NESTLE Express Extra User manual

Cold Beverage Equipment Flushing
•The phone automatically scans the code or you may need to tap the screen or press the button normally used to
to take a photo.
•Tap on any one of the icons to view information and videos relating to the icon tapped.
•Open the camera on your smart phone. On some phones you may need a QR Code reader installed.
•Hold your device over the QR Code so that it's clearly visible within your smartphone's screen.
•A link will open up on the screen, tap on the link and your browser will take you to Nestle Professional where you
will have access to Cold Beverage Equipment Flushing & FAQs.
Customers Instrucons:
•The following steps are intended to becompleted by customer account personnel to flush and sanitize their
Nestle Professional Cold Beverage dispenser after any prolonged periods of inactivity.
BACKGROUND :Cold Beverage Equipment Flushing .
For video instructions on flushing your Nestle Professional Cold Beverage dispenser, scan theQR Code(s) next to the
platform image, using a smart
phone.
How To Scan QR Code:

Cold Beverage Equipment Flushing
Remove product from freezer.
Wash hands with soap and warm water for a minimum of 20 seconds.
Remove pump from the product container.Open door and insert pump into a station as demonstrated below.
•Replace pump back onto container.
•Clean the white or clear nozzles on the pumps, wipe down the interior of the refrigeration area and any human
contact points with a soft cloth and approved sanitizing solution.
Express E xtra and Express IV
•Close door and place a suitable container below the dispense nozzle and dispense water through the station for
a minimum of 2 minutes. Repeat this process for all stations (4 total).
Customers Instrucons:
To view a video on flushing the Express machine prior to
use, scan this code.

Cold Beverage Equipment Flushing
Remove product from freezer.
Wash hands with soap and warm water for a minimum of 20 seconds.
Remove pump from the product container.Open door and insert pump into a station as demonstrated below.
•Clean the white or clear nozzles on the pumps, wipe down the interior of the refrigeration area and any human
contact points with a soft cloth and approved sanitizing solution.
Express Touch
•Replace pump back onto container.
•Close door and place a suitable container below the dispense nozzle and dispense water through the station for
a minimum of 2 minutes. Repeat this process for all stations (4 total).
Customers Instrucons:

Cold Beverage Equipment Flushing
•Replace with new product and nozzles.
Wash hands with soap and warm water for a minimum of 20 seconds.
•Disconnect product from dispenser.
•Wipe down the area and any human contact points with a soft cloth and sanitizing solution.
Wash hands with soap and warm water for a minimum of 20 seconds.
•Place a container under the dispensing area.
Initiate arinse cycle by pressing the down arrow in the lower left corner of the display and the select bothsides.
•Continue the rinse process until 1 gallon of water has been dispensed through the machine.
•Wipe down the interior oftherefrigerationarea and any human contact points with a soft cloth and sanitizing
solution.
•Flush 1 gallon of water through each side of the dispenser.
•Replace with new product.
C ustomers Instructions :
TCD2
C ustomers Instructions :
CoolPro
To view a video on flushing the CoolPro machine prior to use, scan this code.

BIB/Wunderbar Gun Systems
selection 1 for a minimum of 2 minutes. Repeat this process for selections 2, 3 and 4.
Wash hands with soap and warm water for a minimum of 20 seconds.
Dispense 1 gallon of water only (approximately 2½ minutes) through the dispensing gun.
•Close cabinet door. Place a suitable container below selection 1 dispense nozzle and dispense water through
Cold Beverage Equipment Flushing
https://www.homedepot.com/p/PurTest-Bacteria-Test-Kit-700/202708273?mtc=Shopping-B-F_D26P-B-D26P-
26_9_WATER_TREATMENTS-NA-NA-Feed-PLA-NA-NA-WATER_TREATMENTS&cm_mmc=Shopping-B-
F_D26P-B-D26P-26_9_WATER_TREATMENTS-NA-NA-Feed-PLA-NA-NA-WATER_TREATMENTS-
71700000034388186-58700003952496738-
92700032054947123&msclkid=7e5f1868e8d81d07ca5746d67e6de658&gclid=CIi77uH6tekCFcL4DQodBr4DCA&
gclsrc=ds
•If you would like to test the quality of your water, the following kit from PurTest is available from Home Depot and
other outlets:
•Account should confirm their potable water source is free of microbial contamination. Test results should be zero
microbial contamination.
Customers Instrucons:
Customers Instructions For Testing Water:

If you have any quesons, please do not hesitate to contact customer service at 1-800-367-5813.