NETGEAR DVG1000 User manual

DVG1000 N150 Wireless N
ADSL Modem Router
Quick Start Guide

2
Welcome to ACN
Congratulations on your selection of the Netgear® N150.
The Netgear®N150 incorporates numerous technologies into one device that
can act as the central connection point for all of your online activities within
your home or oce. With Wi-Fi™ N speed to deliver enhanced range and
speed, and four Ethernet ports to connect all your additional equipment and
gaming consoles.
Once you are online check our website at acnpacic.com.au for further
information and technical support if required.
acnpacic.com.au/myaccount
MyAccount is your Online Customer Portal. It enables you to check your
monthly broadband usage, change your broadband plan, purchase
extra broadband Top Up data, download your invoices, and pay your
ACN account.
Customer Service
Our dedicated Customer Service team is available 6 days a week
Hours of operation
9:00am - 6:00pm (AEST) Monday to Friday
10:00am - 6:00pm (AEST) Saturday
Contact details
Email Enquiries: enquiries@acnpacic.com.au
Online Chat: acnpacic.com.au/contact-us
Customer Service: 1300 881 778
For further information about pricing, other services available from ACN, the
ACN Opportunity or becoming an ACN Independent Business Owner (IBO),
please visit acnpacic.com.au.

3
What’s inside?
Welcome to ACN 2
Customer Service 2
Netgear® N150 setup guide 4
Front panel 4
Back panel 4
Getting to know your device 5
Logins and passwords 6
Equipment setup 7
Setup Wi-Fi™ connections (optional) 9
ADSL MyAccount functionality 10
How to login to MyAccount 10
Add a data top up 12
Troubleshooting 12
Dead-On-Arrival (DOA) and Early Life Failure (ELF) 13
Warranty 13
Conditions 13
Warranty claims 14
Standard Form of Agreement 15
Further information 15

4
Netgear®N150
setup guide
The Netgear® N150 ADSL2+ Modem Router comes pre-congured with your
ADSL settings.
We recommend Microsoft® Windows 7, XP, or Vista as the minimum operating
system requirements. Ideally, your computer should be less than ve years old
and of a reasonable specication to get the most out of the Internet.
It is important to ensure your computer is up to date with the latest operating
system and any relevant anti-virus, rewall and Internet protection software.
Front panel
The front panel consists of 9 LED lights and 2 buttons.
Back panel
The back panel consists of port connections and also the power (on/o) button.
Laptops connect with Wireless-N/G USB 2.0 Adapter (WNA3100, WNDA3100 or WG111)
Storage
connected
to USB port
Connects
to ADSL2+
Connects to desktop
computers with
Network Card (GA311)
Power
Supply
Ethernet
LAN Ports 1-4
DSL
Light
USB
Light
WPS
Connection
Wi-Fi
Light
Internet
Light
Connects
to power
Power
on/o

5
Getting to know your device
The table below describes the LED icons and buttons on the front panel of
the Netgear® N150 Modem Router.
Icon LED Activity Description
Power Solid green Power is supplied to the Modem Router.
Solid red Failure or a device malfunction has occurred. Attempt to restart
your Modem Router.
O Power is not supplied to the Modem Router. Check that the
power adaptor is plugged in and your electrical power point
is switched on.
Restore
factory
settings
The LED blinks momentarily when the restore factory settings
button on the bottom of the unit is pressed for 6 seconds.
The Power LED then blinks red three times when the restore
factory settings button is released and then turns green as the
gateway resets to the factory default settings.
LAN 1-4 Solid green The LAN port has detected an Ethernet link with a device.
Blinking green Data is being transmitted or received.
O No link is detected on this port.
USB O • No USB device connected.
• ‘Safely Remove Hardware’ has been activated.
• An error has occurred with the device.
Solid green USB device is ready to use.
Blinking green USB device is in use.
DSL Solid green You have a DSL connection. DSL port is synchronised with
your network.
Blinking green Indicates that the Modem Router is negotiating the best
possible speed on the DSL line.
O The unit is o or there is no IP connection.
Internet Solid green You have an Internet connection. If this connection is dropped
due to an idle time-out but the DSL connection is still present,
the light stays green.
Solid red Connection to the Internet has failed to connect.
Blinking green Data is being transferred or received over the wireless link.
Wireless O No Internet connection is detected or the device is in
bridge mode.
Solid green There is wireless connectivity.
Solid red Wireless connection disabled.
Blinking green Data is being transmitted or received over the wireless link.
WPS Solid green Indicates that wireless security has been enabled.
Blinking green WPS-capable device is connecting to the device.
O WPS is not enabled.
(Wi-Fi™
Protected
Setup)

