NI WSN-3202 User manual

USER GUIDE AND SPECIFICATIONS
NI WSN-3202
NI Wireless Sensor Network 4-Channel, 16-Bit Analog Input Node
This user guide describes how to use the NI WSN-3202 analog input node and lists its specifications.
Figure 1 shows the NI WSN system components.
Figure 1. NI WSN System Components
The NI WSN-3202 is a four-channel, low-power, wireless voltage input device that works with other
NI WSN-32xx nodes and gateways to form a wireless sensor network. The NI WSN system consists of
one or more NI WSN gateways, up to 36 NI WSN-32xx nodes per gateway, and multiple PCs or
Programmable Automation Controllers (PACs) to receive and analyze the distributed sensor data. For
more information about PACs, visit ni.com.
1NIWSN-32 xx Nodes
2 NI 9792 WSN Real-Time Gateway
3 NI WSN-9791 Ethernet Gateway
4 PC Running NI Software
4
2
1
1
3
Or

NI WSN-3202 User Guide and Specifications 2ni.com
When you connect the NI WSN gateway, you can use a separate host PC running Windows, or a PAC
running NI LabVIEW Real-Time, to display measurement results, status information, and to change the
NI WSN gateway and NI WSN-3202 device settings. Figure 2 shows the NI WSN-3202 device block
diagram.
Figure 2. NI WSN-3202 Block Diagram
DIO
Circuitry
Analog
Front End
Flash
Antenna
2.4 GHz
802.15.4
Radio
Power Supply
and Selector
Low-Power
Microcontroller
18-Position
Combicon
Connector
External Power
Input
Battery Input
(Internal)

©National Instruments Corporation 3 NI WSN-3202 User Guide and Specifications
Dimensions
Figure 3 shows the NI WSN-3202 device dimensions.
Figure 3. NI WSN-3202 Device Dimensions
Safety Guidelines
Operate the NI WSN-3202 device only as described in this user guide.
Hot Surface This icon denotes that the component may be hot. Touching this component may result
in bodily injury.
NI WSN Safety Information
The following section contains important safety information that you must follow when installing and
using NI WSN products.
Caution Do not operate the NI WSN product in a manner not specified in the user manual or
operating instructions. Product misuse can result in a hazard. You can compromise the safety
protection built into the product if the product is damaged in any way. If the product is damaged,
return it to National Instruments for repair.
Caution Do not substitute parts or modify the NI WSN product. Use the product only with the
devices, accessories, and cables specified in the installation instructions.
124 mm
(4.88 in.)
86.4 mm
(3.40 in.) 42.4 mm
(1.67 in.) 50.8 mm
(2.00 in.)
55.9 mm
(2.20 in.)
235 mm
(9.25 in.)
25.0 mm
(1.00 in.)

NI WSN-3202 User Guide and Specifications 4ni.com
Caution Do not operate NI WSN products in an explosive atmosphere or where there may be
flammable gases or fumes.
Caution If you need to clean a NI WSN product, wipe it with a dry towel. The product must be
completely dry and free from contaminants before you return it to service.
Caution Operate the product indoors only at or below Pollution Degree 2. Pollution is foreign matter
in a solid, liquid, or gaseous state that can reduce dielectric strength or surface resistivity.
Caution Yo u must insulate signal connections for the maximum voltage for which the NI WSN
product is rated. Do not exceed the maximum ratings for the product. Do not install wiring while the
product is live with electrical signals. Do not remove or add connector blocks when power is
connected to the NI WSN system. Avoid contact between your body and the connector block signal
wiring when hot-swapping devices.
Caution To comply with safety regulations, use only recommended batteries with this product.
Refer to the Battery Power section for the recommended battery types.
Safety Guidelines for Hazardous Locations
The NI WSN-3202 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations;
Class I, Zone 2, AEx nC IIC T4 and Ex nL IIC T4 hazardous locations; and nonhazardous locations
only. Follow these guidelines if you are installing the NI WSN-3202 in a potentially explosive
environment. Not following these guidelines may result in serious injury or death.
Caution Observe the battery manufacturers’ operating temperature ratings listed in the Battery
operating temperature range specification section.
Caution Do not disconnect the power supply wires and connectors from the device unless power has
been switched off.
Caution Do not install or remove the device unless power has been switched off.
Caution Substitution of components may impair suitability for Class I, Division 2.
Caution For Zone 2 applications, install the WSN system in an enclosure rated to at least IP 54 as
defined by IEC 60529 and EN 60529.
Special Conditions for Hazardous Locations Use in Europe
The NI WSN-3202 has been evaluated as Ex nA nL IIC T4 equipment under DEMKO Certificate
No. 07 ATEX 0626664X. Each device is marked II 3G and is suitable for use in Zone 2 hazardous
locations, in ambient temperatures of –40 °C Ta 70 °C.

