Nectre Fireplaces WONDERFIRE FFB Installation instructions

Installed primarily as a decorative appliance. Not certified as a Space Heater.
WONDERFIRE FFB (Fire Fan Box
INSTALLATION & OPERATING MANUAL
Nectre Wonderfire fire boxes are approved to be installed as a zero
clearance firebox and are designed to operate on Natural Gas.
Approval Number: AGA 4464 G
VERSION 1

2
WARRANTY INFORMATION
The benefits provided to you under the following warranty are in addition to any other rights and remedies available to
you under the law.
1. Warranty
If:
(a) during the first 10 years from the date of purchase (Firebox Warranty Period), there is a defect in the firebox of the
Gas Burner; or
(b) during the first 2 years from the date of purchase (Parts Warranty Period), there is a defect in the gas valves or
other parts of the Gas Burner,
due to improper workmanship or material, Glen Dimplex will replace or repair the Gas Burner without charge. Any
replacement product is warranted only for the time remaining on the original Firebox Warranty Period or the Parts
Warranty Period as relevant.
2. Registration
All in and out of warranty claims and service requests are to be emailed to: [email protected]
The email should include the following information:
• Proof of purchase—A copy of the customer’s invoice.
• Store details and contact person. (Please ensure A details are correct)
• All relevant customer details, if not on the proof of purchase
• Detailed report of the issue with pictures where possible showing any damage or technical issue.
3. Exclusions
Glen Dimplex is not obliged to replace or repair the Gas Burner under clause 1 if:
(a) it has been improperly stored, installed, connected, used, operated or repaired, or damaged, abused, tampered
with, altered (without our written approval), or not maintained in strict accordance with our installation and
operating instructions; or
(b) it has been installed in an outdoor setting.
4. Limit of Liability
The warranty provided under this warranty is limited to replacement or repair of the Gas Burner only, at our option.
To the extent permitted by law, Glen Dimplex excludes liability for consequential loss or any other loss or damage
caused to property or persons arising from any cause whatsoever, and damage arising from normal wear and tear.
5. Claiming under the Warranty
In order to claim under this warranty you must, within the Firebox Warranty Period or the Parts Warranty Period
(as relevant), contact Glen Dimplex, providing the original proof of purchase and the details below:
Supplier Name___________________________________________________________________________
Date Of Purchase / settlement of property if new home _________________
Model / Serial Number_______________________
This warranty does not cover the cost of claiming under the warranty or transporting the Real Flame Gas Burner to and
from the supplier.
Our goods come with guarantees that cannot be excluded under the Australian Consumer aw. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
If you would like to speak to someone about your Gas Burner or claiming under this warranty, please contact the
Service Warranty Desk on 1300 554 155.
Glen Dimplex Australia Pty td ACN 69 118 275 460
Head Office: 1340 Ferntree Gully Road, Scoresby 3179
Telephone: [phone] Facsimile: [phone]

3
INSTALLATION NOTICE
The installation of this appliance is only to be carried out by an authorised person in accordance
with the Manufacturer’s Instructions, local gas fitting regulations, AS/NZS5601.1-2013 installation
code for gas burning appliances and any other relevant statutory regulations.
In all cases the installation of this appliance shall meet the requirements as set out in
AS/NZS5601.1-2013
NOTE: A slight smell may be apparent for the first few hours of use. This is due to the heat resistant
paint curing. It is recommended to open windows in the room for the first lighting of the fire. In
some instances a slight discolouration may occur inside the firebox. This is a normal condition
and is not covered by warranty.
IMPORTANT SAFETY NOTICES
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
DO NOT SE OR STORE FLAMMABLE MATERIAL NEAR THE APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILST IT IS IN OPERATION.
CARE M ST BE TAKEN TO ENS RE THAT ANY RET RN AIR REGISTER OR EXHA ST SYSTEM
DOES NOT ADVERSELY AFFECT THE OPERATION OF THE APPLIANCE OR DRA GHT OF
CHIMNEY OR FL E.
DO NOT MODIFY THIS APPLIANCE.
THIS APPLIANCE IS DESIGNED TO OPERATE WITH L MINO S FLAMES. THIS MAY EXHIBIT
SLIGHT CARBON DEPOSITS.
Permanent ventilation of the room where the fire is to be situated is essential while fire is in operation.
The room must have a minimum cross sectional area of 40,000sq mm of effective ventilation.
It is recommended that you service your gas fire every 2 years.
VENTILATION REQUIREMENTS
THIS IS PRIMARILY A DECORATIVE APPLIANCE AND IS NOT CERTIFIED AS A SPACE HEATER.
WARNING
This firebox has a naked flame, care should be taken when it is operating if children or the infirm are in close
proximity. For protection of young children or the infirm, a secondary guard is required. A safety screen is
recommended if constant supervision is not possible. It is recommended that a secondary guard complying
with AS-NZS2286 be installed.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilitites, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.

