Nevco MPCX Soccer Control Specifications

Rev. 2/18/15 135-0135
Scoreboard Operator’s Instructions
MPCX Soccer Control
Since 1934
Retain this manual in your permanent files

These Instructions are for the Following Models:
LED models: Incandescent models:
1515
1520
1525
1615
1620
1625
1632
200
230
25xx
26xx
27xx
4755
4765
4555-D
4565
3502, 3504
3514, 3515
3516, 3520
3525, 3534
3550, 3555
3600, 3602,
3604, 3614,
3615, 3616,
3617, 3618,
3619, 3620,
3621, 3625,
3624, 3655,
3656, 3657
7504, 7505,
7516, 7520,
7524, 7525,
7530
7604, 7605,
7614, 7615,
7616, 7620,
7624, 7625,
7630
9505, 9510
9515, 9710
1415
1020
1025
24xx 3402
3404
3414
3415
3416
3425
3434
3455
4455
4465
7404
7405
7416
7424
7425
7430
9405
9410
Thank You
Thank You for choosing NEVCO. We appreciate your business.
The following instructions will help you become familiar with the operation and features of the scoreboard
system.
Please take a few minutes to study this manual, and to practice with the control.
If you ever have any questions or comments, please call or email us.
NEVCO GUARANTEE
To view or receive the most recent copy of the Guarantee, please visit our website, www.nevco.com
or call 1-618-664-0360
NEVCO, Inc.
301 East Harris Avenue
Greenville, IL 62246-2151 USA
USA TOLL-FREE 800-851-4040
CANADA TOLL-FREE 800-461-8550
International Telephone: [phone]
Website: www.nevco.com
Email: [email protected]
Note:
Some features may not be available
on some models.
May not be compatible with certain older scoreboards

MPCX Receiver
MPCX CONTROL (rear view)
Belt Clip
Battery Compartment
Cover (2 x AA)
TIME ON
MPCX SOCCER CONTROL (front view)
SHOTS (on Goal)
SAVES
C/K (Corner Kicks)
PEN (Penalties)
TIME OFF
HORN
HALF / SCORE ( also functions as
Escape)
Selects HOME or GUESTS
(for scoring and shots on goal)
Add to or Subtract from the selected
feature / also used to select options
SET TIME
LCD Display (16 characters x 2 lines)
Power ON / OFF Switch
OPTIONS key
Allows you to:
Clear Scoreboard
Set Brightness of Scoreboard
Set Direction Timer Will Count
Enable / disable Auto Horn
Check Battery Level
Check Signal Strength
Turn Security ON/OFF
Re-link Control
Select Scoreboard Type
Select Data Layout (Type G Only)
BNC Connector
(Signal out to scoreboard)
LED Status Indicator
(On steady = Power)
(Blinking = Signal I/O)
Power Input
(9 V DC)
Not Used

TABLE OF CONTENTS
QUICK START GUIDE ................................................................................................................ 1
To Start a New Game............................................................................................................. 1
To Set the Time ...................................................................................................................... 1
To Start the Timer.................................................................................................................. 2
To Stop the Timer .................................................................................................................. 2
To Add to the Score............................................................................................................... 2
ToAdd to Shots on Goal......................................................................................................... 2
ToAdd to Saves....................................................................................................................... 2
ToAdd to C/K.......................................................................................................................... 2
ToAdd to Penalties ................................................................................................................. 2
KEYBOARD FUNCTIONS .......................................................................................................... 3
GREETING SCREEN .................................................................................................................. 3
MAIN SCREEN ............................................................................................................................ 4
MULTI-FUNCTION SCREEN ................................................................................................... 6
OPTIONS MENU........................................................................................................................... 8
PROCEDURE TO MATE A CONTROL AND RECEIVER(S)............................................................. 11
SELECTING SCOREBOARD MODEL........................................................................................... 12
SELECTING DATA LAYOUT....................................................................................................... 13
TROUBLESHOOTING CHART .............................................................................................. 14

