Net World Sports Forza User manual

Anchor the goal using the provided U-pegs ensuring posts are upright and
the crossbar is level. The U-pegs fit around the base and push into the
ground to keep the goal steady.
Starting with the top corners, fit the net by wrapping it around the posts and
clipping to the inside using the net clips provided. Attach clips equally along
the length of the net.
9
10
Place the net over the frame. The Net World Sports label indicates the top of
the net, ensure this is at the top of the crossbar. Align the side seams with the
arching tension bars so that the net sits comfortably over the goal.
8
8975
9026
9057
9101
x2
x2
x4
x4
9224
9217
9255
LOCKING
CLIPS
x2
x2
x2
x1 PCK
PART NO
QTY
U-PEGS
NET
CLIPS
NET
x2
x1 PCK
x1
9200
x4
i
Always Inspect goal post and net for defects before use and repair damaged parts in accordance with BS
8461:2005 code of practice.
Do not use goal with faulty parts.
The goal must always be secured to the ground. Weights to be used on hard surfaces, ground anchors
on grass.
Never climb on the net or goal frame. The goal must never be used without the net fitted.
Please adhere to safety instructions at all times.
www.youtube.com/networldsports
WATCH THE VIDEOS
Learn how to assemble your goal and
take your game to the next level.
Additional Information
When the goal is not being used dismantle and store under cover.
This goal conforms with BS8462:2005.
Not suitable for children under 3 years.
It is recommended that the goal is assembled by an adult.
Warranty excludes net.
Please see forzagoal.com/forza-goal-instructions for more details.
@NetWorldSports
www.networldsports.com // 1-866-861-9095 // [e-mail]
www.networldsports.co.uk // [phone] // [e-mail]
5 x 4 MATCH GOAL
9217
9217
9200 9057
9057
NET CLIP
9200
9057 9057
9026
9026
9200
9200
9255
9255
9224
9224
9101
9101
9101
9101

Lay out all components and ensure that they match the parts list.
1
Insert all Locking Clips into all the connectors 9200, 9255 & 9217.
2
Assemble the base, attaching parts 9026 & 9057 to the connectors.
3
4
Fit the crossbar (step 4) to the base (step 3), affixing the 2 x
8975to the 2 x 9255.
Assemble both arching tension bars, connecting 2 x 9101 to 1 x 9224.
5
6
Lay the goal on its front. Fit the tension bars to the uprights, before returning
the goal to the correct position. Secure the tension bars into the base. The
tension bars will flex allowing them to be put into place.
7
Assemble the crossbar and the upright section, attaching
8975 & 9057 to connectors.
9200
9255
9255
90579057 9217
9026
9026
9200
9200 9057 9217 9057 9200
8975 8975
9217
9255
LOCKING
CLIPS
9200
9101 9101
9224