NEC LCD1855NX - MultiSync - 18.1" LCD Monitor User manual

MultiSync® LCD1855NXTM
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 1
All manuals and user guides at all-guides.com
all-guides.com

Table of Contents
Warning .......................................................................................................... 1
Contents........................................................................................................ 2
Connecting the Display .............................................................................. 3
Control Panel Functions ............................................................................ 4
On Screen Display (OSD) Control A justment........................................ 6
On Screen Display (OSD) Selection an A justment ............................ 7
Troubleshooting ........................................................................................ 10
Recommen e Use .................................................................................... 12
Specifications ............................................................................................ 14
References .................................................................................................. 16
Limite Warranty ...................................................................................... 17
Avertissement ............................................................................................ 19
Contenu ...................................................................................................... 20
Connexion u moniteur............................................................................ 21
Fonctions u panneau e comman e .................................................. 22
Réglages u menu à l'écran (OSD) ........................................................ 24
Sélection et réglage e l'OSD ................................................................ 25
Résolution es problèmes ...................................................................... 28
Usage recomman é .................................................................................. 30
Spécifications ............................................................................................ 32
Références.................................................................................................. 34
Garantie limitée ........................................................................................ 35
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 2
All manuals and user guides at all-guides.com

1
Canadian Department of Communications Compliance Statement
DOC: This Class B igital apparatus meets all requirements of the Cana ian
Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark an is in compliance with Cana ian Safety Regulations
accor ing to CAN/CSA C22.2 No. 950.
FCC nformation
1. Use the attache specifie cables with the NEC MultiSync®LCD1855NXTM color
monitor so as not to interfere with ra io an television reception.
(1) Please use the supplie power cor or equivalent to ensure FCC compliance.
(2) Please use the supplie shiel e vi eo signal cable.
Use of other cables an a apters may cause interference with ra io an television
reception.
2. This equipment has been teste an foun to comply with the limits for a Class B
igital evice, pursuant to part 15 of the FCC Rules. These limits are esigne to
provi e reasonable protection against harmful interference in a resi ential instal-
lation. This equipment generates, uses, an can ra iate ra io frequency energy, an ,
if not installe an use in accor ance with the instructions, may cause harmful
interference to ra io communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment oes cause
harmful interference to ra io or television reception, which can be etermine by
turning the equipment off an on, the user is encourage to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment an receiver.
• Connect the equipment into an outlet on a circuit ifferent from that to which
the receiver is connecte .
• Consult your ealer or an experience ra io/TV technician for help.
If necessary, the user shoul contact the ealer or an experience ra io/television
technician for a itional suggestions. The user may fin the following booklet, prepare
by the Fe eral Communications Commission, helpful: “How to I entify an Resolve
Ra io-TV Interference Problems.” This booklet is available from the U.S. Government
Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.
WARN NG
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S
POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY
INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUT ON
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO
THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulate voltage within the unit may have sufficient magnitu e to cause electric shock.
Therefore, it is angerous to make any kin of contact with any part insi e this unit.
This symbol alerts the user that important literature concerning the operation an maintenance of this unit has been
inclu e . Therefore, it shoul be rea carefully in or er to avoi any problems.
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 1
All manuals and user guides at all-guides.com

2
Contents
Your new NEC MultiSync®LCD1855NXTM monitor box* shoul contain the
following:
• NEC MultiSync LCD1855NX monitor with tilt/swivel stan
• Power Cor
• Vi eo Signal Cable (D-Sub)
• User’s Manual
MultiSync® LCD1855NXTM
* Remember to save your original box an packing material to transport or ship the monitor.
Power Cor
Vi eo Signal Cable
(D-sub)
User’s Manual
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 2
All manuals and user guides at all-guides.com

3
Connecting the Display
Using the Computer
1. Connect the signal cable. When attache , tighten the thumbscrews to secure the
connection.
2. Connect the power cor into a proper power outlet that is easily accessible an close
to the isplay.
Power Cord
Digital signal
DV -D
Wall-outlet
PC-outlet
PC
MAC
Mac Cable A apter
(not inclu e )
Analog signal
D-sub
Signal Cable
(not inclu e )
(not inclu e )
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 3
All manuals and user guides at all-guides.com

4
Control Panel Functions
Front Panel Controls
54321
Use this button to turn the isplay on or off.
This In icator lights up green when the isplay
operates normally. If the isplay is in DPMS (Energy
Saving) mo e, this in icator color changes to amber.
Use this button to enter a selection in the On Screen
Display.
Use these buttons to choose or a just items in the On
Screen Display.
Use this button to enter or exit the On Screen Display.
Use this button to make Dsub or DVI connector active.
Power Button
Power (DPMS) ndicator
AUTO/SELECT Button
Buttons
MENU Button
SOURCE Button
Control Function
1
2
3
4
5
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 4
All manuals and user guides at all-guides.com
all-guides.com