1
QUICK START GUIDE
Note: It is assumed here that the control has been configured for the correct scoreboard type and the control has
been linked to the desired receiver(s). Both functions are explained in the setup guide that comes with a new
control. The control is set to “3500” models by default at the factory (Type “C”). Switch it to another series if
needed in the field from the OPTION menu. (See pages 11 and 12 for detailed instructions). It is assumed that
the receiver is powered ON.
To Start a New Game
Press
The control will display a greeting while it establishes
communications with its receiver(s). (Up to 30 seconds).
Next the display will show the half, the time status and the
score.
Note: The cursor indicates the active function.
Note: If the receiver has been powered OFF then the
scoreboard data will have been cleared.
Press The control will display
Press to clear the scoreboard data.
The control will display the main screen
Note: The Half is automatically set to 1.
To Set the Time
Press to set the time (Minutes).
Use the “+” or “-” keys to enter the desired number
of minutes.
Note: Hold the key down for fast advance.
Note: You can return to the main screen at any time by
pressing HALF / SCORE.
You are now ready for the game to begin.
ON/OFF
MPCX Soccer
>>>>>
OPTIONS
Clear Scoreboard
Press(+)
Half: 2 Time:OFF
Home: 3 Guest: 1
Strikes:0
Set Time: UP
0:00.0
Strikes:0
SET
TIME
Set Time: UP
12:00.0
Strikes:0
Half: 1 Time:OFF
Home: Guest:
Strikes:0
+
Half: 1 Time:OFF
Home: Guest:
Strikes:0

2
To Start the Timer
Press
The control will display
To Stop the Timer
Press
The control will display
To Add to the Score
Press then or then
Note: When the scoreboard data is cleared the scores
display a blank. Add 1 to display a zero.
ToAdd to Shots on Goal
Press then or then
Note: When the scoreboard data is cleared the shots
display a blank. Add 1 to display a zero.
ToAdd to Saves
Press again then or then
Note: When the scoreboard data is cleared the saves
display a blank. Add 1 to display a zero.
ToAdd to C/K
Press again then or then
Note: When the scoreboard data is cleared the C/K
display a blank. Add 1 to display a zero.
ToAdd to Penalties
Press again then or then
Note: When the scoreboard data is cleared the Penalties
display a blank. Add 1 to display a zero.
Please consult the following sections of this manual for more details, functions, and features
HOME GUESTS
Half: 1 Time:ON
Home: Guest:
Strikes:0
TIME
ON
TIME
OFF
Half: 1 Time:OFF
Home: Guest:
Strikes:0
Half: 1 Time:ON
Home: 1 Guest: 0
Strikes:0
HOME GUESTS
SHOTS
SAVES
C/K
PEN
Shots On Goal:
Home: 0 Guest: 1
+
+
HALF
SCORE
HOME GUESTS
Saves:
Home: 1 Guest: 0
+
Corner Kicks
Home: 0 Guest: 1
Penalties
Home: 1 Guest: 0
SHOTS
SAVES
C/K
PEN
SHOTS
SAVES
C/K
PEN
SHOTS
SAVES
C/K
PEN
HOME GUESTS
+
HOME GUESTS
+

3
KEYBOARD FUNCTIONS
GREETING screen
When you are done using the control turn it OFF to conserve
batteries.
Note: Always power ON the receiver(s) (scoreboard(s)) first, and wait a few seconds for the
receiver(s) to initialize (red LED illuminates) before powering ON the control. If the control is
already ON, turn it OFF, wait a few seconds, and then turn it back ON.
Note: If the scoreboard fails to respond to the control, power the control OFF, wait a few
seconds, and then try again. Please allow time for each control to complete its powering ON
process (main screen appears) before turning ON another control.
MPCX Soccer
>>>>>
ON/OFF
ON/OFF
GREETING
When the control is Powered ON, the greeting showing the
type of control and the sport is displayed. This greeting
continues to be displayed while the control establishes
communications with its receiver(s). (May take up to 30
seconds)
Accessed
by
pressing

