NetComm Wireless NP511 User manual

500Mbps Powerline Adapters
with AC Pass-through
NP511
USER GUIDE

2
NP511 –500Mbps Powerline Adapters User Guide
www.netcommwireless.com
v1.1
Copyright
Copyright© 2015 NetComm Wireless Limited. All rights reserved.
The information contained herein is proprietary to NetComm Wireless. No part of this document may be translated, transcribed,
reproduced, in any form, or by any means without prior written consent of NetComm Wireless.
Please note: This document is subject to change without notice.
Save Our Environment
When this equipment has reached the end of its useful life, it must be taken to a recycling centre and processed separately from
domestic waste.
The cardboard box, the plastic contained in the packaging, and the parts that make up this device can be recycled in accordance
with regionally established regulations. Never dispose of this electronic equipment along with your household waste. You may be
subject to penalties or sanctions under the law. Instead, ask for disposal instructions from your municipal government.
Please be responsible and protect our environment.
This guide covers the following products:
NetComm Wireless NP511 500Mbps Powerline Adapters with AC Pass-through
DOCUMENT VERSION
DATE
1.0 - Initial document release
August 2014
1.1 –Re-ordered LED descriptions to match order on unit.
24 September 2015
Table 1 - Document Revision History

www.netcommwireless.com
NP511 –500Mbps Powerline Adapters User Guide
3
v1.1
Table of contents
Table of contents...........................................................................................................................................................................3
About the product..........................................................................................................................................................................4
How does it work?.........................................................................................................................................................................................4
Direct connection ..........................................................................................................................................................................................4
AC pass-through ...........................................................................................................................................................................................4
Package contents..........................................................................................................................................................................................5
Interfaces and Indicators................................................................................................................................................................................5
Interfaces ..............................................................................................................................................................................................6
LED indicators .......................................................................................................................................................................................6
Creating a Powerline network.................................................................................................................................................................7
Resetting the private network password .................................................................................................................................................8
Joining an existing Powerline network.....................................................................................................................................................8
Determining connection rate ..........................................................................................................................................................................9
Power saving mode .......................................................................................................................................................................................9
Getting started.............................................................................................................................................................................10
Plan your network........................................................................................................................................................................................ 10
Legal & Regulatory Information...................................................................................................................................................12
Product Warranty ........................................................................................................................................................................................ 12
Limitations of Warranty ................................................................................................................................................................................12

4
NP511 –500Mbps Powerline Adapters User Guide
www.netcommwireless.com
v1.1
About the product
Powerline adapters are ready to use out of the box and do not require the installation of driver software to work. They can be
connected to computers, routers, gaming consoles, hubs, IPTV set-top boxes, and other Ethernet devices regardless of operating
system.
How does it work?
Powerline adapters utilise the existing electrical wiring in the house as a path to create a secured network of computers and
Ethernet devices. With a maximum data rate of up to 500 Mbps, Powerline adapters can reliably handle high requirement
applications like broadband Internet, high definition video streaming, and Voice over IP.
Powerline adapters convert digital signals to a complex analog signal that traverses along the electrical wires. When receiving the
analog signal, the Powerline adapters convert the analog signal back to digital. To make the signal secure, a 128-bit AES encryption
is applied.
A Powerline device can only communicate with other Powerline devices that use the same private network password. The private
network password can be changed manually using the Powerline adapter utility software on a computer with a Windows operating
system. When you use the software, you have to manually type the private network password for the device. Another way to
change the private network password is to use the Security button. The Security button automatically creates an encrypted private
network password. It can also be used to reset the private network password or to add a device into an existing Powerline network.
Note: Powerline adapters are pre-configured to use a common private network password unique for that pair and are ready
to use out of the box.
When a Powerline adapter communicates with another device, the Powerline Activity LED colour indicates the connection speed:
red indicates a good connection; amber indicates a better connection; and green indicates the best possible connection speed.
Direct connection
For best performance, connect Powerline adapters directly to a wall outlet. Avoid connecting them to a power strip where other
electrical devices are connected. Other devices create electrical noise that may affect the performance of Powerline adapters.
AC pass-through
Both of the Powerline adapters in the kit comes with built in AC pass-through. With this unit you are conveniently able to use the
same power point to plug in other electrical appliances. All you have to do is connect the electrical appliance into the built-in pass-
through socket and it will have power as if it was connected directly into the wall. This eliminates the need to connect your
Powerline adapter to a power board and improves your networking performance.