5
Control Panel Functions –continued
AUTO adjustment function
When a justing your isplay settings, always press the
AUTO/SELECT button before entering the On Screen Display
(OSD). This will automatically a just your isplay image to the
i eal settings for the current screen resolution size ( isplay
mo e).
The best isplay mo e is 1280x1024.
Bring up Contrast an Brightness a justment.
SOURCE
Use this button to make Dsub or DVI connector active. This fea-
ture is use when two computers are connecte to the isplay.
The efault setting is Dsub.
CONTROLS LOCKED/UNLOCKED: MENU and
This function allows you to secure the current control settings,
so that they cannot be ina vertently change . Press an hol
the MENU button an button for 3 secon s: the message
“CONTROLS LOCKED” appears.
You can unlock the OSD controls at any time by pushing the
MENU button an button for 3 secon s: the message
“CONTROLS UNLOCKED” will appear.
Control Direct Access Function
2
3
5
100
100
CONTROLS LOCKED
CONTROLS UNLOCKED
PROCESSING
AUTO CONFIGURATION
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 5
All manuals and user guides at all-guides.com

6
On Screen Display (OSD) Control
Adjustment
Screen Adjustment
Making a justments to the image size, position an operating parameters of the isplay
is quick an easy with the On Screen Display Control system. A short example is given
below to familiarize you with the use of the controls. The following section is an outline
of the available a justments an selections you can make using the OSD.
NOTE: Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make a justments in the On Screen Display, follow these steps:
1. Press the MENU Button, then the main menu of the OSD appears.
2. To access a control, use the or Buttons. When the icon you want becomes
highlighte , press the AUTO/SELECT Button.
3. Use the Buttons to a just the item to the esire level.
4. Accept the changes by pressing the AUTO/SELECT Button.
5. Exit the OSD by Pressing the MENU Button.
AUTO/SELECT
AUTO/SELECT
MENU
MENU
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 6
All manuals and user guides at all-guides.com

7
On Screen Display (OSD)
Selection and Adjustment
The following table in icates all the On Screen Display control, a justment, an setting menus.
To a just the brightness an
contrast of the screen
To customize the color of the screen
To a just the position of the screen
To improve the clarity an
stability of the screen
To customize the screen status
for a user's operating environment
: A justable
A : Analog Input
D : Digital Input
Main menu Sub menu AD Reference
BR GHTNESS
CONTRAST
COLOR
POS T ON
TRACK NG
SETUP
BRIGHTNESS
CONTRAST
PRESET 9300K
6500K
R/G/B (User Color)
V POSITION
H POSITION
CLOCK
PHASE
LANGUAGE
IMAGE SIZE
OSD POSITION
SIGNAL
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 7
All manuals and user guides at all-guides.com

8
On Screen Display (OSD)
Selection and Adjustment –continued
You were intro uce to the proce ure of selecting an a justing an item using the OSD
system. Liste below are the icons, icon names, an icon escriptions of the all items
shown on the Menu.
To adjust the brightness and contrast of the screen
OSD Adjust Description
Brightness
To a just the brightness of the screen.
Contrast
To a just the contrast of the screen.
BRIGHTNESS / CONTRAST
88
100
To customize the color of the screen
OSD Adjust Description
9300K/6500K
Select the screen color.
• 9300K: Slightly bluish white.
• 6500K: Slightly re ish white.
Set your own color levels.
PRESET
RED
GREEN
BLUE
COLOR
PRESET 9300K 6500K
RED
GREEN
BLUE
To adjust the position of the screen
OSD Adjust Description
Vertical Position
To move image up an own.
Horizontal Position
To move image left an right.
POSITION
61
39
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 8
All manuals and user guides at all-guides.com

9
On Screen Display (OSD)
Selection and Adjustment –continued
To improve the clarity and stability of the screen
To minimize any vertical bars or stripes
visible on the screen backgroun . The
horizontal screen size will also change.
To a just the focus of the isplay.
This item allows you to remove any
horizontal noise an clear or sharpen the
image of characters.
CLOCK
PHASE
TRACKING
CLOCK
PHASE
To customize the screen status for a user's operating environment
To choose the language in which the
control names are isplaye .
This function isplays the image in its
original size or enlarge size so as to fit
in the full screen of the LCD panel.
To a just position of the OSD win ow on
the screen.
To select DSUB ANALOG or DVI DIGITAL
as the active input. This feature is use
when two computers are connecte to
the isplay. The isplay automatically
etects the proper input when only one
vi eo source is connecte .
LANGUAGE
MAGE S ZE
OSD
POS T ON
S GNAL
LANGUAGE ENGLISH
FULL
IMAGE SIZE
SETUP
OSD POSITION
SIGNAL DSUB ANALOG
[email protected]
DSUB ANALOG
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 9
All manuals and user guides at all-guides.com
all-guides.com

