Next Retail PARIS 147013 User manual

Tools Needed
Helpline
If you have any problems with this product or
require any replacement fittings please contact
Customer Services Tel: [phone]
•
Made in China.
•Regular cleaning is essential to avoid build up of these products on the surface.
•Care should be taken to avoid spilling anything on the upholstery. If a spillage occurs act promptly and soak up
any liquids by blotting with a clean absorbent cloth. Never rub to remove stains. Never use a wet cloth.
•Avoid exposure to direct or prolonged periods of sunlight and position away from direct heat sources such as
radiators.
•If a spillage does occur, blot any liquids immediately with a clean, dry absorbent cloth and allow to dry naturally.
•Hair products such as hairsprays, oils and gels may affect the finish. Avoid prolonged contactwith such
products.
•Clean periodicallyin situ using a professional cleaning company.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
•The headboard is suitable for domestic use only.
CARE INSTRUCTIONS
•All assembly fixings should always be tightened properly and periodically check all fixings and tighten if
necessary.
•For more stubborn stains a professional upholstery cleaner should be consulted.
•Made with 100% polyester, nelson mink fabric covering.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
PRODUCTINFORMATION
IMPORTANT
•We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
•Carefully check that you have all the parts before beginning assembly.
•We recommend that the packaging is used to protect the surfaces during assembly.
•A minimum of 2 personsis required to assemble this product.
•Keep fittings out of children’s reach and keep children well away from construction area.
•Foam is supplied to protect the front face. Do use the foam to protect the main face during assembly.
PARIS HEADBOARD MINK 147013
Page 1 of 2

Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP ONE
FITTINGS
1. Screw 2 x legs 2 to headboard 1 using 6 x bolts
(A), 6 x flat washers (C) and 6 x spring washers (B).
Tighten with Allen key (D).
PARTS
A x 6 B x 6 C x 6 D x 1
D
A
B
C
2
1
2 x 21 x 1
Page 2 of 2