Nexel 245644 User manual

1MODEL #
User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
Models: 245644, 245645, 245646, 245647
CANTILEVER RACK SHELVING
72"36", 48", 60"
Using M8x20 bolts, fasten the two or three pieces of the 3
stringers together according to the images above and the desired
dimension of the rack.
Thread 4 feet through the threaded holes on the bottom of
each upright piece.
Using M8x20 bolts
and washers, fasten
the 3 stringers to
the support bars of
the uprights.
Slide the arms
down the uprights
and set them at the
desired height for
racking.
Using M10x100
bolts and washers,
secure the arms to
the upright of the
rack.
CAPACITIES
36"x24" : 880LBS
48"x24" : 660LBS
60"x24" : 660LBS
72"x24" : 660LBS
DO NOT OVERLOAD

2
Cantilever Rack Shelving User Manual
Holding the bars
upright, install the
sway x-bars so
that the bars are
not under tension
or compression.
The holes will vary
depending on width
setting of the unit.
Secure each of the 2
x-bars in at the ends
using M10x100 bolts
and in the middle
using M10x20 bolts.
For larger widths,
use added X-bar
extensions.
(optional)
Using knobs
included with rack,
slide Nexel ® Wire
Racks over the
knobs until the rest
on the arms of the
rack. Install caps
on top of knobs.
Warning
M10x20
M10x100