NETGEAR Nighthawk User manual

Choose 2Rent
Phone [phone]
Fax [phone]
[e-mail]
www.choose2rent.com
version C2R-2 2019
page 1 of 3
NETGEAR Nighthawk LTE Mobile
Router Setup Guide
POWER ON - Press and hold he Power button on the mobile router for three
seconds.
POWER OFF –Press and hold the Power button for five seconds
WAKE/TOGGLE SCREENS –Tap the Power button and release quickly
Understanding your Device
1. LCD Screen
2. Power
3. Signal Strength
4. Network type
5. Active Uplink or downlink (displays only during transfer)
6. Data usage
7. Number of connected devices

page 2 of 3
Connection Option 1:
Manual SSID Wifi Connection
1. To View your SSID name and password, refer to the label located
directly on the device OR press and release the Power button to
toggle through the LCD displays.
2. Connect your device to the SSID/Password provided
Connection Option 2:
WPS Connection
1. Download the NETGEAR Mobile App for iOS* or Android
a. *App download is included by default within your iPad rental
2. Be sure to connect your device to the Nighthawk WIFI network before
opening the app
3. In the mobile App, Swipe down to display the dashboard
4. Tap Wi-Fi to display the WIFI page
5. Tap WPS
6. Within two minutes, tap or click the WPS button on the device you are
trying to connect to (Printer).
You can confirm a device has been connected by navigating to the
Connected Devices Menu

page 3 of 3
Charging Your NETGEAR Nighthawk Mobile Router
Use the QuickCharge power adapter and plug the small USB (Type-C) end
into the bottom of the modem. Plug the large USB into the provided USB
adapter and plug into the wall socket.
Please Note: The unit must be turned off AFTER you plug in the unit in order to attain a
fast charge. If it is turned on before pluggin in the unit, it will turn the unit back on and it
will not charge properly.
Please call our support team if you need assistance
setting up your rental devices
1(800) 622-6484