NCR VOYIX 7772-K915 User manual

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited
7772-K915
Issue C
XL15WMounting Bracket
Kit Instructions

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
2
Copyright
The product described in this document is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation. NCR CX7 All-in-One POS (7772) is a trademark of NCR
Corporation in the United States and/or other countries. Other product names mentioned in this publication may be
trademarks or registered trademarks of their respective companies and are hereby acknowledged.
Java is a registered trademark of Oracle and/or its affiliates.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is permitted under
the terms and conditions of an agreement you have with NCR, NCR's copyright notice must be included.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware
become available. NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some
instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR
representative or NCR office for information that is applicable and current.
Copyright © 2021–2024
By NCRCorporation
Global Headquarters
864 Spring St. NW
Atlanta, GA 30308
United States
All Rights Reserved

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
3
Table of Contents
Copyright 2
XL15WMounting Bracket 5
Kit Contents 5
Installation Procedure 6

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
4
Revision Record
Issue Date Remarks
A Apr 2021 First Issue
B Dec 2021 Added Warning statement
C Dec 2023 Added illustration in the Introduction
Added XL15

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
5
XL15WMounting Bracket
This kit provides a mounting bracket to install the XL15 or XL15WDisplay on the neck of
the NCR CX7 All-in-One POS (7772).
Kit Contents

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
6
Installation Procedure
Warning
Disconnect the AC power cord from the AC outlet and wait 30 seconds before
servicing the terminal.
1. Remove the two (2) screws that secure the Front Neck Cover to the Neck.
a. flat head screws for Base without Integrated Power Supply
b. thumbscrews for Base with Integrated Power Supply
2. Pivot the Front Neck Cover away from the Neck.

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
7
3. Lay the Display face down on a flat surface.
Note
Always use a soft material (cloth, foam) to protect the display screen when
placing the terminal face down.
4. Remove the Base Rear Foot (2 screws).
5. Pivot the Back Neck Cover away from the Neck. The Cover has a simple snap fit
connection at the top.

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
8
6. Install the XL15WMounting Bracket on the Neck.
a. Insert the Bracket Hooks on the Neck.
b. Secure the Bracket to the Neck with two (2) screws.

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
9
7. Mount the new Back Neck Cover (included in the kit) on the Neck. The Cover has a
simple snap fit connection at the top.
8. Reinstall the Base Rear Foot.
9. Reinstall the Front Neck Cover.
10. Connect the XL15 / XL15W Display Power Cable and Display Port Cable and route
them as shown.

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
10
11. Hook the XL15 / XL15WDisplay on the two (2) tabs of the Mounting Bracket.
12. Tighten the thumbscrews to secure theXL15 / XL15W Display.

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
11
13. Connect the XL15 / XL15W Display Cables to the CX I/O Base.