Net1 Vertical Backboard & Goal User manual

r c r
GM Operations Centre,
Trent Lane, Colwick, Nottingham,
NG2 4DS United Kingdom
NET1 is a registered trade mark of Unicorn Products Ltd. © 2018
C9952
N123205

B
D
C
A
F
E
G
H
X

5
2) Place the bracket (A) against the wall in the desired position. Check bracket A is square with a spirit level.
Mark the four hole positions through the bracket with a marker pen.
four expanding bolts (B).
from part (B).

four expanding bolts (B).
C
B
X
A
C
B
x
C
of part (A).
two B
Cfrom part (B).

D
D
E
E
D
two nuts and bolts (D).
two nuts and bolts from part (D).
E

Step 4: Securing the rim arm supports
1) Secure the arms (E) to the wall bracket (A) by fixing nuts and bolt (F) through the holes as indicated below.
E
EF
F
F
A
A
F F F F
Step 2
E E

WARNING!
To ensure your safety, do not attempt to assemble the basketball system set without reading and
following all instructions carefully.
Identify and check the parts using the parts list.
HANGING FROM THE RIM WILL DAMAGE THE UNIT, VOID THE WARRANTY AND RESULT IN PERSONAL
INJURY. THE PRODUCT IS NOT DESIGNED FOR THIS TYPE OF USE.
REQUIRES ASSEMBLY BY AN ADULT.
Step 5: Attaching the net
1) Attach the net (G) to the net hooks (H) of the goal.
G
H