www.netcommwireless.com
NP511 –500Mbps Powerline Adapters User Guide
5
v1.1
Package contents
The package contains the following items:
2 x Powerline adapters
2 x Ethernet cables
Quick start guide
If any of these items are missing or damaged, please contact NetComm Wireless Support immediately by visiting the NetComm
Wireless Support website at: http://support.netcommwireless.com
Interfaces and Indicators
1
2
3
4
5
6

6
NP511 –500Mbps Powerline Adapters User Guide
www.netcommwireless.com
v1.1
Interfaces
#
LABEL
DESCRIPTION/FUNCTION
1
Reset button
Use a paperclip to press this button for no more than 3 seconds to reset the unit to the factory default settings
2
Security button
Press the security button for 10 seconds to reset the private network password. Press the security button for no more
than 3 seconds to begin pairing.
3
Ethernet port
Accepts either crossover or straight-through Ethernet cable.
LED indicators
#
LABEL
STATUS
DESCRIPTION/FUNCTION
4
Power
Off
No power.
On
When Security button is pressed for 10 seconds, this LED will turn OFF and turn ON once to confirm
the private network name reset.
When Security button is pressed for no more than 3 seconds, this LED will blink to confirm the
button press.
Blinks slowly when the adapter is in power saving mode.
5
Ethernet Activity
Off
An Ethernet device is not connected.
On
When the Security button is pressed for 10 seconds, this LED will turn OFF to confirm the private
network name reset.
This LED remains steady when the device is part of a Powerline adapter network.
The LED colours represent the connection rate within the Powerline adapter network whether it is
good (red), better (amber), or best (green).
6
Powerline activity
Off
Device is not connected to a Powerline adapter network.
On
When Security button is pressed for 10 seconds, this LED will turn OFF to confirm the private
network name reset.
This LED remains steady when the device is part of a Powerline adapter network.
The LED colours represent the connection rate within the Powerline adapter network whether it is
good (red), better (amber), or best (green).

www.netcommwireless.com
NP511 –500Mbps Powerline Adapters User Guide
7
v1.1
How to use the Security button
The Powerline Adapters that you have received are ready for use straight out of the box. They require no initial set-up or
configuration. All you need to do is connect them as detailed in the Quick start guide. The following instructions about using the
Security button to configure your network are only applicable if you want to change the default private network password or add
more adapters on the same Powerline network.
The Security button provides a convenient way of creating your Powerline network without the need to use application software
from a computer. The button has three main functions which include:
Creating a Powerline network
Resetting the private network password
Joining an existing Powerline network
Creating a Powerline network
To create a Powerline network, you need at least two Powerline devices using random private network passwords. When you press
the Security button on both devices, a common private network password is automatically generated to enable them to
communicate with each other.
Note: New Powerline adapters can already communicate with each other out of the box. However, if you intend to create a
new private network password using the Security button for both devices, you must reset their private network passwords
to a random key before proceeding.
To create a Powerline network using the Security button:
1. Plug your Powerline adapters side-by-side where you can easily observe the LED behaviour. Upon connection, the LEDs
will blink simultaneously and then the Power LED remains on steadily.
Adapter X Adapter Y
2. On Adapter X, press the Security button for two seconds. After you release the button, the Power LED blinks. If the Power
LED did not blink, press the Security button again for two seconds.
3. On Adapter Y, press the Security button for two seconds. After you release the button, the Power LED blinks. If the Power
LED did not blink, press the Security button again for two seconds. The Security button on Adapter Y must be pressed
within two minutes of pressing the Security button on Adapter X. The LEDs on both devices switch off and on twice to
signify that they are searching for another device with which to pair.
4. To confirm the connection was established, check the LEDs. If a connection is made successfully the Power LEDs and the
Powerline Activity LEDs on both adapters are on. If the Powerline Activity LED on either Adapter X or Adapter Y is off, this
means the pairing was not successful. In this case, please repeat the process as outlined from step 1.
5. Unplug the Powerline adapters and then connect them to your Ethernet devices using the Ethernet cables from the product
package. After connecting the Ethernet cable, plug the adapters directly to a wall outlet in the room to which you would like
to provide network access.
Note: Powerline adapters work best when connected directly to a wall socket. Avoid plugging them into a power strip or
power extension. Other electrical devices in the power strip produce electrical noise that may affect the performance of the
adapter.

