Nebula ONE User manual

USER MANUAL
Read carefully before using the device and save these instructions.
ONE

USER MANUAL
1
Table of Contents.....................................................Page
1. An introduction to your new Nebula Device................................2
2. Packaging List of Components...................................................4
3. Getting Started.......................................................................5
4. Charging................................................................................7
5. Power Indicator.......................................................................8
6. Power On Indicator..................................................................9
7. Setting Your Temperature.......................................................10
8. Reset..................................................................................11
9. Warranty..............................................................................12
10. Company Contact Information...............................................13

An introduction to your Nebula One
The One is a powerful yet versatile pen-style leaf vaporizer that hits
harder than devices 5expensive. more much temperature settings
provide you with 5options to enjoy your fav uo rite strains just the
way you like it. At the core of this powerful vaporizer is a patent
pending ceramic heating chamber that utilizes a helical air-path
channel to providing both convection and conduction heating
simultaneously. It optimizes heating power, surface area, and
airflow for the most satisfying user experience. A fully isolated air
path provides a pristine, clean taste. Use the included water-pipe
adapter for an amazing session with your glass bong. Vuapo r is
so pure that you will barely clean your glassware! Simply grind
your material and pack it into the ceramic bowl, and the
One
Nebula
is ready go! to
• Simple Yet Powerful
• LED Light Indicator
• Built in Li-ion Battery
• Ceramic Heating Chamber
• Water Pipe Adaptor
2

3
An Introduction to Your New Device
O Ring
Top Cap
Power Button
LED Light
Display
Battery
Ceramic Heating
Chamber

4
Packaging List of Components
Things included in the box are following:
1* OneNebula 1 * Cleaning Brush
1* Extra O Ring
1* USB Cable
1 *Water
Pipe Adaptor
1 * Quick Guide
1 * Packing Tool
2* Stainless Steel Mesh
(Mesh Number:200)
Silicone Sleeve

Twist and pull off the top cap.
1.
Load grinded materials into the
ceramic bowl.
2.
5
Getting Started
(We only recommend loading
0.1g-0.3g of material each time to
get the best vaping experience.)

Twist and press on the top cap.
3.
Quickly press the power button 5
times to turn on het .One Press
and hold the power button for
2 seconds to start your session. After
flashing for about 30 seconds, the
LED will remain lit to indicate that
One is ready for use.
4.
6
Getting Started
Power Button
LED Indicator
You can enjoy this session in 90 seconds.

7
Charging
To charge, connect the One to a wall adaptor via the USB cable.
we recommend to use 1 Amp wall adaptor.
Note:
Please disconnect OneNebula from
the charger once the red
unattended. charging
leave not Do charged.
fully when off turn to shows
light

8
Power Indicator
Battery life remaining is displayed by the LED in the format below：
While the device is on, simply press the power button once to
show the battery life.
Power Button
80-100% battery life
60-79% battery life
40-59% battery life
20-39% battery life
0-19% battery life

9
Power On Indicator
When the device is on, the red led indtcator near the USB port
will remain lit.
The device will automatically turn off when there is no action
for 10 minutes.
Power On Indtcator

10
Quickly press the power button 2X while the device is ON to
adjust the temperature. The LED will flash below the tempera-
ture markings to indicate the current temperature level. Press
the power button 2X to increase to the next temperature level.
You may cycle through the five temperature levels this way to
reach your desired temperature setting.
Setting Your Temperature
Press and hold the power button until the LED turns off to
confirm and exit the temperature adjustment setting. Alterna-
tively, you may simply wait until the LED turns off automatically
to confirm and exit the temperature adjustment setting.

11
Reset to factory default settings: When the device is off, press
and hold the power button for 10 seconds to restore the factory
default settings. The LED will remain lit for 5 seconds to confirm
that reset has been completed.
10 Seconds
Reset

12
Nebula Product Replacement
Warranty
This warranty provides free replacement of an authentic Nebula product
if it malfunctions due to manufacturing defects. This warranty does not
cover any damages outside of expected normal use.
Void of Warranty
Any one of the following conditions will void the warranty:
Voiding the warranty is not limited to the conditions stated above. This
warranty only covers authentic Nebula brand products and is valid for
one year from the user’s date of purchase.
Failure to provide original receipt of purchase.
1.
2.
Product failure or damage due to the use of excessive force or user
negligence (i.e. dropping the device, submerging the device in
liquids, etc.).
3.
Product failure or damage caused by using incompatible parts or
wires (i.e. using the wrong power cable, etc.).
4.
Product failure or damage due to improper use or unauthorized
repair or alteration.

13
Contact Information
Nebula
Addres
LTD
s: 25 UK Peterborough, Square, Benedict
Email: [email protected]
Web: www nebulavaporizers. .com