10
Have you installed the display driver?
No image appears
Troubleshooting
Check the following before calling for service.
• Check an see if the power cor is connecte
properly to the power outlet.
• Press the Power button.
• A just the brightness an the contrast.
• If the isplay is in power saving mo e, try moving the
mouse or pressing any key on the keyboar to bring up
the screen.
• This message appears when the signal from the PC
(vi eo car ) is out of horizontal or vertical frequency
range of the isplay.
See the 'Specifications' section of this manual an
configure your isplay again.
• This message appears when the signal cable between your
PC an your isplay is not connecte . Check the signal
cable an try again.
• s the power cord of the
display connected?
• s the power indicator light
on?
• s the power on and the
power indicator green?
• s the power indicator
amber?
• Do you see an " NPUT
S GNAL OUT OF RANGE"
message on the screen?
• Do you see a "NO
S GNAL" message on the
screen?
• Be sure to install the isplay river. You can ownloa the
river from our web site: http://www.necmitsubishi.com
• Have you installed the dis-
play driver?
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 10
All manuals and user guides at all-guides.com

11
Display image is incorrect
• Press the AUTO/SELECT button to automatically a just
your isplay image to the i eal setting
If the results are unsatisfactory, a just the image
position using the H position an V position icon in
the on screen isplay.
• Press the AUTO/SELECT button to automatically a just
your isplay image to the i eal setting If the results are
unsatisfactory, ecrease the vertical bars or stripes
using the CLOCK icon in the on screen isplay.
• Press the AUTO/SELECT button to automatically a just
your isplay image to the i eal setting
If the results are unsatisfactory, ecrease the horizontal
bars using the PHASE icon in the on screen isplay.
• Display Position is incorrect.
• On the screen background,
vertical bars or stripes are
visible.
• Any horizontal noise
appearing in any image or
characters are not clearly
portrayed.
Troubleshooting –continued
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 11
All manuals and user guides at all-guides.com

12
Recommended Use
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN
SETTING UP AND USING THE MULTISYNC LCD COLOR MONITOR:
• DO NOT OPEN THE MONITOR. There are no user serviceable parts insi e an opening or
removing covers may expose you to angerous shock hazar s or other risks. Refer all
servicing to qualifie service personnel.
• Do not spill any liqui s into the cabinet or use your monitor near water.
• Do not insert objects of any kin into the cabinet slots, as they may touch angerous
voltage points, which can be harmful or fatal or may cause electric shock, fire or
equipment failure.
• Do not place any heavy objects on the power cor . Damage to the cor may cause
shock or fire.
• Do not place this pro uct on a sloping or unstable cart, stan or table, as the monitor
may fall, causing serious amage to the monitor.
• When operating the LCD monitor with its AC 220-240V power supply, use a power sup-
ply cor that matches the power supply voltage of the AC power outlet being use . The
power supply cor you use must have been approve by an comply with the safety
stan ar s of your country.
• Do not place any objects onto the monitor an o not use the monitor out oors.
• The insi e of the fluorescent tube locate within the LCD monitor contains mercury.
Please follow the bylaws or rules of your municipality to ispose of the tube properly.
Imme iately unplug your monitor from the wall outlet an refer servicing to qualifie
service personnel un er the following con itions:
• When the power supply cor or plug is amage .
• If liqui has been spille , or objects have fallen into the monitor.
• If the monitor has been expose to rain or water.
• If the monitor has been roppe or the cabinet amage .
• If the monitor oes not operate normally by following operating instructions.
• Do not ben power cor .
• Do not use monitor in high temperature, humi , usty, or oily areas.
• If glass is broken, han le with care.
• Do not cover vent on monitor.
• If monitor or glass is broken, o not come in contact with the liqui crystal an han le
with care.
•Allow a equate ventilation aroun the monitor so that heat can properly
issipate. Do not block ventilate openings or place the monitor near a
ra iator or other heat sources. Do not put anything on top of monitor.
•The power cable connector is the primary means of etaching the system
from the power supply. The monitor shoul be installe close to a power
outlet which is easily accessible.
•Han le with care when transporting. Save packaging for transporting.
CAUT ON
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 12
All manuals and user guides at all-guides.com

