NewLine EPR8A50500-SQR User manual
Assembly Parts
Please read the entire instruction manual before
you start installation and assembly. If you have
any questions regarding any of the instructions or
warnings, please contact your local distributor for
assistance.
Mobile Stand Assembly
CAUTION: Use with products heavier than the
rated weights indicated may result in instability
causing possible injury.
• Mounts must be attached as specied in
assembly instructions, improper installation may
result in damage or serious personal injury.
• Safety gear and proper tools must be used.
This product should only be installed by
professionals.
• Make sure that the supporting surface will safely
support the combined weight of the equipment
and all attached hardware and components.
• Use the mounting screws provided and DO NOT
OVER TIGHTEN mounting screws.
• This product contains small items that could be
a choking hazard if swallowed. Keep these items
away from children.
• This product is intended for indoor use only.
Using this product outdoors could lead to
product failure and personal injury.
IMPORTANT: Ensure that you have received all
parts according to the component checklist prior
to installation. If any parts are missing or faulty,
telephone your local distributor for a replacement.
MAINTENANCE: Check that the bracket is secure
and safe to use at regular intervals (at least every 3
months).
Mobile Stand Assembly
Step One
Step Two
Step Three
Each caster can be adjusted independently for ne tuning Slightly turn the nut to lower or raise the base.
Mobile Stand Assembly
Step Four
Step Five
Step Six
Other NewLine Rack & Stand manuals
