Nemco Global Solutions GS1504-C User manual






























Cart Model
GS1504-C
GS1504-C 




2 
Table of Contents
SAFETYPRECAUTIONS...................................................................................................................................3 
INSTALLATIONINSTRUCTIONS...................................................................................................................4 
InspectionofShipment..........................................................................................................................................4 
Manual...........................................................................................................................................................................4 
ItemsIncludedwiththisUnit..............................................................................................................................4 
Setup–CartAssembly............................................................................................................................................4 
CAREANDCLEANING.......................................................................................................................................6 
MAINTENANCEINSTRUCTIONS...................................................................................................................6 
ORDERINGSPAREPARTS...............................................................................................................................7 
Cart‐PartsBreakdown..........................................................................................................................................8 
PRODUCTWARRANTY....................................................................................................................................9 
PRODUCTSERVICE...........................................................................................................................................9 
TERMS&CONDITIONS....................................................................................................................................9 






3
SAFETY PRECAUTIONS
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installin
g
, servicin
g
, or operatin
g
this equipment.
014_020416

WARNING
ALWAYS wear safety glasses when servicing this equipment.
010_010914

WARNING
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514

WARNING
Read and understand operator’s manual and all other safety instructions
before using this equipment. To order copies of the operator’s manual go to
www.nemcofoodequip.com or call 800.782.6761.
022_060215

WARNING
DO NOT allow direct contact of this equipment by the public when used in
food service locations. Only personnel trained and experienced in the
equipment operation may operate this equipment.
Carefull
y
read all instructions before operation.
012_010914

WARNING
This machine is NOT to be operated by minors.
007_010914







4 
INSTALLATION INSTRUCTIONS
Inspection of Shipment
Afterunpacking,checkthoroughlyforanydamagewhichmayhaveoccurredinshipment.
Purchasershouldmakeclaimdirectlytocarrierforanydamagestomerchandisethatoccurin
transit.Thewarrantydoesnotcoverdamagethatoccursintransit,ordamagecausedbyabuse,
orconsequentialdamageduetotheoperationofthismachine,sinceitisbeyondourcontrol
(referencewarrantyinbackofmanual).
Manual
Readandunderstandtheoperator’smanualandallothersafetyinstructionsbeforeusingthis
equipment.Toordercopiesoftheoperator’smanualcontactGlobalSolutions,301Meuse
ArgonneHicksville,OH43526,800.782.6761,orgotowww.nemcofoodequip.com.
Items Included with this Unit
 BaseCabinet
 HandleBarand2HandlebarBrackets
 2Wheels
 1Axle
 2ShortAxleSupports
 2LongLegSupports
 2LegSupportBrackets
 2AdjustableFeet(forlonglegs)
 HardwareKit(includesdoorknob)
Setup – Cart Assembly
Thiscartrequiresassembly(unitswithadoor,comewiththedoorandmagnetpre‐assembledto
thebase).Removeallpackagingandtape,thenfollowthestepsbelowforcartassembly.


Step1:Pre‐assembletheaxleandthe2short
axlesupports(FigureA).Toassemble,screw
a1/2‐13nutontoeachendoftheaxleuntilit
almostbottomsout.
Then,slideashortsupportontoeachendofthe
axleasshown.Fastenwitha1/2‐13nut(finger
tightenonlysosupportscanbeadjustedwhen
installingtothebase).
A
xleNut
A
xleNut
FigureA ‐Pre‐assembleAxleandSupports
Axle
Suppor
t

(short)




5 


LockNut
DoorKnob HandleAssembly
Step2:Attachaxleassemblytobaseonthe
sideoppositethehandlebar(FigureB).Use
2longbolts,4washers,and2locknutson
eachsupport(useawasheroneachend).
Onceassembled,tightentheaxlenuts
tosecure.
Step3:Assemblelonglegstobase.
Fasteneachlegusing2longbolts,
4washers,and2locknuts.
Step4:Positionthelegsupportbracketas
showninFigureB.Fastenbrackettoleg
usingalongbolt,washer,andlocknut.
Fastenbrackettocabinetusingashortbolt,
washer,andlocknut.
Step5:Installanadjustablefootontoeach
longleg.Ensurefootisfullyinsertedinlegas
showninFigureC.

Step6:Slideawheelontoeachendofthe
axleandfastenwithalocknut(FigureD).
Tightenthelocknutenoughtotakeup
clearance.DONOTovertighten.
Step7:Positioncartupright,andensureall
fastenersaresecure.
Step8:Assembleabracketoneachendof
thehandlebar.Fastenhandleassemblyto
cabinetusing4shortbolts,4washers,and
4locknuts(FigureE).
Step9:Cartsequippedwithadoor,install
thedoorknobontothecabinetdoorusing
the8‐32screw.
Step10:Carefullyinstallpopperbysettingit
inplaceonthecart,makesurethepopper
feetsetsecurelyintotheholesprovided.
Step11:Ifneeded,adjustcartfeettoensure
popperandcartarelevel.

LegSuppor
t

Bracke
t
FigureB –AttachAxleAssemblyandLegs
Leg Suppor
t

(long)

FigureC ‐Install
anAdjustableFoot
oneachleg.
FigureD
FigureE
A
ttachAxle
A
ssembly




6 
CARE AND CLEANING
Goodsanitationpracticedemandsthatallfoodpreparationequipmentbecleanedregularly(only
usenon‐toxic,foodgradecleaners).Acleanlooking,well‐keptmachineisoneofthebestwaysof
advertisingyourproduct.
Followthedirectionsbelowtocleanandsanitizeuniteachdayafteruse.
1. Wipeunitwithasoftcloth,dampenedwithhotwater.DONOTuseabrasivematerials
onthisunit.
2. Iffurthercleaningisneeded,useWatchdogConcessionEquipmentCleaner.

MAINTENANCE INSTRUCTIONS
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installin
g
, servicin
g
, or operatin
g
this equipment.
014_020416

WARNING
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514

CAUTION
THE FOLLOWING SECTIONS OF THIS MANUAL ARE INTENDED ONLY
FOR QUALIFIED SERVICE PERSONNEL WHO ARE FAMILIAR WITH
ELECTRICAL EQUIPMENT. THESE ARE NOT INTENDED FOR THE
OPERATOR.
027
_
010914





7
ORDERING SPARE PARTS
1. Identifytheneededpartbycheckingitagainstthephotos,illustrations,and/or
partslist.(Generalimagesmaybeusedinmanualforreferenceonly.)
2. Useonlyapprovedreplacementpartswhenservicingthisunit.
3. Whenordering,pleaseincludepartnumber,partname,andquantityneeded.
4. Pleaseincludeyourmodelnumber,serialnumber,anddateofmanufacture(located
onthemachinenameplate/dataplate)withyourorder.
5. Placeordersbyphoneoronline:

Phone: 800.782.6761
Fax: 419.542.6690

WebPage:www.nemcofoodequip.com





8 
Cart - Parts Breakdown


Item PartDescriptionPartNumber
GS1504‐C
1 HANDLEBARCARTGOLD 10423
2 BRACKETHANDLEBARGOLD(2required) 10422
 MANUAL 10435

12




9 
PRODUCT WARRANTY
PRODUCT SERVICE
TERMS & CONDITIONS


110195
3/29/18



10 



MODEL NUMBER CROSS REFERENCE
Global Solutions Gold Medal Products Co.
GS1504-C 2649-00-015


Approvals / Listings for Global Solutions Carts:
Our carts are manufactured to Global Solutions (a Nemco Food Equipment Company) specifications
by Gold Medal Products Co., USA.