13
Recommended Use –continued
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR
CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE
FOLLOWING WHEN YOU POSITION THE MONITOR:
• For optimum performance, allow 20 minutes for warm-up.
• A just the monitor height so that the top of the screen is at or
slightly below eye level. Your eyes shoul look slightly ownwar
when viewing the mi le of the screen.
• Position your monitor no closer than 16 inches an no further
away than 28 inches from your eyes. The optimal istance is 23
inches.
• Rest your eyes perio ically by focusing on an object at least 20
feet away. Blink often.
• Position the monitor at a 90° angle to win ows an other light
sources to minimize glare an reflections. A just the monitor
tilt so that ceiling lights o not reflect on your screen.
• If reflecte light makes it har for you to see your screen, use an anti-glare filter.
• Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoi using any
cleaning solution or glass cleaner!
• A just the monitor’s brightness an contrast controls to enhance rea ability.
• Use a ocument hol er place close to the screen.
• Position whatever you are looking at most of the time (the screen or reference materi-
al) irectly in front of you to minimize turning your hea while you are typing.
• Avoi isplaying fixe patterns on the monitor for long perio s of time to avoi image
persistence (after-image effects).
• Get regular eye checkups.
Ergonomics
To realize the maximum ergonomics benefits, we recommen the following:
• Use the preset Size an Position controls with stan ar signals
• Use the preset Color Setting
• Use non-interlace signals with a vertical refresh rate between 60-75Hz
• Do not use primary color blue on a ark backgroun , as it is ifficult to see an may
pro uce eye fatigue to insufficient contrast
For more etaile information on setting up a healthy work environment, call
NEC-Mitsubishi Electronics Display of America at (888) NEC-MITS, NEC-Mitsubishi
FastFacts™ information at [phone] an request ocument #900108 or write the
American National Stan ar for Human Factors Engineering of Visual Display Terminal
Workstations – ANSI-HFS Stan ar No. 100-1988 – The Human Factors Society, Inc. P.O. Box
1369, Santa Monica, California 90406.
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 13
All manuals and user guides at all-guides.com

14
Specifications
18.1 inches (46.0 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
18.1 inches viewable
0.28mm pixel pitch
Horizontal Freq. 31.5 - 80 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
Digital
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7Vp-p/75ohm),Digital
Max Digital: VESA 1280 x 1024@60Hz
Analog: VESA 1280 x 1024@75Hz
Recommen e VESA 1280 x 1024@60Hz
DDC/2B
Normal 53W
Stan -by/Suspen 3W
Power Off 2W
Wi th 16.0 inches /406 mm
Height 16.9 inches /429 mm
Depth 8.5 inches /215 mm
Net 17.6 lbs /8.0 kg
Tilt -5°~30°
Swivel 340°
AC 100-240V 50/60Hz 1.0A
Operating Con itions
Temperature 5°C to 35 °C
Humi ity 30 % to 80 % non-Con ensing
Storage Con itions
Temperature -10°C to 60 °C
Humi ity 10 % to 85 % non-Con ensing
UL, c-UL, FCC-B, Energy Star
Display
Sync nput
Video nput
Resolution
Plug & Play
Power Consumption
Dimensions &Weight
(with tilt/swivel stand)
Tilt/Swivel Range
Power nput
Environmental
Conditions
Regulations
NOTE : Information in this ocument is subject to change without notice.
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 14
All manuals and user guides at all-guides.com
all-guides.com

15
Display Modes (Resolution) Horizontal Freq.(kHz) Vertical Freq.(Hz)
1 VGA 720 x 350 31.47 70
2 VGA 720 x 400 31.47 70
3 VGA 640 x 480 31.47 60
4 MAC 640 x 480 35.00 67
5 VESA 640 x 480 37.86 72
6 VESA 640 x 480 37.50 75
7 VESA 800 x 600 35.16 56
8 VESA 800 x 600 37.88 60
9 VESA 800 x 600 48.08 72
10 VESA 800 x 600 46.88 75
11 MAC 832 x 624 49.72 75
12 VESA 1024 x 768 48.36 60
13 VESA 1024 x 768 56.48 70
14 VESA 1024 x 768 60.02 75
15 VESA 1280 x 1024 63.98 60
16 VESA 1280 x 1024 79.98 75
VESA wall mounting
Connecte to another object (stan type
an wall-mounte type. This monitor
accepts a VESA-compliant mounting
interface pa .)
Kensington Security Slot -optional
Connecte to a locking cable that
can be purchase separately at
most computer stores.
Specifications –continued
Preset Modes (Resolution)
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 15
All manuals and user guides at all-guides.com

