NETGEAR Arlo Quadpod Mount User manual

Arlo Quadpod Mount
Quick Start Guide

32
What’s Included
Quadpod mount Window decal
Washer
Security screw
Mount Your Arlo Camera
1. Fasten your Arlo Pro or
Arlo Go camera to the
quadpod mount.
If you are using a skin on
the camera, you do not
need the washer. Use
the screw to secure the
camera to the mount.

54
For a camera without a skin, use the washer
and the security screw to fasten your Arlo
Pro or Arlo Go camera to the quadpod mount.
2. Bend the legs until the mount is in a stable
position that supports the camera.
For more information about positioning your
camera, see the user manual, which is available
online at arlo.com/support.

6
You’re Done!
To view useful tutorial videos, find troubleshooting
tips, or get support, visit arlo.com/support.

©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are
trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used
for reference purposes only.
Si ce produit est vendu au Canada, vous pouvez accéder à ce
document en français canadien à arlo.com/docs.
(If this product is sold in Canada, you can access this document in
Canadian French at arlo.com/docs.)
For the current EU Declaration of Conformity, visit
http://kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
350 East Plumeria Drive
San Jose, CA 95134, USA
October 2017
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland