Nexxt Solutions NHB-S710 User manual

WARRANTY
nexxtsolutions.com/warranty
YEAR
2
Smart Wi-Fi LED
floor lamp

C
M
Product overview
1. Self-adhesive LED light strip: displays various lighting
colors according to your preferred settings through the
application
2. Lamp pole
3. Base
4. Acrylic lamp shade
5. 5-pin data cable
6. Controller
7. AC adapter
English
User guide
Thank you for purchasing the Smart Wi-Fi LED oor lamp
from Nexxt Solutions. We are excited to be part of making
your life easier, safer and bringing peace of mind into your
homes.
Package content
5-foot LED strip (1)
Power adapter (1)
Smart controller (1)
Lamp assembly kit:
Aluminum alloy tubes (4)
Acrylic lamp covers (4)
Square tubes (feet) (2)
Mounting base (1)
3/32 (2mm) Allen wrench (1)
Spare mounting screws (2)
Top cover (1)
User guide (1)
1
2
3 5
4
67

Preliminary steps
Floor lamp assembly
Step 1.
Open the box and make sure no parts are damaged or missing.
1. Fit the four grooved metal tubes together, matching
male with female connectors.
2. Next, unroll the LED strip and insert the end through the
slot on the ring attached at the bottom of the tube, as
shown in the image below. Then, gently extend the LED
strip along the length of the canal.
Note: This RGBIC LED strip is controlled by a single
IC chip and cannot be cut. Doing so will
compromise the functioning of the LEDs.
3. Remove the blue 3M protector from the back section of
the LED strip. Then, carefully stick the LED strip along the
canal following a straight line from top to bottom. The
area must be dry and even to ensure maximum grip.
1
2
3
4
12V
G
R
B
+
12V
G
R
B
+

4. Proceed to install the four white lampshades onto the
tube, starting at the bottom section. Fit each of them in
the rails on the edges of the canal by gently pressing
down until they click into place.
5. Attach the top cover to secure the tube assembly, as
shown below.
Top cover
Note: If the length of the LED
strip matches the total length
of the canal, it means it has
been placed correctly.
Note: For seamless light
output, make sure each
lampshade completely
overlays a section of the tube
from one joint to the next,
avoiding any gaps between
them.
12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+12V
G
R
B
+
Soft ligth strip

8. Connect the female 5-way connector to the male 5-pin
at connector on the controller, making sure to match
the direction arrows on both ends.
Note: This lamp is originally intended to be placed in a
corner of the room facing the wall, radiating a diused
glow around it, and creating dierent“light painting”
atmospheres to decorate your space or match dierent
moods and occasions. It has not been designed to
substitute for the regular lights in your room.
7. Attach the lamp’s feet (square tubes) to the base and
screw them tight using the Allen wrench. Now you can
place the lamp upright on the oor.
6. Carefully place the tube on its side. Screw the mounting
base into the bottom of the tube, until the feet connectors
end up on the side opposite the lampshades. Make sure the
cable goes through the orice on the bottom ring.

C
M
9. Connect the controller to the power adapter and plug it
into a wall outlet. The LED strip will automatically turn on.
Immediately after, the lights will start blinking in red to
indicate the device has entered pairing mode. Otherwise,
press the power button on the controller for 8 seconds to
turn on the device manually.
10. Pair the lamp using the Nexxt Home App.
Controller buttons
On/O button: Briey press to turn the strip lights on or
o. Press and hold for 8 seconds to start Wi-Fi pairing
Color button: Press it to cycle through eight dierent
lighting eects.
Music button: Allows the selection among six dierent
music synchronization modes

Installing the Nexxt Home App
Download Nexxt Home app from Google Play or Apple App
Store.
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
GET
Accvent LLC
Login with existing account
Create New Account
SOLUTIONS
Iniciarsesión con cuenta existente
Crear Cuenta Nueva
SOLUTIONS
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
INSTALL
Accvent LLC
Step 1
Register by email. Fill in the required elds.
60 %
9:41 AM
Register by email
United States of America
Email
Get authentication code

Step 3
Create a new password and then select Completed.
60 %
9:41 AM
Set Password
Completed
6-20 characters, including letters and numbers
Step 2
Enter the verication code you received.
60 %
9:41 AM
Enter verication code
Verication code has been sent to your

Step 4
The Nexxt Home account has been successfully congured.
Add device
Step 1
Select Add device and then click on the blue +button.
However, if the device is not recognized automatically,
select the Smart oor lamp icon from the list and continue
to next step.
60 %
9:41 AM
60 %
9:41 AM
60 %
9:41 AM

Step 3
Once the Floor lamp is detected by the application, the
notication Device added successfully will be displayed on
the screen.
Click on the pencil if you want to change the icon and the
name of the device, and also assign a dierent location. You
can choose to do it now or later through the Settings
interface. Select Done to save your settings and go back to
the main interface. The device is now ready to be used.
Step 2
Verify that the smart oor lamp is powered on. You must
connect to a 2.4GHz Wi-Fi network. Enter your network
password. Ensure to use the correct password, otherwise
the device will not connect.
60 %
9:41 AM
60 %
9:41 AM
60 %
9:41 AM

Main interface
Color illumination mode: choose the color and
saturation of the LED lights. The brightness level can be
adjusted on a scale from 0 to 100%.
Color illumination mode: customize each of the 20
segments to any color you like on a single string
simultaneously.
Segmented color control: customize each of the 20
segments to any color you like on a single string
simultaneously.
Diuser: creates a transition eect for a smoother light
color display.
60 %
9:41 AM