4
MAIN screen
Selects the Half
Use the “+” or “-” keys to change the half.
Note: The cursor indicates the selected function.
Use the “Home” or “Guests” keys to select the team
whose data you want to change.
Then use the “+” or “-” keys to
change the data for the selected
feature.
Note: Hold the key down for fast advance.
Note: When the scoreboard data is cleared the scores display a blank.
Add 1 to display a zero.
Half: 1 Time:OFF
Home: 0 Guest: 0
Strikes:0
Half: 1 Time:OFF
Home: 0 Guest: 0
Strikes:0
Half: 1 Time:OFF
Home: 0 Guest: 1
Strikes:0
+
-
HOME
GUESTS
HALF /
SCORE
Half: 1 Time:OFF
Home: 0 Guest: 0
Half: 1 Time:OFF
Home: 0 Guest: 0
Accessed
by
pressing
HALF /
SCORE
MAIN
The main screen shows the Half, the Timer Status, and the
Scores. You must use this screen if you want to change the Half
or Scores. Press HALF / SCORE any time to return to this
screen. The cursor indicates the currently selected function. Use
the HOME, GUESTS, or HALF / SCORE keys to select the
function, then, use the “+” or “-” keys to change its value and
send it to the scoreboard. You should keep this screen displayed
during the game.

5
Turns the time ON.
Turns the time OFF.
Sounds the horn. (Approximately 2 seconds)
Note: Does not change the control display.
Note: Hold key down to extend duration.
Note: If, when the main screen appears, it shows Half 0 and the
scoreboard remains dark and does not respond to the control, then the
receiver was not found. Power the control OFF, make sure all associated
receivers are powered ON, and try the control again. Please allow time for
each control to complete its powering ON process (main screen appears)
before turning ON another control.
Half: 1 Time:OFF
Home: 0 Guest: 1
TIME
OFF
TIME
ON
Half: 1 Time:ON
Home: 0 Guest: 1
HORN
Half: 0 Time:OFF
Home: 0 Guest: 0

6
MULTI-FUNCTION screen
This multifunction key is used to access the following functions. Each press of this key
moves you to the next function. The order that the 4 screens appear is programmable
from the options menu. Changing the order of this data allows for configuring of what
will be displayed on soccer boards capable of displaying less than 4 data for both home
and guest teams.
Note: You can abort the list at any time by pressing HALF / SCORE.
Use the “Home” or “Guests” keys to select the team, then
use the “+” or “-“ keys to change the data for the selected
team.
Use the “Home” or “Guests” keys to select the team, then
use the “+” or “-“ keys to change the data for the selected
team.
Use the “Home” or “Guests” keys to select the team, then
use the “+” or “-“ keys to change the data for the selected
team.
Use the “Home” or “Guests” keys to select the team, then
use the “+” or “-“ keys to change the data for the selected
team.
Penalties:
Home: Guest: _
Corner Kicks:
Home: Guest: _
Saves:
Home: Guest: _
Shots On Goal:
Home: Guest: _
MULTI-FUNCTION
This Multi-function screen provides access to Shots on Goal as
well as Saves, Corner Kicks (C/K) and Penalties. Use the Multi-
function key to step thru functions and screens. The cursor will
indicate the selected function. Use the HOME or GUESTS keys
to select the team. Use the “+” or “-” keys to update the selected
functions value and send it to the scoreboard.
Accessed
by
pressing
Shots On Goal:
Home: 0 Guest: 1
SHOTS
SAVES
C/K
PEN
SHOTS
SAVES
C/K
PEN

7
SET TIME screen
Note: The SET TIME key is active only if the time is stopped.
Pressing it with time running causes the control to prompt.
Allows you to set the time (Minutes).
Use the “+” or “-” keys to enter the desired
number of minutes.
Note: Hold the key down for fast advance.
Press again to set the Seconds:
Use the “+” and “-” keys to enter the
desired number of seconds.
Note: Hold the key down for fast advance.
Press again to set the Tenths of a Second:
Use the “+” and “-” keys to enter the
desired number of tenths of a second.
Note: Some scoreboard models may not display tenths of seconds.
Note: To change the direction the timer will count, use the OPTIONS menu.
Note: Some timers will display tenths of seconds while others display only whole seconds. In all cases the time is
divided into fractions of a second for greater accuracy. It may be possible to start and stop the time and see no
change in the displayed time even though several fractions of a second may have been counted off. The fractions of
seconds are always cleared when a new time is set.
Set Time: UP
0:00.0
Strikes:0
SET
TIME
Set Time: UP
0:00.0
Set Time: UP
0:00.0
SET
TIME
SET
TIME
Time Is Running
Stop Time To Set
SET
TIME
Set Time: UP
0:00.0
Strikes:0
Accessed
by
pressing
SET TIME
This screen is for setting the time. (Timer must be stopped).
The cursor indicates the Minutes, Seconds, or Tenths of
Seconds as being selected. Use the SET TIME key to step to the
desired element of time, then, use the “+” or “-” keys to change
its value and send it to the scoreboard. (Hold down the “+” or “-
” keys for fast advance).
Note: To change the direction the timer will count, use the
OPTIONS menu.

