Neltronics OBD-400 User manual

OBD-400 User manual
Please read this manual carefully before attempting installation and online activation.
Pictures are for indication and illustration purposes only

Packing list
Parts name quantity note
OBD dongle
1 ●
USB configuration
cable
1 ○
OBDII extension cable
1 ○
9-Pin adapter cable
1 ○
6-Pin adapter cable
1 ○
Note: ● Standard ○ Optional

Product Overview
industrial class devices for telematics，It Reads vehicle live data from ECU、GPS data and
G-sensor data, Then sends these data to server by 2G/3G/4G or BLE.
GPS LED GSM LED OBD LED USB interface OBD connector
1. Standard OBD Connector
Connect to the 16 Pin on-board Diagnostic Link Connector (DLC).
2. Mini USB interface
Connect to PC through USB configuration cable.
3. SIM Card slot and LED indicator light

Status Indicator
indicator status
OBD LED
Blinking (on 0.5s, off 0.5s)—trying to access OBD
ON—successful OBD communication
OFF—OBD is not available
GSM LED
Fast blinking (on 0.5s, off 0.5s) --network searching
Slow blinking (on 0.5s off 2.5s) --registered network
ON--logged into the server
OFF--GSM off
GPS LED
Blinking (on 1s, off 1s) -- GPS signal is good
ON—searching for GPS signal
OFF—GPS off

Installation Instruction
SIM card installation
Open waterproof rubber plug.
Insert the SIM card and press gently, a click will be heard upon successfully placing the SIM card
in its place, please follow the insert direction marked on the SIM card cover.
Device installation
First, find the OBD port at vehicle:
In general, the OBD port is located in the driver or passenger cabin, from the edge of dashboard
on driver side to the border of 300mm, It is easy to touch by sitting in the driver’s seat; the
preferred location is within the area from steering post to the vehicle centerline

Then device installation:
Before installing the device, please make sure device has been configured with necessary
parameters including network parameters.
Park the car and make sure engine is off, align the OBD connector of the device with the engine
diagnostic port and simply push in place, ensuring the device is secure.
If the OBD port cover cannot be closed back after device plugged in, please use OBD extension
cable and mount the device in proper place. Some heavy duties may need 9-pin or 6-pin
adapter cable.
For vehicle do not have an OBD port, please use power cable to connect vehicle battery.

Start engine the device starts OBD communication, various can be indicated by lights, or APP
log information.
Device Configuration
PC Tool
Get the USB driver(STM32 Virtual COM Port Driver(V1.3.1)) and SSCOM32 Tool from Distributor.
Install the USB driver and SSCOM32 Tool on your PC.
Connect device to PC through USB configuration cable, open the SSCOM32 Tool, and the device
will print log automatically. You also can send the command to device, then you can get the
response. The commands is same as SMS command.
Features
Location Inquiry (WHERE#)
Upon receiving location inquiry message from server or via SMS, device reports GPS data
immediately.
You will get the following response example:
Current Position!<01-08
17:36>http://maps.google.com/maps?q=N22.577156,E113.916748