New Star Neomounts MED-M200 User manual

MED-M200
EN
NL
DE
FR
IT
ES
PT
DK
NO
SE
FI
PL
CS
SK
RO
Medical mount
Medische steun
Medizinische Halterung
Support médical
Supporto medico
Soporte médico
Suporte medico
Medicinsk beslag
Medisinsk feste
Medicinskt fäste
Medical teline
Uchwyt medyczny
Držák pro lékařské účely
Držiak na lekárske vybavenie
Suport medical
INSTRUCTION MANUAL
WWW.NEOMOUNTS.COM
830~1080
247 126460~710
498
221
435
420
537
430
597
89
444
Ø 100
410 198
187
95
120
70
487

(x2)
(x2)
4 mm (x1)
(x1)
PARTS
(x1)
INDEX
Parts p. 2
Features p. 3
Step 1-2-3 p. 4
Step 4-5-6 p. 5
Step 7-8 p. 6
Adjustment and operation p. 7
Safety notes p. 8
Maintainance p. 10
MED-M200
Screen size
VESA
Weight capacity
Tilt
Swivel
Rotate
Height
Depth
Gas spring
Curved screen compatible
Quick-release VESA
Top-x clamp
180° lock system
Handlebar
Crossbar
Cable management
Screen size
VESA
Weight capacity
Tilt
Swivel
Rotate
Height
Depth
Gas spring
Curved screen compatible
Quick-release VESA
Top-x clamp
180° lock system
Handlebar
Crossbar
Cable management
0-5 kg |
0-11 lbs
Screen size
VESA
Weight capacity
Tilt
Swivel
Rotate
Height
Depth
Gas spring
Curved screen compatible
Quick-release VESA
Top-x clamp
180° lock system
Handlebar
Crossbar
Cable management
Screen size
VESA
Weight capacity
Tilt
Swivel
Rotate
Height
Depth
Gas spring
Curved screen compatible
Quick-release VESA
Top-x clamp
180° lock system
Handlebar
Crossbar
Cable management
83-108 cm
(x1)
(x1)
5 mm (x1) (x3) (x1)
(x1)
(x2)
(x2)
(x2)
(x2)
(x4)
(x4)
(x4)
3 mm (x1)
2
FEATURES
1. Laptop compartment
2. Storage basket
3. Work surface
4. Lift brake release (release brake to raise or lower the cart)
5. Cable management
6. Sliding keyboard tray with mouse holder and sliding mouse tray (to accomodate both right and left hand users)
7. Casters (2 rear non-locking and 2 front locking)
8. Latch
9. Key and lock hole
10. Hanger for accessories
11. Track for accessories mounted
FEATURES
1
2
3
4
5
6
7
8
10
11
9
250mm 350mm
ADJUSTMENT DIRECTION
3

54
STEP 1
STEP 2
5mm
STEP 3
Latch
Lock
Open
Unlock the work surface
by turning the key
counterclockwise.
Push the latch backward
to lift the work surface.
Disamble the lid.
STEP 4 STEP 5
STEP 6
4mm
4mm
3mm
Use the screws to combine the top plate and the middle pilar.
or
Place the storage baskets on the side of the cart. Place the storage baskets at the back of the cart.
Use a 4mm Allen key to loosen the screws. Push the cooling
pad forward to take it out.

6
STEP 7
To avoid
ngers getting
caught/hurt,
please slide
the mouse tray
by using the
palm.
Direction of cable management and accessory assembly.
Holes for cable
management.
Storage for
cables and
adapters.
STEP 8
4mm
Put back the cooling pad and fasten the screws by using a
4mm Allen key.
Place the laptop in the compartment and place back the work
surface. Please notice the work surface must be locked and
the latch must be pushed forward before moving this cart.
Lock
Open
ADJUSTMENT AND OPERATION
Release brake to
adjust the height.
In case of cart damage, do not adjust the lift mechanism with an empty cart, since this may cause the work surface to
rise too quickly.
Notice:
Make sure to put a hand on both sides of the work surface while releasing the brake to higher or lower the work surface,
as shown in the gure. Do not push the center of the work surface to lower the height. When raising the work surface,
use two hands to slightly lift the surface if it remains motionless.
7
250mm

SAFETY NOTES
WARNING
Please notice that the latch must be pushed forward after placing back the work surface.
WARNING
When moving the cart over irregular surface or thresholds, please lift the cart from the bottom of the keyboard compartment, as shown in
the gure. Do not lift the cart from the handles.
WARNING
When the cart is in its place/not moving, make sure to put the brake on the two front casters.
WARNING
Make sure to put a hand on both sides of the work surface while releasing the brake to higher or lower the work surface, as shown in
the gure. Do not push the center of the work surface to lower the height. When raising the work surface, use two hands to slightly lift
the surface if it remains motionless.
Height adjustment
button
WARNING
Please do not apply pressure to the work surface, especially not in the center area, except when adjusting the height.
8 9

11
MAINTENANCE
All cart maintenance must be carried out at least once a month by a professional technician.
Cleaning warning
Because the cart is in the environment of electrical equipment, the usage of inammable cleansers are strictly forbidden.
1. Before cleaning the cart, please make sure the cart is unplugged from the mains and switched off.
2. Please ensure the cart is entirely dry before plugging the power into the socket.
3. While cleaning the cart, please use a damp cloth to wipe off the supercial cleansers until completely dry.
4. The cart is not to be used in a moist environment and liquids have to be avoided from running into the cart.
5. To avoid the nishing of the surface being damaged, do not use any abrasive materials for cleaning.
6. Before using any cleanser on the cart, please test them on a small part to see whether it affects the surface or not.
Please note that these guidelines give no guarantee whatsoever in terms of infection control. Kindly consult your medical infection
control specialist for cleaning advice.
Cleaning recommendations
1. Please use non-abrasive or diluted products such as soap water and diluted alcohol to clean the plastic components.
2. In case of spots of pen or maker on the cart’s surface, a soft cloth with 91% isopropyl alcohol is suggested for cleaning.
3. In cased of iodine spots on the cart’s surface, a soft cloth with soap water or diluted alcohol is suggested for cleaning.
The following chemicals are strictly forbidden for cleaning the cart: Abrasive cleansers, acetone , mineral spirits, point thinner or any
other harsh or toxic chemicals.
lnspections
All cart inspections must be carried out at least once a month by a professional technician.
In case of faults or damage occurring, stop operating the cart and contact your distributor for further assistance.
Casters
To allow the cart to move as intended, please inspect the casters regularly and keep the cart away from damaged and irregular surfaces.
Fasteners
lf fasteners/ screws become loose and need to be tightened, do not over-tighten them. Over-tightened fasteners/ screws might not only
cause damage to the screws but also to the components.
Troubleshooting
The cart is difcult to move
Ensure the two front locking casters are not locked. Check if any debris is sticking to casters and remove it.
The cart is difcult to adjust in height
Ensure the lift brake is pressed completely and lift the work surface slightly, to prevent the work surface to rise too quickly. lf the lift
mechanism still doesn’t work, please contact your distributor for further assistance. Also contact your distributor for assistance if the lift
mechanism keeps going up automatically.
10