8
Options Menu
Several option settings are available to fine tune the scoreboard system to your needs. These
settings are saved in the control. They are remembered even if the control is turned OFF or the
batteries removed. When a control turns ON the scoreboard, these settings are sent to the
scoreboard and are used to define how it operates. This allows each coach or group to have their
own control with its unique option choices, thus eliminating the need to set up the options every
time the scoreboard is used. For example, Brightness (Baseball – day time) (Soccer – night time).
It is also possible to use more than one control to operate the scoreboard. For instance, the Time
can be controlled by one person while someone else operates the rest of the scoreboard with
another control.
The Options key can be used to access the following features. Each press of the options
key moves you to the next option screen.
Note: In this illustration the cursor indicates the default factory settings.
Note: You can return to the main screen at any time by pressing HALF / SCORE.
Allows you to clear (set to zero) the scoreboard data.
Note: The half will be set to 1, scores and shots are set
to blank.
Allows you to select the Brightness Level of the
scoreboard. (Bright or Dim)
Allows you to set the direction the timer will count.
Allows you to enable or disable the automatic horn.
(Sounds for about 4 seconds when time has expired).
(Scoreboard Model 2000 Series only.)
Turns the control OFF and blanks all scoreboard
functions except Time. Uses the displayed time as the set
time if it is a valid Time Of Day, otherwise blanks the
entire scoreboard.
Note: Not all scoreboard models support Time Of Day.
OPTIONS
Clear Scoreboard
Press(+)
Time Direction
(+)Up (-)Down
Auto Horn
(+)On (-)Off
Set Brightness
(+)Bright (-)Dim
Time Of Day
Press(+)

9
Reports the condition of the batteries in the control.
Allows you to check signal strength when connected to a
receiver.
Used as an indication of reliability of communications.
Affected by distance, battery condition, obstructions and signal
interference.
This menu option allows you to access settings that
affect how the control operates. Generally, these settings
need not be changed and should only be changed by an
experienced operator or under direction from the Nevco
Service Department.
Press the following key sequence:
to gain access to the following additional menu items.
Battery Level
L >>>>>> H
Signal Strength
Press(+)
Signal Strength
Signal Strength
L >>>>>>>>> H
Enter Code to
Change Settings
HOME
GUESTS
+
-
Or
Press the Options key to return to the main screen.

10
The Security setting is used to allow multiple controls to
simultaneously operate the scoreboard.
With the Security set to (+)ON, the scoreboard will
ignore all other controls and can be operated only by the
control that turned it ON. When this control is turned
OFF another control can be used to turn the scoreboard
ON. Should the batteries go dead or the 1
st
control leave
the area – Power must be cycled to the scoreboard to
allow another control to operate the scoreboard.
If the Security is set to (-)OFF, multiple controls can be
used to operate the same scoreboard or scoreboard
system. This allows one person to operate part of the
scoreboard, such as the clock, while someone else
operates the rest of the scoreboard with another control.
Allow each control to establish communications with its
receiver(s) (Greeting screen disappears) before powering
ON the next control.
Note: Set the Security of ALL controls used in a multi-
control system to (-)OFF.
Note: All controls need to be configured for the
appropriate scoreboard model group and linked to the
same receiver(s).
Note: The control display will only update when keys
are pressed.
Note: Make sure all controls of a multi-control
scoreboard system are powered OFF before starting the
system. Power ON the system receivers, then, power
ON the control that will determine the scoreboard
attributes (Brightness Level etc.). Next; power ON the
remaining controls. Please allow time for each control to
complete its powering ON process (main screen appears)
before turning ON another control.
Security
(+)On (-)Off