8
NP511 –500Mbps Powerline Adapters User Guide
www.netcommwireless.com
v1.1
Resetting the private network password
The Security button allows you to reset the Powerline adapter’s private network password to a random key. When a Powerline
adapter is reset to a random key, it will not be able to communicate with any other device.
Note: The Security button has multiple functions depending on the length of time it is depressed. Resetting the private
network password is not the same as restoring factory default settings.
To reset the Private Network Password using the Security button:
1. On one Powerline adapter, press and hold the Security button down for 10 seconds, wait for the Power LED and Ethernet
LED to turn off, and then release. The Powerline Activity LEDs of both units turn OFF.
2. On the second adapter, press the Security button for 2 seconds and then press the Simple Connect button on the first
Powerline adapter to pair the devices. The Power LED blinks to indicate that the button is pressed.
Joining an existing Powerline network
The Security button enables a new device to join an existing network by copying the private network password of the existing
network to the new Powerline adapter.
To join an existing secured Powerline network using the Security button:
1. Plug Powerline adapter Z beside one of your existing Powerline adapter devices. Make sure you can observe the LED
behaviour. Upon connection, Powerline adapter Z’s LEDs blink simultaneously and then the Power LED remains on
steadily. If there is an Ethernet link, the Ethernet LED is on.
2. On Powerline adapter Z, press the Security button for 10 seconds. When you release the button, the Power LED and
Ethernet LED will turn off and on again.
3. On the existing Powerline device, press the Security button for 1-3 seconds. When you release the button, the Power LED
blinks continuously. If the Power LED did not blink, press the Simple Connect button again for 1-3 seconds.
4. Within the next 2 minutes, press the Security button on Powerline adapter Z again for 1-3 seconds.
5. Confirm that the connection was established successfully. To do this, check that the Power LEDs and Powerline Activity
LEDs on all Powerline adapters are on. If the Powerline Activity LED on adapter Z is off, the pairing was not successful and
you must repeat the process.
6. Unplug Powerline adapter Z and then connect it to your Ethernet device using the Ethernet cables from the product
package. After connecting the Ethernet cable, plug adapter Z directly to a wall outlet where you intend to use it.

www.netcommwireless.com
NP511 –500Mbps Powerline Adapters User Guide
9
v1.1
Determining connection rate
Each colour of the Powerline Activity LED represents a connection rating. The connection rating can only be calculated when the
device is part of an existing network. The exact connection rate value can also be viewed using Powerline Utility.
Good (Red) –Connection rate is less than 30 Mbps
Better (Amber) –Connection rate is between 30 to 80 Mbps
Best (Green) –Connection rate is more than 80 Mbps
Power saving mode
After 15 minutes without Ethernet activity, the Power LED blinks slowly indicating that the adapter is in power saving mode.

