Newnex FireNEX-uLINK-DS User manual

FireNEX-uLINK-DSTM
User’s Manual
Table of Contents
1.0 Introduction
2.0 Package Contents
3.0 System Requirements
4.0 Specifications
5.0 Features
6.0 Using the FireNEX-uLINK-DSTM
7.0 Frequently Asked Questions
8.0 Return Policy
www.newnex.com

1.0 Introduction
Congratulate on your purchase of Newnex FireNEX-uLINK-
DSTM USB 3.0 active repeater dongle. The FireNEX-uLINK-
DSTM is capable of transmitting USB 3.0 SuperSpeed signals
(5Gbps) up to 10 meters, with a maximum of 5 meters in cable
length each side.
2.0 Package Contents
•One FireNEX-uLINK-DSTM USB 3.0 active repeater
dongle
•One user’s manual
•USB 3.0 cables for the FireNEX- uLINK-DSTM could
be ordered separately from Newnex.
3.0 System Requirements
•Computer with a USB 3.0 port or/and controller card
installed
4.0 Specifications
•Dimensions: 25.4mm x 28.5mm x 47.3mm
•Weight: 48g
•Power Input: 5V - Bus Powered
•Data Rate: Up to 5 Gbps
•RoHS compliant

5.0 FireNEX-uLINK-DS™ Features
•SuperSpeed USB 3.0 at 5 Gbps supported
•USB 2.0 backward compatible
•Bus Powered
•USB3 Vision compliant locking
•Compact size
•Plug and Play
6.0 Using the FireNEX-uLINK-DSTM
It is important to follow the installation procedure for your
FireNEX-uLINK-DSTM:
1. Connect a high quality USB A male to B male cable from the
host computer to the B-receptacle end of the unit, with a
length up to 5 meters.
2. Connect device with one USB cable to the A-receptacle end
of the unit, which ups to 5 meters.

7.0 Frequently Asked Questions
1. What is the maximum length that the FireNEX-
uLINK-DSTM can support?
Up to 10 meters, 5 meters on each side.
2. What is the maximum speed of the FireNEX-
uLINK-DSTM ?
FireNEX-uLINK-DSTM can support data transfer speed
up to 5 Gbps as specified by USB 3.0 standard.
3. Will it work with USB 2.0 or older version of USB
technology?
Yes. FireNEX-uLINK-DSTM is back ward compatible
with USB 2.0 standard.
4. Is there a driver for the FireNEX- uLINK-DSTM ?
No, the FireNEX-uLINK-DSTM does not require any
drivers, it is Plug and Play.

8.0 Return Policy
Warranty: FIRENEX warranty is valid for one year from the
invoice date.
FOR PRODUCTS UNDER WARRANTY
RMA for Purchases Directly from Newnex:
1) Please call [phone] or e-mail to
[email protected] to obtain RMA#. RMA# is valid for
15 days from issuing date.
2) Please send photos for showing serial numbers and
warranty seals to [email protected].
Note: If the warranty seal on the product is broken, the
warranty will be void.
3) Please include RMA number on all return packages.
Notes:
a. Packages that do not have a RMA number will be
rejected.
b. Repair service normally takes 2-3 weeks.

4) After Newnex receives your returned RMA products and
test them, either of the following action would be taken:
a. If the products are defective, Newnex will send you the
replacement parts.
b. If the returned products are not defective, Newnex will
return back to you. You are responsible for round trip
shipping costs and $50 checking and evaluation fee.
5) For replacement requests before Newnex receives your
returned RMA products:
a. Your replacement order will be treated as a new order
which will include parts and shipping costs. You are
responsible to pay for replacement invoices.

This page is intentionally left blank

Newnex Technology Corp.
3041 Olcott St.
Santa Clara, CA 95054, USA Tel. #: [phone]
Fax #: [phone]
For Technical Assistance: [email protected]m
www.newnex.com