11
ON/
OFF
This menu option reports the number of receivers the control is
currently linked to (0/0), and the number of receivers on its
“Link To” list (0/0). The option also allows you to link a control
to a scoreboard (receiver) or group of scoreboards (receivers).
This link procedure is required only at the time of installation,
when additional controls are added to an existing system, a
change to the system configuration is needed, or a control or
receiver has been repaired or replaced.
An MPCX control can operate up to eight scoreboards
(receivers) in a dual type configuration. (All scoreboards must
be in the same model series).
Procedure to mate a control and receiver(s)
Step 1. Insert the batteries included with the MPCX control or turn the control ON by pressing
Step 2. Power up one to eight receivers using the 9V wall plug-in power supply provided with
the receiver. Because all receivers powered up and within range of this control will be
linked to this control with this procedure, power down all receivers not to be mated with
new control.
Step 3. Press the button until the display reads
Step 4. Enter the “Code” with the buttons in the sequence
Step 5. Continue pressing the button until the display reads
Step 6. Press the button. The control will link to all receivers in range.
Step 7. This process could take as long as 3 minutes. The control will automatically reset when
linking is complete and each scoreboard connected to a “linked” receiver will light.
Repeat steps 3 – 5 in the “Re-Mating” procedure below to ensure the correct number of
receivers are linked indicated by 0/0 on the “Link Control screen”. The 0/0 on this screen
indicates how many receivers are found / how many receivers are linked.
If more receivers than intended are linked to the control, then power down any MPCX
receivers in the area that are within 2000’ and repeat the process. If you cannot find these
receivers, or they are located on an adjacent property, you may have to perform this
process in another location.
This process creates a list of receivers in the control. The control can only communicate
with receivers on this list. The list remains intact even if the batteries are removed from
the control. During normal operation (with any or all receivers ON), when you turn the
control on, it searches for receivers on its list and the scoreboard(s) will light.
Note: During normal operation, the receiver should always be powered ON before the control.
In a multi-control system, the controls must be powered ON and allowed to find the receiver one
at a time. Wait about 30 seconds between powering-up controls.
Link Control 0/0
Press (+)
Enter Code to
Change Settings
Link Control 0/0
Press (+)
Options
HOME
GUESTS
+
-
Options
+

12
Selecting Scoreboard Model
The next press of the Options key will display one of the following screens. It indicates which of
the scoreboard model series the control is currently configured to operate. Use the “+” key to
toggle thru the scoreboard models. Press HALF / SCORE to exit the options routine. The last
scoreboard series displayed will become the new control configuration.
MPCX
Control Scoreboard Model Screen to Select
Soccer
1515, 9505, 9515, 1615, 9605, 9715, 1415 Type A (+)
1520, 1525, 9505, 9515, 1620, 1625, 9605, 9715, 1020, 1025, 9405, 9410 Type B (+)
3502, 3504, 3514, 3515, 3516, 3520, 3525, 3534, 3550, 3555, 1632, 9605,
9505, 9715, 9515, 3402, 3404, 3414, 3415, 3416, 3425, 3434, 3455, 9405 Type C (+)
7504, 7524, 9505, 9515, 9605, 9715, 7405, 7424 Type D (+)
7604, 7605, 7614, 7615, 7616, 7620, 7624, 7625, 7630, 7631, 7632, 3600,
3602, 3604, 3614, 3615, 3616, 3617, 3618, 3619, 3620, 3621, 3625, 3634,
3650, 3655, 3656, 7505, 7516, 7520, 7525, 7530, 9605, 9715, 9505, 9515,
7405, 7416, 7425, 7430, 9405, 9410
Type E (+)
200, 230, 24xx, 25xx, 26xx, 27xx, 9510, 9515, 9710, 9715 Type F (+)
3657 Type G (+)
4755, 4555, 4565, 4765 Type H (+)

13
Selecting Data Layout
Note: This option is only available in Scoreboard Model “Type G”
For the 3656 and 3657 soccer boards the data layout can be changed to display different data in
different sequences. The following are the possible data layouts. Use the “+” key to toggle thru
the different data layouts.
This is the default layout: Shots, Saves, Corner Kicks, Penalties.
Shots, Corner Kicks, Penalties, Saves
Shots, Penalties, Saves, Corner Kicks
Saves, Corner Kicks, Penalties, Shots
Saves, Penalties, Shots, Corner Kicks
Corner Kicks, Penalties, Shots, Saves
Player In, Player Out, Shots, Saves
Player In, Player Out, Penalties, Corner Kicks
Data Layout (+)
SHT SAV CNR PEN
Data Layout (+)
SHT CNR PEN SAV
Data Layout (+)
SHT PEN SAV CNR
Data Layout (+)
SAV CNR PEN SHT
Data Layout (+)
SAV PEN SHT CNR
Data Layout (+)
CNR PEN SHT SAV
Data Layout (+)
PLI PLO SHT SAV
Data Layout (+)
PLI PLO PEN CNR

