Motomaster 009-0078-8 User manual

headline bars
tabs
continuation tabs
notes
warnings
model no. 009-0078-8
IMPORTANT:
Please read this manual carefully before using this product and save it for
reference.
INSTRUCTION
MANUAL
WALL-MOUNTING TIRE RACK

headline bars tabs continuation tabs notes warnings
headline bars
tabs
continuation tabs
notes
warnings
model no. 009-0078-8 | contact us 1-888-942-6686
2
IF ANY PARTS ARE MISSING OR DAMAGED, OR IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR TOLL-FREE HELPLINE AT 1-888-942-6686.
Read and understand this instruction manual thoroughly before using the product. It contains important
information for your safety as well as operating and maintenance advice.
Keep this instruction manual for future use. Should this product be passed on to a third party, this
instruction manual must be included.
This MotoMaster product carries a one (1) year warranty against defects in workmanship and materials. At
its discretion, MotoMaster Canada agrees to have any defective part(s) repaired or replaced free of charge,
within the stated warranty period, when returned by the original purchaser with proof of purchase. This
product is not guaranteed against wear or breakage due to misuse and/or abuse.
WARRANTY INFORMATION
MADE IN CHINA
IMPORTED BY MOTOMASTER CANADA
TORONTO, CANADA M4S 2B8

headline bars tabs continuation tabs notes warnings
headline bars
tabs
continuation tabs
notes
warnings
headline bars
tabs
continuation tabs
notes
warnings
3
TABLE OF CONTENTS
TABLE OF CONTENTS
SAFETY INFORMATION 4
INTRODUCTION 4
SAFETY INFORMATION 4
PERSONAL SAFETY INSTRUCTIONS 4
TECHNICAL SPECIFICATIONS 4
PARTS LIST 5
ASSEMBLY 6
MAINTENANCE 8
headline bars
tabs
continuation tabs
notes
warnings
IMPORTANT:
This manual contains important safety and operating instructions.
Read all instructions and follow them while using the product.

headline bars tabs continuation tabs notes warnings
headline bars
tabs
continuation tabs
notes
warnings
model no. 009-0078-8 | contact us 1-888-942-6686
4
SAFETY INFORMATION
INTRODUCTION
The MotoMaster®Wall-mounting Tire Rack is
perfect for storing seasonal tires. Easily holds up
to 4 vehicle tires. Strong and durable steel tubing.
Simple and quick installation by attaching two
steel frame directly to the wall studs with 48”
(121.9 cm) distance centre to centre. Maximum
capacity of the tire rack is 375 lb (170 kg) evenly
distributed.
SAFETY INFORMATION
• Do not modify the tire rack and do not use
this product for purposes that it was not
designed for.
• Never exceed the maximum load capacity of
375 lb (170 kg). Centre the load on the rack
to equalize torsional stress. The tire rack is
designed to hold 4 vehicle tires.
• Be aware of the danger of “dynamic loading”.
This situation arises when a load is dropped
onto the tire rack, resulting in a short term
excessive load. Dynamic loading can result
in damage and failure of the tire rack and
personal injury to the person loading the tire
rack.
• Keep children and spectators away when
loading and unloading the tire rack.
• Only set up the tire rack against a wall
that has vertical studs and is capable of
supporting the weight of this product and its
maximum load capacity of 375 lb (170 kg).
Locate this product in a safe area, away from
all flammable materials.
• This product requires some assembly and
set-up. If you are not experienced or capable
of doing this type of assembly and set-up
work, the tire rack should be assembled and
set-up by a qualified service technician.
• Periodically check that all hardware is tight
and secure. If any damage to the structure of
the tire rack is noted, the product should be
replaced.
• Work safely. When drilling holes to mount this
product make sure that there are no hidden
utility lines or pipes in the drilling path.
• Wear ANSI-approved safety goggles and
heavy-duty work gloves during installation
and use.
• Always drill pilot holes and make sure the
pilot holes are longer than the lag screws
provided at least, before driving lag screws
into the wood wall stud.
PERSONAL SAFETY INSTRUCTIONS
• It is the owner’s and/or operator’s
responsibility to read and understand all
WARNINGS and operating instructions
contained on the product labels and within
the instruction manual prior to operation of
this product.
• It is also the owner’s and/or operator’s
responsibility to periodically inspect and
maintain this product and its labels. Read the
product labels and instruction manual prior to
operation of this product.
TECHNICAL SPECIFICATIONS
Model 009-0078-8
Maximum Capacity 375 lb (170 kg)
evenly distributed.
Mounting Width
Required 48” (121.9 cm)
Tire Capacity Holds up to 4 vehicle tires
headline bars tabs continuation tabs notes warnings
TECHNICAL SPECIFICATIONS