©National Instruments Corporation 5 NI WSN-3202 User Guide and Specifications
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for electromagnetic
compatibility (EMC) as stated in the product specifications. These requirements and limits are designed
to provide reasonable protection against harmful interference when the product is operated in its
intended operational electromagnetic environment.
This product is intended for use in industrial locations. There is no guarantee that harmful interference
will not occur in a particular installation, when the product is connected to a test object, or if the product
is used in residential areas. To minimize the potential for the product to cause interference to radio and
television reception or to experience unacceptable performance degradation, install and use this product
in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
The following statements contain important EMC information needed before installing and using this
product:
Caution To ensure the specified EMC performance, product installation requires either special
considerations or user-installed, add-on devices. See the product installation instructions for further
information.
Caution To ensure the specified EMC performance, operate this product only with shielded cables
and accessories.
Caution This product may become more sensitive to electromagnetic disturbances in the operational
environment when test leads are attached or when connected to a test object.
Related Documentation
Check ni.com/manuals for the most recent documentation. For a complete list of documentation
related to the NI WSN system, refer to ni.com/info and enter rdwsnrd.
In addition to this guide, the following documents may be useful when configuring your NI WSN
system:
• NI Wireless Sensor Network Getting Started Guide
• NI WSN-9791 Ethernet Gateway User Guide and Specifications
• NI 9792 WSN Real-Time Gateway User Guide and Specifications
•Configuring WSN in MAX, available from Start»All Programs»National Instruments»NI-WSN
•LabVIEW Help for WSN Devices, available in LabVIEW from Help»LV Help»WSN Devices
Help
•NI-WSN Readme, available on the software installation disc included with your gateway
Training Courses
If you need more help getting started developing an application with NI products, NI offers training
courses. To enroll in a course or obtain a detailed course outline, refer to ni.com/training.
Technical Support on the Web
For additional support, refer to ni.com/support or zone.ni.com.

NI WSN-3202 User Guide and Specifications 6ni.com
Software Overview
Note Refer to the NI WSN Readme, available on the software installation disc included with your
device, for NI software application version support.
The NI-WSN software includes NI Measurement & Automation Explorer (MAX) as well as server and
driver software for easy integration into application software packages. These software components
manage the low-level communications and hardware configurations, simplifying programmatic access
to I/O channels. The NI-WSN software is on the software installation disc included with your NI WSN
gateway device. The NI-WSN software is supported by Windows 7/Vista/XP and contains the following
components:
•NIMAX
• NI-WSN
You can download a current version of NI-WSN software from ni.com/support. Using your Web
browser, go to ni.com/support and select Drivers and Updates»Distributed I/O»Wireless Sensor
Networks, and then select the latest version of NI-WSN software. If you are using other software, refer
to the installation instructions that accompany your software.
What You Need to Get Started
To set up and use NI LabVIEW with the NI WSN-3202 device, you need the following:
• NI WSN gateway
•NIWSN32xx devices with a 9–30 V power supply or four AA 1.5 V alkaline batteries for each
node. Refer to the Battery Power section for recommended batteries.
• Mounting hardware (DIN rail, panel-mount, or rack mount accessory)
• Ethernet cable/connection
• 1/8 in. flathead and number 2 Phillips screwdrivers
• NI-WSN software version 1.0 or later
• Host PC running Windows 7/Vista/XP
• NI LabVIEW 8.6.1 (32-bit) or later
•(NI 9792 WSN Real-Time Gateway Only) NI LabVIEW 2009 SP1 (32-bit) Real-Time Module or later
• Related hardware and software documentation
Unpack the Device and Install the Antenna
Remove the device from the package and inspect the device. Contact NI if the device appears damaged.
Do not install a damaged device.
Caution The device is static sensitive. Always properly ground yourself and the equipment when
handling or connecting to the device.
To attach the antenna, align the antenna with the mount and screw it on as shown in Figure 4.
Caution The antenna must be attached to the NI WSN devices in order for the NI WSN devices to
function correctly.