6
Use Username Password What is it used for? Example
Internet This is your
username you
nominated at
sign-up. This
can also be
found on the
conrmation
email sent to
you when you
completed
sign-up.
This is the
password you
nominated
during online
sign-up. This
can also be
found on the
conrmation
email sent to
you when you
completed
sign-up.
Your Internet
username and
password is a
unique login for
your ADSL or
Naked DSL Service.
Internet login:
Username:
[email protected]
Password:
Abcdef123
Modem
Wi-Fi™
Your Wi-Fi™
username
is your SSID
provided on the
Modem Router
label which can
be found on the
bottom of your
Modem Router.
Your Wi-Fi™
password is
your Network
Key provided
on the Modem
Router label.
Your Modem
Wi-Fi™ username
and password is
required when you
connect a device
wirelessly to your
Modem Router.
Username:
WNSQYWXD
Password:
33231245
MyAccount Your MyAccount
Username is
your 9 digit
Customer ID
Number which
can be found
on your rst
invoice.
You would have
been asked
to create a
password for
MyAccount
during
registration.
Your MyAccount
username and
password enables
you to login to
MyAccount to
manage your
details.
Username:
1000000001
Password:
MagicBeans
NETGEAR®
Smart
Wizard
admin password The Netgear®
Smart Wizard login
details enables
you to gain access
to your Modem
Router settings
if you wish to
customise your
setup.
The username
and password are
generic:
Username:
admin
Password:
password
Logins and passwords
The table below outlines the required username and password format for
your Internet connection and online tools.

7
Equipment setup
Step 1 - Your equipment
Once you have received your ADSL activation email from us, take the
following equipment out of the box.
Modem Router
Phone Cable
Power Adaptor
Ethernet Cable
Step 2 - Connect splitter
(not required for Naked DSL)
Connect a DSL splitter directly to
the telephone. If you do not have
an existing splitter, please purchase
one from a retail store - alternatively
contact Customer Service to order
a splitter.
Step 3 - Connect router
Connect the supplied grey
telephone cable from the splitter’s
ADSL port to the grey ADSL port on
the Modem Router.
Step 4 - Connect your home
telephone (not required for
Naked DSL)
Connect your telephone to the
phone port on the splitter.

8
Step 5 - Connect computer
Connect the supplied yellow
Ethernet cable from the Modem
Router’s yellow LAN1 port to your
computer’s Ethernet port.
Step 6 - Connect power
Connect the power adapter to the
router then plug it into an electrical
outlet. Ensure electrical outlet is
powered on. Press the black power
button at the back of the Modem
Router to turn on the device.
Step 7 - Check installation
1. If the power is connected correctly, the POWER LED will light up.
2. If the grey telephone cable and the splitter are connected correctly,
the ADSL LED will ash and after a few seconds turn solid green.
3. Since the Modem Router is pre-congured, the INTERNET LED will
turn green after a few seconds.
4. If the yellow Ethernet cable is connected correctly, the
corresponding ETHERNET (LAN) LED will light up.
5. Once you have conrmed the above, open your web browser
(e.g. Internet Explorer, Chrome, Firefox or Safari) and go to your
favourite website.
Congratulations, you are now connected to the Internet.

9
Setup Wi-Fi™connections (optional)
By default, Wi-Fi™ is turned on and is secured using Wi-Fi™ Protected Access
with a Pre-Shared Key (WPA2-PSK).
Please take note of your Wi-Fi™ Network Name (SSID) and Network Key
(Password) printed on the sticker attached to the bottom of your Modem
Router, as these are necessary to connect to wireless devices.
To connect a Wi-Fi™ enabled device (such as your laptop, mobile phone,
tablet or gaming device) to the Internet, please ensure that the Wi-Fi™ on the
device is switched on. Then select your wireless network (this is your Wi-Fi™
Network Name [SSID]) and click ‘Connect’.
You will be required to enter your Network Key (Password) and‘Connect’.
Please note the password is case sensitive.
Wait approximately 30 seconds for the connection to establish.
Repeat for each device. Your Netgear®N150 device can connect up to
4 devices simultaneously.
Your Wi-Fi™ devices should now be connected and you will be able to access
the Internet via Wi-Fi™.
Restore factory
settings
Serial number and
MAC address
Wi-Fi™network
name and password
WPS
security pin

10
ADSL MyAccount functionality
ACN provides you with the ability to view and manage your account online
through‘MyAccount’. The following functions are available to you:
• Change your ADSL rate plan.
• Relocate your service to another address.
• View any equipment orders you have placed.
• View your usage. You are able to determine your o-peak and peak
data quota. This will show you the data you have consumed until 30
minutes previously. ACN also sends courtesy email notications to
your ACN email address to notify you when you are reaching your data
allowance at various intervals so you are aware of your usage and can
manage accordingly.
How to login to MyAccount
1. Visit acnpacic.com.au and click on 'MyAccount' at the top of
the webpage.