladelse fra Navman.
Back-On-Track, Drive-Away, Smartog Turn-by-Turn er enten registrerede varemærker eller
varemærker tilhørende Brunswick New Technologies Asia Pte Limited og bruges under licens af
Navman New Zealand. Alle rettigheder forbeholdes.
Microsoft Windows 2000 SP4 og XP SP2, Microsoft Internet Explorer og ActiveSync er enten
registrerede varemærker eller varemærker tilhørende Microsoft Corporation i USA og/eller andre
lande. Alle rettigheder forbeholdes.
Adobe og Acrobat Reader er enten registrerede varemærker eller varemærker tilhørende Adobe
Systems Incorporated i USA og/eller andre lande. Alle rettigheder forbeholdes.
Location Identifiers © 2005 International Air Transport Association.
Alle andre varemærker og registreringer tilhører de respektive ejere.
Udgivet i New Zealand.

iCN 700 Series - Installationsvejledning til kort
20
Ansvarsfraskrivelse
På grund af den fortløbende produktudvikling kan disse oplysninger ændres uden varsel. Navman
kan ikke garantere, at dette dokument er uden fejl.
Skærmbilleder og andre præsentationer i brugervejledningen kan afvige fra de faktiske skærmbilleder
og præsentationer, der vises i det virkelige produkt. Disse forskelle er ubetydelige, og det faktiske
produkt fungerer som beskrevet i denne brugervejledning i al væsentlighed.
Overensstemmelse
Denne enhed er i overensstemmelse med del 15 i FCC-reglerne. Følgende to betingelser skal være
opfyldt, for at enheden fungerer korrekt: (1) Enheden må ikke forårsage interferens, og (2) enheden
skal acceptere interferens, herunder interferens, som kan forårsage uønsket drift.
Softwaren er delvist baseret på arbejdet i Independent JPEG Group.