4
CONTENTS
Contents .................................................................................................................4
User Instructions.....................................................................................................5
Installation Instructions ...........................................................................................6
Servicing Details .....................................................................................................8
Glen Dimplex contact information.........................................................................12

5
WONDERFIRE FFB (FIRE FAN BOX
Congratulations on your purchase of the Nectre Wonderfire.
This gas coal fire has been bench tested in the factory to ensure satisfactory operation.
Safety First!
• The appliance is designed to simulate a coal fire and as such the front grate, the entire front
and top vent are working surfaces which can become quite hot. Do not touch them. Always take
extra care with young children or the infirm.
• THE GUARD IS FITTED TO THIS APP IANCE TO REDUCE THE RISK OF FIRE OR INJURY
FROM BURNS AND NO PART OF IT SHOU D BE PERMANENT Y REMOVED.
• FOR THE PROTECTION OF YOUNG CHI DREN OR THE INFIRM, A SECONDARY GUARD
IS RECOMMENDED.
• DO NOT OPERATE WITH PANE S, COVERS, OR GUARDS REMOVED FROM THIS
APP IANCE.
• PRIMARI Y A DECORATIVE APP IANCE - NOT CERTIFIED AS A SPACE HEATER.
• Have the unit installed and serviced by a qualified person.
• Wash hands after handling coals and ensure children do not handle them as the colouring may
contain toxic dies.
Caring for Your Wonderfire FFB
Your Wonderfire has been designed for ease of use and is very easy to maintain. The Fire is a
sealed unit and there is no user serviceable components inside.
To clean:
• Metal surfaces; simply wipe over with a damp cloth. Do not use harsh cleaning agents or
solvents.
• Ceramic coals; ightly vacuum with a soft brush attachment.
• Pilot ight; check for lint and dust, vacuum as necessary.
• For units with a fan, check the air intake at the front of the Fire is free of lint and dust, clean as
necessary.
• Do not attempt to clean the unit whilst it is operating (including Pilot ight) or whilst it is hot.
• After a number of hours of use of the Fire, there may be a slight blackening of some parts of the
coals. This is normal and helps enhance the realistic coal fire look.
If Your Fire Needs Servicing
Your Fire is reliably designed and built to a fully tested design. Please be assured that if you have
any concerns, they will be resolved quickly and to your satisfaction.
If the Fire has been only recently installed and fails to operate, you should call the installer to solve
any problems. Check with the installer that installation has been carried out correctly, that the gas
lines have been bled and gas cocks are turned on.
If the problem is not related to the installation, please call your place of purchase and let them
know what model you have installed and a description of the problem. If necessary, they will refer
back to the manufacturer.
If after some use the appliance fails to operate, you can telephone us direct: 1300 554 155.

