NexDigitron A3 User manual

Package Contents
Hard Wire Cable, 6 Pieces Fuse Tap (3 sizes, 2 each),
QR Codefor User Guide
Manufactured By
NEX DIGITRONIX LLP, Hinjewadi, Pune, MH, INDIA
Customer Care
Whatsapp/Call: 7737373626
[e-mail]
HARDWIRE KIT FOR A3 DASHCAM
User Guide

Three Recording Modes in Parking
There are three types of video recording modes -
Time-Lapse Video (1 FPS Continuous), Ordinary Video (30
FPS Continuous) & Dormancy (Record Events Only). After
car is parked, the duration of video recording can also be
selected through the app (15min, 1hour, 6hour & 24hour)

The parking mode is controlled by power in ACC Wire. Once
car is parked and there is no power in ACC Red Wire, the
dashcam will enter parking mode and record video as per
the setting selected by you in the app. Once you start the car,
the dashcam will detect power in ACC Wire and exit parking
mode
ACC Triggered Parking Mode

For vehicle battery discharge protection, it has an intelligent
SAFE GUARD function that automatically shuts down
dashcam when the voltage falls below preset level. User
can select between three protection levels through the app
- HIGH (12.4V), MEDIUM (12V) or LOW (11.8V). A fully charged
car battery has a voltage of 12.8V or more.
Low Battery Protection Function

For connecting hardwire, you need to located the fuse box
present inside the cabin of your car. The above arrows
shows the location of cabin fuse box found in different car
models available in India.
Locate Your Car's Cabin Fuse Box

Identify VCC fuse - 12V power is supplied even when the
vehicle is turned off or the ignition key is off. Identify ACC
fuse - 12V DC power is not supplied when the vehicle is
turned off or the ignition key is off, 12V DC output when the
vehicle is on or the ignition key is on
Identify ACC & VCC Fuses

Using fuse puller or pliers, remove the identified ACC & VCC
fuse from the fuse box and keep them aside for next steps.
You can WhatsApp the Fuse Box Diagram to NEXDIGITRON
Customer Support for fuse markings if you are unable to
identify them.
Pull out the ACC & VCC Fuses

Your car will have one of the three fuse types available in
India - Mini, Low profile Mini or Micro2. You will need to
select the fuse adapter which matches your car fuse.
Please note colors of fuse adapters may vary between red
and yellow as per availability.
Match the ACC & VCC Fuse with Fuse Adapter

Now insert the fuse which your had removed from your car
into the fuse adapter as per above image. Please insert fully
into the fuse adapter, it could take some effort to push it fully
inside. Please insert fuses exactly as per above image.
Insert the ACC & VCC Fuse in the Fuse Adapter

Peel off the red & yellow wire of the hardwire kit, fold it and
insert in the blue terminal of the fuse adapter. Press the
terminal with pliers as per above image so that the wire is
firmly secured with the fuse adapter.
Join the Wires with Fuse Adapter

Now insert the fuse adapters into the fuse box slots from
where you had removed the VCC & ACC fuses. Press firmly
so that its completely inside and secured well.
Insert the Fuse Adapter in Fuse Box

The back wire of the hardwire needs to be directly connect-
ed to car body metal point like screw/nut which is unpaint-
ed. This is present inside the sideway plastic trims. DO NOT
CONNECT to other wires or nuts/screws on plastic parts as
it will not work properly.
Connect Black Wire to Car Body

Connect the port of the hardwire kit to the dashcam and
tuck in the wires inside your car trims. When correctly
connected, the dashcam shutdown music will change when
set to record in time lapse mode. If you face any issues,
please contact NEXDIGITRON Customer Support through
WhatsApp.
Connect the Hardwire to Dashcam