10
NP511 –500Mbps Powerline Adapters User Guide
www.netcommwireless.com
v1.1
Getting started
Plan your network
Here are ideas on how you can plan your Powerline network.
Local network
Share a high-speed Internet connection with any computer, wherever it is in the house.
Gaming network
Connect your gaming console to the Internet and compete with other online players.

www.netcommwireless.com
NP511 –500Mbps Powerline Adapters User Guide
11
v1.1
Entertainment network
Experience IPTV streaming to your home entertainment system.
Media network
Converge all your IP devices onto a single network to enjoy seamless integration.

12
NP511 –500Mbps Powerline Adapters User Guide
www.netcommwireless.com
v1.1
Legal & Regulatory
Information
This manual is copyright. Apart from any fair dealing for the purposes of private study, research, criticism or review, as permitted
under the Copyright Act, no part may be reproduced, stored in a retrieval system or transmitted in any form, by any means, be it
electronic, mechanical, recording or otherwise, without the prior written permission of NetComm Limited. NetComm Limited
accepts no liability or responsibility, for consequences arising from the use of this product. NetComm Limited reserves the right to
change the specifications and operating details of this product without notice. NetComm is a registered trademark of NetComm
Limited. All other trademarks are acknowledged the property of their respective owners.
Product Warranty
The warranty is granted on the following conditions:
1. This warranty extends to the original purchaser (you) and is not transferable;
2. This warranty shall not apply to software programs, batteries, power supplies, cables or other accessories supplied in or
with the product;
3. The customer complies with all of the terms of any relevant agreement with NetComm and any other reasonable
requirements of NetComm including producing such evidence of purchase as NetComm may require;
4. The cost of transporting product to and from NetComm’s nominated premises is your responsibility;- and,
5. NetComm does not have any liability or responsibility under this warranty where any cost, loss, injury or damage of any
kind, whether direct, indirect, consequential, incidental or otherwise arises out of events beyond NetComm’s reasonable
control. This includes but is not limited to: acts of God, war, riot, embargoes, acts of civil or military authorities, fire, floods,
electricity outages, lightning, power surges, or shortages of materials or labour.
6. The customer is responsible for the security of their computer and network at all times. Security features may be disabled
within the factory default settings. NetComm recommends that you enable these features to enhance your security.
The warranty is automatically voided if:
1. You, or someone else, use the product, or attempts to use it, other than as specified by NetComm;-
2. The fault or defect in your product is the result of a voltage surge subjected to the product either by the way of power
supply or communication line, whether caused by thunderstorm activity or any other cause(s);
3. The fault is the result of accidental damage or damage in transit, including but not limited to liquid spillage;
4. Your product has been used for any purposes other than that for which it is sold, or in any way other than in strict
accordance with the user manual supplied;
5. Your product has been repaired or modified or attempted to be repaired or modified, other than by a qualified person at a
service centre authorised by NetComm; and, 6. The serial number has been defaced or altered in any way or if the serial
number plate has been removed.
Limitations of Warranty
The Trade Practices Act 1974 and corresponding State and Territory Fair Trading Acts or legalisation of another Government (“the
relevant acts”) in certain circumstances imply mandatory conditions and warranties which cannot be excluded. This warranty is in
addition to and not in replacement for such conditions and warranties.
To the extent permitted by the Relevant Acts, in relation to your product and any other materials provided with the product (“the
Goods”) the liability of NetComm under the Relevant Acts is limited at the option of NetComm to:

www.netcommwireless.com
NP511 –500Mbps Powerline Adapters User Guide
13
v1.1
Replacement of the Goods; or
Repair of the Goods; or
Payment of the cost of replacing the Goods; or
Payment of the cost of having the Goods repaired.
All NetComm ACN 002 490 486 products have a standard 12 months warranty from date of purchase. However some products
have an extended warranty option (refer to packaging). To be eligible for the extended warranty you must supply the requested
warranty information to NetComm within 30 days of the original purchase by registering on-line via the NetComm web site at
http://www.netcommwireless.com