6
OPERATING INSTRUCTIONS - Customer
Please refer to the “Nectre Wonderfire” Operating, Installation and Servicing Instructions.
INSTALLATION INSTRUCTIONS
Preliminary
• This appliance must be installed in accordance with the AGA Gas Installation Code AS5601 /
AG601 Clauses 5.12.13.2 to 5.12.13.5 and appropriate Australian Standards to meet the zero
clearance rating.
• The Nectre Wonderfire Gas Fire is only to be used with the gas type specified for the unit.
• It is recommended that a secondary guard complying with AS 2286 be installed.
• As always, ensure that loose fabrics such as curtains and furniture cannot touch the appliance.
It is recommended that a fire guard be used with the appliance.
• The spacers on the sides and back of the box are to provide clearance to combustible
materials.
• Do not allow combustible materials to touch the box.
• There must be a minimum of 50mm gap between the gather and any combustible materials.
• The front opening of the box is 500mm wide and 570mm high.
• The overall dimensions of the box is 650mm wide, 300mm deep and 805mm high. (Dimensions
include zero clearance spacers and the gather but not the facia or guardette if fitted).
• Packaging and transit protection must be removed from the appliance prior to installation. This
includes pallet, plastic wrap, temporary labels and foam protection.
Fitting the unit
•If fitting to an existing fireplace, it must be at least 505mm wide, 275mm deep and 575mm
high to suit the Nectre fan forced convector box (with the zero clearance spacers removed).
• The chimney should also be swept and inspected to see if it is in sound condition.
• The chimney must be a minimum area of 22 000mm2 (e.g. 150x150mm if masonry or 150mm
diameter if round metal flue).
• A 150mm AGA approved Gas Cowl must be fitted.
TO THE INSTALLER
This appliance must only be installed by an authorized person in accordance with these
instructions and with the AGA gas installation code. Please ensure that your workmanship, like
ours, is of the highest quality so that our customer is fully satisfied with the installation and
operation of this Gas Fire. If you have any questions please call us: 1300 554 155.

7
INSTALLATION INSTRUCTIONS
Fitting the unit
•For a new fireplace, utilizing the Zero Clearance Box, the dimensions are 650mm wide,
295mm deep and 570mm high, plus the gather, which is the same width and depth but adds
205mm to the height of the unit.
• Place the Convector Box in the desired position.
• Check where timbers are located in the roof to ensure a clear path for the flue and maintain
25mm gap clearance.
• Fit a 150mm flue (active) together with an AGA approved gas cowl to the top of the flue. For
Zero Clearance add 200mm casing. Bend out four equidistant 25mm tags at the top of the
150mm flue to centre it in the 200mm flue. Flash the outer flue to the roof. The inner flue will be
free to move within outer flue to allow for thermal expansion and contraction.
• The room must have total fixed ventilation equal to the chimney / flue area.
• The gather should be sealed to the fan box using a high temp silicon or a high temp fire / flue
sealant.
Gas and electrical
• Gas connection is to a ½” BSP fitting connected to the gas regulator. This is located at the RHS
of the unit. 145mm up from the base and 80mm from the front.
• Note: Do not bring the gas supply down the active chimney.
• The 240v electrical connection for the fan is a cord with a standard 10A three pin plug, also on
the RHS near the gas connection, 50mm up from the base and 140mm from the front. The gas
control unit (remote control model only) is supplied by a battery pack containing 8 AA size
batteries, or a 240v ac to 12V dc Plug Pack.
Commissioning
• Once the burner is fitted and connected to the gas, test the unit’s operation.
• After 10 minutes operation from cold, test for fireplace spillage, i.e. all products of combustion
are entering the flue, by traversing the perimeter of the opening or canopy, using a smoke
generator (E.g. a smoking twist of paper or smoke match).

8
SERVICING / MAINTENANCE / FAULT FINDING DETAILS
Please refer to the “Nectre Wonderfire” Operating, Installation and Servicing Instructions.
WIRING DIAGRAM

9

10

11

G EN DIMP EX AUSTRA IA PTY TD
ABN 69 118 275 460
Head Office/Factory/Showroom
1340 Ferntree Gully Rd.
Scoresby Vic 3179
Ph: 1300 554 155 Fax: [phone]