14
TROUBLESHOOTING CHART
Problem Cause Solution
Scoreboard will not turn ON when control
is turned ON
Control continues to search after an
unusually long time
Data won’t change on control
Control display shows incorrect
information
Receiver not
working
Check LED status indicator on receiver
(on solid = power, blinking when key is
pressed on control = has signal I/O)
Restore power to
receiver
Control signal weak
Check signal
strength (see
Options menu)
Battery level low Replace batteries
Control in a poor
location
Make sure the control is in clear line of
sight of the scoreboard
Move closer to scoreboard
Control is linked to extra unwanted receivers
or wanted receivers are not powered ON.
Use the Options Menu to check the
number of receivers the control is linked
to and the number of receivers on its
list.
Control is not linked to this scoreboard
Find and use the control for this
scoreboard.
Link the control to this scoreboard or
group (see Options Menu)
Didn’t sync up Power control OFF, then ON
Control is ON but scoreboard is OFF (data
is changing on control)
No power to scoreboard Check all switches, breakers, and fuses
Bad connection between Receiver and
scoreboard module Check all cables and connections
Scoreboard is ON but does not respond to
the control Control and receiver are not communicating Turn control OFF, then ON to establish communications
Cannot operate scoreboard with my control
(Scoreboard is on, 1
st
control has left area) Scoreboard was left with security ON Cycle power to receiver
I cannot set the time The time is running Stop the time first
Cannot turn the time ON Time at 0.0 and set to count down Set some time on the clock or change
timer direction to UP count
Scoreboard is displaying data in the wrong
places
Control is not configured for correct
scoreboard model series
Verify your scoreboard model, and from
the Options Menu, select “Enter Code to
Change Settings”. Enter the code and
select the “Scoreboard Model” option.
Use the “+” key to view and select the
correct scoreboard model series. (See
Options Menu section for list of
models)
Home Shots & Guest Shots are reversed on
scoreboard (7500A or 7500B series)
Horn sounds about 1 second after timer
counts down to zero
Scoreboard is ON – Control is OFF Batteries were removed while scoreboard
ON
Install batteries -- power ON then OFF
Cycle power at scoreboard
Only one control of a multi-control
scoreboard system will operate the
scoreboard
One or more of the controls has its Security
set to “(+)ON”
Set the Security of ALL controls used in
a multi-control system to “(-)OFF” (See
the Options Menu)

15
Scoreboard is being controlled by more
than one control
Security is set to “(-) OFF”.
Note: The scoreboard assumes the security
of the control that turns it ON.
(a) In the Options Menu, set the
Security to “(+) ON”. (b) Turn the
receiver and control OFF. (c) Turn the
receiver ON. (d) Turn the control ON.
If the problem persists please contact the Nevco Service Department.
800-851-4040

16
WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons during device operation. To ensure
compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be
co-located in conjunction with any other antenna or transmitter.
Features Specifications
MPCX Control: Size:
oSmall and light weight (fits in or clips to pocket)
Approximately 3¼” x 5½” x
7
/
8
”
oTactile confirmation of key pressed
Weight:
oHigh visibility transflective display
5½ oz. (including batteries)
oConvenient wireless operation
Keypad:
oBuilt in wireless signal strength meter
12 keys
oPower conservation circuitry
Display:
oBuilt in battery meter
32 character LCD
oLong battery life
Power requirements:
oUses inexpensive, readily available AA batteries
Two AA cells (included)
oSealed keyboard
Operating distance:
oNo slip grip
1000 feet (Clear line of sight)
oErgonomic single hand operation
Receiver Output:
oInternal antenna
One BNC connector (2 loads with up to 1000
ft. coax each)
oMate multiple controls to same scoreboard
Operating temperature:
oOperate dual scoreboards
0°F to 150°F
oRetrofits to existing wired installations
Certifications:
FCC part 15 Class B
CE
RoHS
N OTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the approval of Nevco could void the user’s authority to operate this
equipment.
This class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations.
Cet appareil numerique de la classe B repecte toutes les exigences du Reglement sure le materiel brouller du Canada.