Nexx ALL-O-MATIC NXG-300 Programming manual

NEXX NXG-300 Quick Start Instructions
BEFORE INSTALLATION
Make sure you have the Wi-Fi network and password
before starting.
A video tutorial of the installation process can be found at
https://getnexx.com/products/nexx-smart-wi-fi-garage-door-
controller-nxg-300
WHAT COMES IN THE BOX
SET UP AND INSTALLATION
Make sure you are close to the router and have a strong Wi-Fi signal
for the device to work properly.
to download the app can be found in the manual included in the box.
Open the NEXX HOME app and create an account.
Connect power supply to the NEXX device.
Once you have a steady ORANGE ACTIVITY light, log in to the NEXX
add a device.
Follow the prompts on the screen to configure the account and
complete the set-up process.

CONNECTING THE NEXX DEVICE TO THE GATE OPERATOR
You will need to identify which limit switch is the close limit. The
on the board.
Connect the
the back of the device. Please note polarity does matter when
connecting the wires to the board.
You will find a sticker identifying which wire from the device connects
to what terminal on the operator circuit board. Please see pictures
below.
Please call All-O-Matic Tech Support at [phone] with any questions.
Tech Support is available Monday-Friday from 7:00 am to 3:30 pm.