MD205MG-UK-10/07
NEC MD205MG
LCDs
•
Projectors
•
Plasmas
•
LCDs
•
Projectors
•
Plasmas
•
LCDs
•
Projectors
•
Plasmas
•
LCDs
•
Projectors
•
Plasmas
•
LCDs
All hardware and software names are brand names and/or registered trademarks of the respective manufacturers. All rights reserved. All specifications are subject to change without notice. October 2007
www.nec-display-solutions.com
NEC Display Solutions Europe GmbH
NEC MD205MG GREYSCALE DISPLAY SYSTEMS
Specifications of displays
Display technology
Screen diagonal
Active screen area
Native resolution
Landscape
Portrait
Pixel pitch
Contrast ratio
Peak luminance
Calibrated luminance
Viewing angle
Greyscale reproduction
Programmable gamma correction
Factory calibration
X-Ray film simulation
Signal inputs digital
Digital interface modes
Dimensions portrait mode
Dimensions landscape mode
Height adjustment range
Bezel width
Pivot / Tilt / Height-Adjust / Swivel
Weight including stand
VESA Mount capability
Power supply
Power consumption
Operating temperature
Humidity
MD205MG
SA-SuperFine Grayscale TFT glass
51 cm (20.1 inch)
31.9 x 39.9 cm
5 Megapixel
2560 x 2048
2048 x 2560
0.156 mm
600:1
850 cd/m2(native)
400 cd/m2white luminance
170° horizontal / 170° vertical (at 10:1 contrast ratio)
Max. 1024 (10-Bit) out of 3061 (11.5-Bit)
10-Bit (1024 grey tones)
Gamma correction according to DICOM GSDF with automatic adjustment
Clear Base
DVI-D
Packed Pixel
379.6 mm (W) x 512.7 mm (H) x 247.3 mm (D)
474.3 mm (W) x 465.3 mm (H) x 247.3 mm (D)
120 mm
28 mm
Yes / +30º,-5º / 120 mm / 340º
9.8 kg
Yes, 100 x 100 mm mounting
Internal, AC 100-240 Volts ~ 50/60 Hz nominal
65 Watts, normal operation (typical)
+0º ~ 35º C
0% ~ 80% (without condensation)
NEC MD Series Greyscale Display Systems comply with the DICOM Greyscale Standard
Display Function(GSDF) and with all European mandatory standards such as EN60601-1
for Safety, and EN60601-1-2 for Electromagnetic Compatibility. The CE Declaration is in
accordance with the European Directive 93/42/EC (Medical Device Directive). The NEC MD
Series Systems are registered as medical devices at DIMDI and succeeded pre-qualification
for the German X-ray ordinance acceptance tests according to DIN V6868-57.
www.medical.nec-display-solutions.com
The data in this publication is for illustration purposes only and does not necessarily represent standards or specifications which must be met by NEC Display Solutions. All hardware and software names
are brand names and/or registered trademarks of the respective owners. All rights reserved, in particular for the case of granting of patent or petty patent. Availability and technical specifications are subject
to change without notice. Issue: March 2007.
5 Megapixel
Single or Dual Display
10 Bit
PCI or PCI Express Bus
GammaCompMD
Display Model variety
Display controller board variety
Software
NEC MD SERIES GREYSCALE DISPLAY SYSTEM CONFIGURATIONS*
A typical NEC MD
Series Display
System configuration
1 Single or Dual head displays
2 Display Controller
Board
3 GammaCompMD
Quality Assurance Software
4Calibrator (optional)
3
4
2
1
