NEW AIM PTY BunkBed-533A User manual

NEW AIM PTY LTD Made in Malaysia
BunkBed-533A
TRILOGY BUNK BED
ASSEMBLY INSTRUCTION

P.1
SAFETY PRECAUTION
Do NOT STEP, SIT or JUMP on the SIDE RAIL & METAL BASE.
IMPORTANT:
Falls from elevated beds can be fatal and deaths have occurred
where children have fallen from elevated beds. This is relevant for
all ages. The risk is greater for younger children.
The risk of injury or death from a fall from an elevated bed
compared to a non-elevated bed is:
10 x greater for 7-8 year olds
7 x greater for 9-10 year olds
3 x greater for 11-12 year olds
WARNING:
THE UPPER BUNK MUST BE MORE THAN 2 M FROM ANY
CEILING FAN.
!
WARNING:
TOP BUNKS AND ELEVATED BEDS ARE DANGEROUS AND ARE
NOT RECOMMENDED FOR CHILDREN UNDER THE AGE OF 9
!

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THIS BED
SAFETY WARNINGS AND GENERAL INSTRUCTIONS
Follow the instruction on the WARNING labels on top bunk and the package.
DO NOT REMOVE THE LABELS FROM THE BED
Always use the recommended size mattress, mattress support, or both, to prevent
the likelihood of entrapment or falls
The top surface of the mattress must be at least 5 inches below the upper edge of
the guardrails
Weight Capacity on top bunk is 65kg
DO NOT allow horseplay on the bunk bed. Always PROHIBIT jumping on the bed
Children SHOULD BE discouraged from playing on the bunk bed
Periodically check and ensure that the guardrail, access device and other
components are maintained in the correct position and state of repair and that all
connectors are tight
DO NOT use any substitute parts. Contact the manufacturer or dealer for
replacement parts
STRANGULATION HAZARD - Never attach or hang items to any part of the bunk
that are not designed for use with the bed, but not limited to hooks, belts,
or jump ropes
Keep these instructions in a safe place for future reference
P.2
SAFETY PRECAUTION

P.3
EXPLODED VIEW
1 2
7
A B C D
E F G H
I J K
4
8 9
3
5
6
Left & Right Bed Metal Frame X 1pc
Upper Bed Base X 1pc
Bottom Bed Base X 2pcs
Back Safety Rail X 1pc
Bottom Side Rail X 2pcs
25mm x 50mm Rectangular
Plastic Connector X 8pcs
M8 X 110mm
JCBB Screw X 8pcs
M6 X 50mm
JCBC Screw X 11pcs
M6 X 25mm
JCBC Screw X 3pcs
50mm Round
Plastic Cap X 4pcs
50mm Round
Plastic Stopper X 4pcs
M6 X 12mm
JCN Nut X 14pcs
M6 X 40mm
JCBC Screw X 14pcs
19mm Ladder
Support Pipe X 3pcs
25mm Ladder
Pipe X 2pcs
Adjustable
Support Leg X 2pcs
M8 x 32 Metal
Square Nut X 8pcs
M5 Allen Key X 1pc M4 Allen Key X 2pcs
Front Safety Rail X 1pc

25mm x 50mm Rectangular
Plastic Connector X 8pcs
M8 X 110mm
JCBB Screw X 8pcs
50mm Round
Plastic Cap X 4pcs
50mm Round
Plastic Stopper X 4pcs
M8 x 32 Metal
Square Nut X 8pcs
M5 Allen Key X 1pc
A
F
G
H
I
J
P.4
ASSEMBLY INSTRUCTIONS
STEP 1:
Accessories
Insert Plastic Stoppers (I) into the bottom of
the Left and Right Bed Metal Frames (1),
and insert Round Plastic Caps (H) into the top
of the Frames (1).
Use Screws (A), Plastic Connectors (G),
and Metal Square Nuts (F) to secure the
Frames with Bottom Side Rails (5) and Upper
Bed Base(4).
H
1
1
I
11
5
5
4
F
5
G
A
1

M6 X 50mm
JCBC Screw X 4pcs
M6 X 40mm
JCBC Screw X 8pcs
M4 Allen Key X 2pcs
M6 X 12mm JCN Nut X 4pcs
B
C
E
K
P.5
ASSEMBLY INSTRUCTIONS
STEP 2:
Accessories
Insert Screws (C) into the Bottom Bed Base (6),
and secure the Bottom Bed Base with the
Bottom Side Rails (5).
Put the Adjustable Support Legs (9) under
the Bottom Bed Base, and
use Screws (B) and Nuts (E) to secure them.
C9
6
6
C
CC
C
C
BB
E
6
9

M6 X 50mm
JCBC Screw X 2pcs
M6 X 25mm
JCBC Screw X 2pcs
M6 X 12mm JCN Nut X 4pcs
M4 Allen Key X 2pcs
B
D
E
K
P.6
ASSEMBLY INSTRUCTIONS
STEP 3:
Accessories
Put Nuts (E) and Screws (B) through
the top of the Back Safety Rail (3);
and Nuts (E) and Screws (D) through the
bottom of the Back Safety Rails (3),
to secure the Back Safety Rails with the frames.
3
B
E
1
4E
D
3

M6 X 25mm
JCBC Screw X 1pcs
D
M6 X 12mm JCN Nut X 6pcs
E
M6 X 50mm
JCBC Screw X 5pcs
M6 X 40mm
JCBC Screw X 6pcs
B
C
M4 Allen Key X 2pcs
K
P.7
ASSEMBLY INSTRUCTIONS
STEP 4:
Accessories
Use Screws (B & D) and Nuts (E) to secure the
Front Safety Rail (2) with the Upper Bed Case.
Connect the Ladder Support Pipes (7)
and Ladder Pipes (8) with Screws (C).
Use Nuts (E) and Screws (B) to secure the
Ladder with the Upper and Lower Bed Base.
2
87
4
B
E
E
B
2
BB
CC
C
C
88
7
7
7
C
C
EE
2
4
E
E
1
D
B

Do NOT STEP, SIT or JUMP on the SIDE RAIL & METAL BASE.
IMPORTANT:
P.8
Complete
Maximum Height
for mattress