White: changes the temperature of the light from warm to
the cool white. The brightness level can be adjusted on a
scale from 0 to 100%.
60 %
9:41 AM
Color card: provides access to a polychromatic palette with
55 dierent colors to choose from.
60 %
9:41 AM

Combination: select any of the preset color circles to
quicky choose an illumination eect with dierent
segmentation patterns.
60 %
9:41 AM
Scenes: set the mood with 44 preset lighting scenes or
create your own mix of dierent colored and white lights.
60 %
9:41 AM

Music mode: provides a selection of 6 dierent dynamic
lighting options that sync to the rhythm of your music.
60 %
9:41 AM
Plan: this menu provides access to two submenus:
Countdown and Schedule.
60 %
9:41 AM
60 %
9:41 AM

Countdown: sets up a given amount of time to cause the
device to tun on or o.
60 %
9:41 AM
Timing: allows users to program a schedule for the device
to turn on or o.
60 %
9:41 AM

Settings
Click on the pencil icon on the upper right-hand corner.
Device information: displays detailed
information related to the oor lamp.
Device name: changes the icon and the
name of the device, and it also allows the
user to assign a dierent location.
Tap-To-Run and Automation: links the
Wi-Fi oor lamp with other smart products
to automatically control them through a
customized command.
Third-party control: enables the voice
recognition feature through Alexa and
Google Assistant.
Share device: allows sharing the Wi-Fi
oor lamp with family and friends.
Create group: makes management of devices easier by selecting and
arranging multiple components under a single group.
Location information: allows access to the device's location, which
is used used for action or scene segmentation within the home.
Feedback: let us know if you have any issues setting up the product.
60 %
9:41 AM
Add home screen: adds a shortcut of the device to the main screen
on your phone.
Device update: we will sometimes add new features or provide
updates with a new rmware upgrade.
Remove device: allows you to unbind the device from the Nexxt
Home Account.

Share device
Click on Share devices then tap Add sharing. Enter the
e-mail address of family and friends. Tap on Done. The
newly congured users will now have access to your smart
oor lamp.
Note: family or friends will need their own Nexxt Solutions
Home Account to access the device.
Delete user
To remove a user, on Android press and hold the name you
want to eliminate. On iOs slide to the left the user you want
to remove. Click on Delete. A notication conrming you
don’t want to share the device with this user will be
displayed. Click on Conrm.
Nexxt Solutions® is a registered trademark. All rights reserved.
Amazon, Alexa and all related logos are trademarks of Amazon.com,
Inc. or its aliates. Google, Google Home, Android y Google Play are
trademarks of Google LLC. All other brand names and trademarks are
the property of their respective owners. Made in China.
FCC ID: X4YHABS710

C
M
Español
Descripción del producto
1. Cinta de luces LED autoadhesiva Exhibe diversos colores
de iluminación conforme a la conguración seleccionada
a través de la aplicación
2. Poste de la lámpara
3. Base
4. Pantalla acrílica para lámpara
5. Cable para datos de 5 alleres
6. Controlador
7. Adaptador de corriente
Guía del usuario
Gracias por adquirir la Lámpara LED inteligente de piso
con conexión Wi-Fi de Nexxt Solutions. Nos complace ser
parte de la solución destinada no sólo a simplicar su vida,
sino que además poder brindar más seguridad y
tranquilidad al interior de su hogar.
Contenido del empaque
Cinta LED de 1,5m (1)
Adaptador de corriente (1)
Controlador inteligente (1)
Kit de ensamblaje de la lámpara:
Tubos metálicos con acanaladura (4)
Pantallas acrílicas para lámpara (4)
Tubos cuadrados (patas) (2)
Base de montaje (1)
Llave Allen de 3/32 (2mm) (1)
Tornillos adicionales (2)
Tapa del extremo superior (1)
Guía del usuario (1)
1
2
3 5
4
67

2. Luego, desenrolla la tira de LED e inserta el extremo a
través de la ranura en el anillo acoplado a la parte inferior
del tubo, como se muestra en la imagen a continuación.
Luego, extiende suavemente la tira de LED a lo largo del
canal.
Nota: Esta tira LED RGBIC está controlada por un
solo chip IC y no se puede cortar. Si lo haces,
comprometerás el funcionamiento de los LED.
3. Retira el protector azul 3M de la parte posterior de la tira
LED. Luego, ja con cuidado la tira LED a lo largo del canal
siguiendo una línea recta de arriba a abajo. El área debe estar
seca y bien nivelada para garantizar la máxima sujeción.
Pasos preliminares
Montaje de la lámpara de piso.
Paso 1.
Al abrir el empaque, verique la condición y cantidad de las
piezas mencionadas en la lista.
1.Acopla los cuatro tubos metálicos ranurados,
empalmando sus uniones macho con hembra
1
2
3
4
12V
G
R
B
+
12V
G
R
B
+

Nota: Si la longitud de la tira
LED coincide con la longitud
total del canal en el tubo,
signica que la has colocado
correctamente.
Nota: Para obtener una salida de
luz uniforme, asegúrate de que
cada pantalla cubra
completamente una sección del
tubo, evitando espacios entre
ellas.
12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+
12V
G
R
B
+12V
G
R
B
+
Cinta LED
4. Procede a instalar las cuatro pantallas blancas en el tubo,
comenzando por la parte inferior. Ajusta cada una de ellas
en los rieles de los bordes del canal, presionando
suavemente hacia abajo hasta que encajen en su lugar.
5. Coloca la tapa del extremo superior para asegurar el
ensamblado del tubo, como se muestra a continuación.
Tapa superior