NETGEAR RAX15 User manual

Quick Start
1
On your mobile phone, download the
Nighthawk app and follow the setup
instructions.
Tap the Security icon in your
Nighthawk app to verify that NETGEAR
Armor is activated.
Your Nighthawk comes with NETGEAR
Armor cybersecurity. Armor blocks
online threats like hackers and phishing
attempts on your devices.
2
Download the
Nighthawk app to
install your router
Secure your
devices with
NETGEAR Armor™
3
Check out everything you can do
on the Nighthawk app! Run a speed
test, pause the Internet, see all the
connected devices, and more.
Do more with the
app

E G
D
F
A
B
1
2
3
456
C
Contents
Overview
Router Ethernet Cable Power Adapter
(varies by region)
Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
June 2020
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien
à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy‑policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms‑and‑conditions. If you do not agree, return the device
to your place of purchase within your return period.
Regulatory and Legal
Troubleshooting
If you’re having problems with the installation, try one of the following:
• Turn off your modem and router and disconnect them. Reboot your modem.
Reconnect your router to your modem, and try installing with the Nighthawk app
again.
• If you’re still unable to install your router using the Nighthawk app, manually
install it using the router web interface.
Visit http://www.routerlogin.net to access the router web interface.
For more information, visit netgear.com/routerhelp.
A
Power On/Off Button
1
- Power LED
B
WPS Button
2
- WPS LED
C
USB 3.0 Port
3
3
- Internet LED
D
Reset Button
4
4
- WiFi LED
E
Internet Port
5
5
1-4
- Ethernet Ports 1–4 LEDs
F
Ethernet Ports 1–4
6
- USB LED
G
Power Connector