Neo-Pure RO-4300Rx User manual

1. Feed supply connecon
Flow restrictor
3. RO water out
1. The RO system is fed by connecng the angle
stop adapter to the cold supply line under the sink.
This connects directly to the manifold through the
le port marked IN
2. Water carrying the rejected contaminants exits the
manifold through the center port marked Drain. The
black tubing with the ow restrictor connects to this port.
The other end connects to the smaller barb connecon
on the airgap faucet.
2. Drain outlet to Air-gap connecon
3. RO water exits the manifold through
the right hand port marked ‘out’. This
1/4” line connects to the reducing tee
included with the installaon kit. The
run part of the tee (3/8”) connects to
the tank and the other side to the post
lter
1/4”
3/8”
Post Filter
1. Feed supply connecon
Flow restrictor
3. RO water out
1. The RO system is fed by connecng the angle
stop adapter to the cold supply line under the sink.
This connects directly to the manifold through the
le port marked IN
2. Water carrying the rejected contaminants exits the
manifold through the center port marked Drain. The
black tubing with the ow restrictor connects to this port.
The other end connects to the smaller barb connecon
on the airgap faucet.
2. Drain outlet to Air-gap connecon
3. RO water exits the manifold through
the right hand port marked ‘out’. This
1/4” line connects to the reducing tee
included with the installaon kit. The
run part of the tee (3/8”) connects to
the tank and the other side to the post
lter
1/4”
3/8”
Post Filter
1. Feed supply connecon
Flow restrictor
3. RO water out
1. The RO system is fed by connecng the angle
stop adapter to the cold supply line under the sink.
This connects directly to the manifold through the
le port marked IN
2. Water carrying the rejected contaminants exits the
manifold through the center port marked Drain. The
black tubing with the ow restrictor connects to this port.
The other end connects to the smaller barb connecon
on the airgap faucet.
2. Drain outlet to Air-gap connecon
3. RO water exits the manifold through
the right hand port marked ‘out’. This
1/4” line connects to the reducing tee
included with the installaon kit. The
run part of the tee (3/8”) connects to
the tank and the other side to the post
lter
1/4”
3/8”
Post Filter
Neo-Pure®RO-4300RX Pharmacy Trusted
Reverse Osmosis Drinking Water System
Quick Start
Guide
The RO system is fed by connecting the angle stop adapter to
the cold supply line under the sink. This connects directly
to the manifold through the left port marked IN.
RO water exits the manifold through the right
hand port marked ‘out’. This 1/4” line connects
to the reducing tee included with the installation
kit. The run part of the tee (3/8”) connects to
the tank and the other side to the post filter.
1. Feed Supply Connection
3. Ro Water Out
2. Drain Outlet To Air-Gap Connection
Water carrying the rejected contaminants exits the manifold
through the center port marked Drain. The black tubing
with the flow restrictor connects to this port. The other
end connects to the smaller barb connection on the
airgap faucet.
3
2
1

4. Tank and Post / Polish lter connecon
4. RO water exits the system from the Out port and con-
nects to the reducing tee. One leg of the tee connects to
the storage tank, the other leg connects to the post /
polish lter on the way to the faucet.
3/8”
To Faucet
Post / Polish Filter
Reducing Tee
3/8” 1/4” from RO
5. Faucet connecons.
5. Faucet connecons. 1/4” line from the Drain port of RO
system connects to the smaller barb at the base. The larger
barb connects to 3/8” line that runs to the drain saddle
aached to the drain line. Make sure that this run is as
straight as possible without loops or dips. Excess tubing here
could result in water coming out of air-gap hole on the base of
faucet body.
1/4” line from
RO Drain Port
4. Tank and Post / Polish lter connecon
4. RO water exits the system from the Out port and con-
nects to the reducing tee. One leg of the tee connects to
the storage tank, the other leg connects to the post /
polish lter on the way to the faucet.
3/8”
To Faucet
Post / Polish Filter
Reducing Tee
3/8” 1/4” from RO
5. Faucet connecons.
5. Faucet connecons. 1/4” line from the Drain port of RO
system connects to the smaller barb at the base. The larger
barb connects to 3/8” line that runs to the drain saddle
aached to the drain line. Make sure that this run is as
straight as possible without loops or dips. Excess tubing here
could result in water coming out of air-gap hole on the base of
faucet body.
1/4” line from
RO Drain Port
4
5. RO Faucet Connections
Faucet connections. 1/4” line from the Drain
port of RO system connects to the smaller barb
at the base. The larger barb connects to 3/8”
line that runs to the drain saddle attached to the
drain line. Make sure that this run is as straight as
possible without loops or dips. Excess tubing here
could result in water coming out of air-gap hole
on the base of faucet body.
4. Tank And Post / Polish Filter
Connection
RO water exits the system from the Out port and
connects to the reducing tee. One leg of the tee
connects to the storage tank, the other leg connects
to the post / polish filter on the way to the faucet.
Questions?
Ask our Service Representatives at:
864.284.1801 Mon.-Fri. 8:30a-7p,
Sat. 8:30a-4:30p EST.
Distributed By:
Manufacturer reserves the right to make changes without notice. ©2018 NeoLogic Solutions
2299 Ridge Rd., Greenville, SC
P: 888.859.1188 • F: 864.284.1819
NeoLogicSolutions.com • [email protected]
5