Newport 8203 User manual
INSTALLATION INSTRUCTIONS
SINGLE HOLE LAVATORY FAUCET
MODEL No: 8203
Congratulations on the purchase of
your Newport product, an excellent
choice, that will give you years of
quality service and enhance the
look and style of your home.
Recommended Installation by a Professional Plumbing Contractor
Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We
recommend the use of clear silicone sealing materials. Recommended deck thru hole Ø 1.375”
1. Insert hoses through deck hole one at a time and secure spout into place with MOUNTING
STUD (1), MOUNTING BRACKING (2), and MOUNTING NUT (3). See Figure 1.
2. Attach hot/cold water supply hoses to valves in the wall. See Figure 2.
3. With the faucet handle in the OFF position, turn on the wall valves and check for leak.
4. Remove the AERATOR ASSEMBLY (4) and open the faucet handle to flush out any debris.
5. Re-install the AERATOR ASSEMBLY (4).
Figure 1
Figure 2
1
2
3
3/8” COMPRESSION
OUTLET
9/16-24 UNEF
(FOR 3/8”
COMPRESSION
OUTLET
4
NWP-8203
2001 CARNEGIE AVE, SANTAANA CA 92705 02/01/18
Rev NC (949) 417-5207 EN-3528
WWW.NEWPORTBRASS.COM
Table of contents