©National Instruments Corporation 7 NI WSN-3202 User Guide and Specifications
Figure 4. Attach the Antenna to the Device
Mounting the NI WSN-3202 Device
You can mount the NI WSN-3202 on a panel or on a 35 mm DIN rail. For kit accessory ordering
information, refer to the NI WSN product page accessory section at ni.com. Before using any of these
mounting methods, remove and save the serial number sticker located on the back of the NI WSN-3202
device for future use when configuring your device in software. For the NI WSN-3202 device
dimensions, refer to Figure 3.
Caution Your installation must allow 50.8 mm (2 in.) of clearance in front of devices for common
connector cabling, such as the 18-terminal detachable screw terminal connector.
Attaching the NI WSN-3282 DIN Rail (Optional)
You can mount the NI WSN-3202 on a standard 35 mm DIN rail using a NI WSN-3282 DIN rail clip,
NI part number 781074-01. Complete the following steps to mount the NI WSN-3202 on a DIN rail:
Caution Power off the device before mounting it to the DIN rail.
Note Use thread-forming screws to permanently affix the DIN rail clip to the device. Unscrewing
and reinstalling the thread-forming screws will produce a compromised connection between the DIN
rail clip and the device.
1. Fasten the DIN rail clip to the NI WSN-3202 using a number 2 Phillips screwdriver and the
four 8-32 5/16 in. thread-forming screws that shipped with the DIN rail clip. Figure 5 shows how
to fasten the DIN rail clip to the NI WSN-3202.
Caution Do not use screws longer than 5/16 in. to fasten the DIN rail clip to the NI WSN-3202.
NATIONAL
INSTRUMENTS
NATIONAL
INSTRUMENTS

NI WSN-3202 User Guide and Specifications 8ni.com
Figure 5. NI WSN-3202 Device DIN Rail Installation
2. Insert one edge of the DIN rail into the deeper opening of the DIN rail clip, as shown in Figure 6.
Figure 6. DIN Rail Clip Installation
3. Press down firmly on the NI WSN-3202 to compress the spring until the clip locks into place on
the DIN rail.
1 DIN Rail Clip (without Device) 2 DIN Rail
2
1

©National Instruments Corporation 9 NI WSN-3202 User Guide and Specifications
Using a Panel Mount Accessory
The NI WSN-3280/3281 panel mount accessories, part numbers 780999-01 and 781073-01, each
include a retention clip and knob and integrated strain relief for power and I/O wires. You can use the
NI WSN-3280 panel mount accessory to attach the NI WSN-3202 device to a panel or other flat surface.
The NI WSN-3281 panel mount accessory also includes a magnetic mount for attaching the
NI WSN-3202 device to metallic surfaces. Figure 7 shows the NI WSN-3202 panel mounting
dimensions.
Figure 7. NI WSN-3202 Device Panel Mount Dimensions
78.74 mm
(3.100 in.)
4.50 mm
(5× Ø.177 in.)
44.02 mm
(1.733 in.)
183.79 mm
(7.236 in.)
55.88 mm
(2.200 in.)
13.97 mm
(0.550 in.)
25.40 mm
(1.000 in.)
25.40 mm
(1.000 in.)
53.34 mm
(2.100 in.)

NI WSN-3202 User Guide and Specifications 10 ni.com
Figure 8. Panel Mount Accessory
Refer to Figure 8 while completing the following steps to mount the NI WSN-3202 on a panel:
1. (NI WSN-3280) Bolt or screw the panel mount accessory to a panel using five 8-32 or M4 screws.
(NI WSN-3281) Attach the panel mount accessory using the integrated magnet.
2. Slide the NI WSN-3202 device into the panel mount accessory as shown in Figure 8.
1 Retention Knob
2 Retention Clip
3 Mounting Hole
4 Integrated Mounting Pin
5 Power and I/O Strain Relief
NATIONAL
INSTRUMENTS
5
4
2
3
5
1