headline bars tabs continuation tabs notes warnings
headline bars
tabs
continuation tabs
notes
warnings
headline bars
tabs
continuation tabs
notes
warnings
5
PARTS LIST AND PARTS DIAGRAM
PART NO. DESCRIPTION QTY.
1 Left Frame 1
2 Right Frame 1
3Round Tube 6
4Tube Adaptor 3
TOOLS REQUIRED
Power Drill, 3/16” Drill Bit (4.8 mm), 13 mm and 17 mm Wrenches, Stud Finder, Level, Pencil,
Safety Goggles, Tape Measure, Ladder.
PARTS LIST AND PARTS DIAGRAM
PART NO. DESCRIPTION QTY.
5 Lag Screw M8x60 8
6 Washer 8 8
7 Hex Bolt M10x55 6
8 Washer 10 6
1
2
4
3
3
7
8
65

headline bars
tabs
continuation tabs
notes
warnings
headline bars tabs continuation tabs notes warnings
headline bars
tabs
continuation tabs
notes
warnings
model no. 009-0078-8 | contact us 1-888-942-6686
6
ASSEMBLY
Plan for the proper location of the tire
rack. The product must be attached to a
wall surface with vertical studs, and the
supports will be positioned 48” (121.9
cm) (centre to centre) apart. Use a stud
finder (not included) to assist in locating
studs. Use a pencil to mark the top
mounting hole centres. Make sure holes
are level. Pre-drill the marked holes
using a 3/16” (4.8 mm) drill bit.
Note: the tire rack must be mounted
directly into the wall studs; do not use
wall anchors to mount to sheetrock.
Note: make sure the pilot holes that
pre-drilled are long enough, at least
longer than the lag screws provided.
Slide Washer (6) onto the Lag Screw
(5); insert Lag Screw (5) through the top
mounting hole of each Frame to hold
in place using a 13mm wrench (not
included). Do not tighten Lag Screw (5)
completely at this time.
Note: Identify Left Frame or Right Frame
using the marking sticker on each,
make sure the Mounting Plates are to
the inside.
Note: Don’t use an impact driver.
Make sure Left Frame (1) and Right
Frame (2) are vertically level using a
level. Use the remaining 3 mounting
holes in each as template, and drill the
holes on the wall studs.
1
3
2
ASSEMBLY
x
STEP 1
x
48” (centre to centre)
STEP 2
1
65
2
65
Mounting
Plate
STEP 3
1
2

headline bars tabs continuation tabs notes warnings
headline bars
tabs
continuation tabs
notes
warnings
7
headline bars
tabs
continuation tabs
notes
warnings
Insert three more Lag Screws (5) and
Washers (6) in each frame to secure in
place. Do not tighten Lag Screws (5)
completely at this time.
Note: Don’t use an impact driver.
Connect each two Round Tubes (3)
using the Tube Adaptor (4). Place one
Round Tube Assembly at the back of
the rack at the desired height to protect
the wall from tire rub. Attach both ends
to Left Frame (1) and Right Frame (2)
using the Hex Bolts (6) and Washers (7).
Attach the remaining two Round Tube
Assemblies to Left Frame (1) and Right
Frame (2) at the desired positions, so
the tires can sit deeply enough to stand
upright securely, using the Hex Bolts (6)
and Washers (7).
Now fully tighten Lag Screws (5) into
the wall studs using a 13 mm Wrench
(not included).
Note: Don’t overtighten the Lag Screws
(less than 10 ft-lb). Do not use an
impact driver.
Check for tightness of all hardware,
now the Tire Rack is ready for use.
4
5
6
ASSEMBLY
STEP 4
1
65
2
65
STEP 5
1
2
4
3
3
7
8
STEP 6

headline bars tabs continuation tabs notes warnings
headline bars
tabs
continuation tabs
notes
warnings
model no. 009-0078-8 | contact us 1-888-942-6686
8
MAINTENANCE
headline bars
tabs
continuation tabs
notes
warnings
WARNING!
The unit must be installed according to the instructions. Never
install more than one unit on any two wall studs. All fasteners must
be checked and tightened periodically.
FPO
MAINTENANCE
Periodically check that all hardware is tight and
secure.
Frequently check the condition of the tire rack.
Make sure all components are in good condition. If
the tire rack becomes damaged through accident,
or if any damage is noted, the product should
be replaced. Keep the tire rack clean of dirt,
grease and oil. Clean with a moist cloth and mild
detergent.