16
References
• BBS [phone]
NEC-Mitsubishi Electronics Display of America Remote Bulletin Boar System
is an electronic service accessible with your system an a mo em.
Communication parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no
parity, 8- ata bits, 1 stop bit
• Customer Service/ [phone]
Technical Support Fax: [phone]
• Electronic Channels:
Internet e-mail: [e-mail]
Internet ftp site: ftp.necmitsubishi.com
Worl Wi e Web: http://www.necmitsubishi.com
Pro uct Registration: http://www.necmitsubishi.com/pro uctregistration
European Operations: http://www.nec-mitsubishi.com
Win ows®95/98/Me/2000/XP INF File: http://support.necmitsubishi.com/software.htm
• FastFacts™ nformation [phone]
NFORMAT ON DESCR PT ON DOCUMENT #
Glossary Definition of terms relate 900203
to functions, features an
installation of the NEC monitor
More Information Names an a resses of 900204
other groups involve in
stan ar s an features of
the NEC monitor
Macintosh Connection Detaile information on 153006
connecting the NEC
monitor to a Macintosh
Healthy Work Environment Detaile information on 900108
setting up a healthy work
environment
• Literature & Sales nfo (800) NEC- NFO [[phone]]
• MultiSync Fulfillment [phone]
[For software & accessories]
• TeleSales [phone]
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 16
All manuals and user guides at all-guides.com

17
Limited Warranty
NEC-Mitsubishi Electronics Display of America, Inc.(hereinafter “NMD-A”) warrants this
Pro uct to be free from efects in material an workmanship an , subject to the con itions
set forth below, agrees to repair or replace (at NMD-A’s sole option) any part of the enclose
unit which proves efective for a perio of three (3) years from the ate of first consumer pur-
chase. Spare parts are warrante for ninety (90) ays. Replacement parts or unit may be new
or refurbishe an will meet specifications of the original parts or unit.
This warranty gives you specific legal rights an you may also have other rights, which vary
from state to state. This warranty is limite to the original purchaser of the Pro uct an is
not transferable. This warranty covers only NMD-A-supplie components. Service require as a
result of thir party components is not covere un er this warranty. In or er to be covere
un er this warranty, the Pro uct must have been purchase in the U.S.A. or Cana a by the
original purchaser. This warranty only covers Pro uct istribution in the U.S.A. or Cana a by
NMD-A No warranty service is provi e outsi e of the U.S.A. or Cana a. Proof of Purchase will
be require by NMD-A to substantiate ate of purchase. Such proof of purchase must be an
original bill of sale or receipt containing name an a ress of seller, purchaser, an the serial
number of the pro uct.
It shall be your obligation an expense to have the Pro uct shippe , freight prepai , or eliv-
ere to the authorize reseller from whom it was purchase or other facility authorize by
NMD-A to ren er the services provi e hereun er in either the original package or a similar
package affor ing an equal egree of protection. All Pro ucts returne to NMD-A for service
MUST have prior approval, which may be obtaine by calling 1-800-632-4662. The Pro uct shall
not have been previously altere , repaire , or service by anyone other than a service facility
authorize by NMD-A to ren er such service, the serial number of the pro uct shall not have
been altere or remove . In or er to be covere by this warranty the Pro uct shall not have
been subjecte to isplaying of fixe images for long perio s of time resulting in image per-
sistence (afterimage effects), acci ent, misuse or abuse or operate contrary to the instruc-
tions containe in the User’s Manual. Any such con itions will voi this warranty.
NMD-A SHALL NOT BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR OTHER
TYPES OF DAMAGES RESULTING FROM THE USE OF ANY NMD-A PRODUCT OTHER THAN THE LIABIL-
ITY STATED ABOVE. THESE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES OR THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
This Pro uct is warrante in accor ance with the terms of this limite warranty. Consumers
are cautione that Pro uct performance is affecte by system configuration, software, the
application, customer ata, an operator control of the system, among other factors. While
NMD-A Pro ucts are consi ere to be compatible with many systems, specific functional imple-
mentation by the customers of the Pro uct may vary. Therefore, suitability of a Pro uct for a
specific purpose or application must be etermine by consumer an is not warrante by
NMD-A.
For the name of your nearest authorize NEC-Mitsubishi Electronics Display of America service
facility, contact NEC-Mitsubishi Electronics Display of America at 1-800-632-4662.
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 17
All manuals and user guides at all-guides.com

18
Notes
LCD1855NX061102.qxd 6/11/02 10:43 AM Page 18
All manuals and user guides at all-guides.com