Nicetree NT-HF001 User manual

Hanging Mirrored Jewelry Cabinet with LED
Model: NT-HF001
Assembly Instructions

Thank you for purchasing the Nicetree Jewelry Cabinet. Please
read this user manual carefully and keep it in a safe place for
future reference. If you need any assistance, please contact our
support team with your product model number and Amazon order
number.

CONTENTS
Package Contents
IMPORTANT
Installation
Door Mount
Wall Mounted
LED Battery Replacement
Specifications
Warranty & Customer Support
02
03
05
05
06
07
08
08

01/02
Package Contents
Note:
You need to purchase 3 AAA batteries for LEDs in the cabinet.
1 pc
Jewelry Cabinet
4pcs
H Screws
4 pcs
Screw Covers
2 pcs
Screw Anchors
2 pcs
J Screws
2 pcs
Hanging Hooks
1 pc
Double-sided Tape 2 pcs
Keys
1 pc
Warranty Card
1 pc
User Manual
Hanging Mirrored Jewelry Cabinet with LED
Model: NT-HF001
Assembly Instructions
A. B. C.
D. E. F.
G.
J.
H. I.

IMPORTANT
Please read the following instruction carefully and use the product
accordingly. Please keep this manual and hand it over if you transfer the
product. This summary may not include every detail of all variations and
considered steps. Please contact us when further information and help are
needed.
Warnings
1. The product’s primary use is as a mirror and storage cabinet. The user
must strictly assemble and use the product in accordance with this
manual. The seller does not assume any responsibility or liability with
respect to any damage caused by incorrect assembly or improper use.
2. Please check that the cabinet body is intact and that accessories are
complete before mounting. Do not place the edge of the unwrapped
cabinet on the oor to avoid fraying or damage..
3. When mounting the wall cabinet, please keep the holes away from
electrical wires or water pipes, in order to prevent unexpected damage
or losses.
4. Follow the assembly steps shown in the diagram to position and adjust
the parts, then gradually tighten all screws. Do not tighten excessively.
5. The wall-mounted cabinet comes with screws and bolts, which is suitable
for being mounted on solid and at wall surfaces. Considering the
diversity of walls, you need to purchase the appropriate ttings from
professional dealers. The tools are not supplied.
6. It is recommended that two adults mount the cabinet together. Take care
to mount the cabinet horizontally and ensure it is rmly on the wall to
avoid overturning or falling.
7. Open and close the door gently for long-lasting use of the hinges
(the widest angle of the door is about 100 degrees).

8. Please put the article on the at ground and away from sharp and
hard objects. Do not drag the cabinet across the oor - please lift it up
to move.
9. For daily care, please clean with a soft and dry cloth. If necessary, you
can use neutral detergent. Do not wipe the surface with a wet cloth or
hard objects.
10. Keep the article away from acidic chemicals, so as not to cause a
chemical reaction or discoloration, etc.
11. Keep this product in room with normal temperature. Avoid direct
sunlight and do not place next to heat sources, which can cause the
deformation, distortion, and even cracking.
12. There may be a smell when the packaging is removed. If so, please
place the cabinet in a ventilated area and open the door to remove
the smell.
13. The product is not intended for children. Children must be under adult
supervision to use the product. Otherwise the seller is not liable for the
damage or the injury.
14. Never allow children to climb or play around with the product, in order
to protect children from personal injury and to prevent the product
falling and the mirror body being broken.
15. The wall model must be mounted on the wall with supplied or
self-purchased accessories. Prohibit children from climbing or hanging
on the furniture.
16. During the mounting process, keep small objects out of the reach of
children. It may be fatal if parts are swallowed or inhaled.
17. To avoid danger of suffocation, keep the plastic bag away from
babies and children.
03/04

The hooks included t doors less than 4.5cm thick.
Step 1: Install the two hanging hooks on the back of cabinet with the
4 H Screws.
Step 2: Attach the double sided tape to the lower part of the back to keep
the cabinet from swinging.
Step 3: Hang the cabinet over the door and press it towards the door to x.
Now you can use the keys to lock or open the door.
Installation
Door Mount
Back
H.
G. F.
C.

Step 1: Measure and mark the cabinet’s position on the wall, then drill the
holes.
Step 2: Insert the screw anchors.
Step 3: Attach the double sided tape to each corner of the back to keep
the cabinet from swinging.
Step 4: Hang the cabinet with the J screws and press it towards the wall to
x.
Wall Mounted
Note:
1. Do not place the product in damp areas.
2. Keep accessories away from children during the installation.
Wall
Wall
Wall
Drill the holes after measuring
and marking position .
Double-sided Tape
Back
Wall Mounted
I. I.
I.
I. I.
J.
J.
J.
J.
D.
05/06

8 LEDs were installed at the top of the inside of the cabinet during manufac-
turing. They are powered by 3 AAA batteries and will light up automatically
when the door is opened.
LED Battery Replacement
Light Switch:
Auto ON with Door Opened

OFF
ON
OFF
ON
3 AAA batteries
Specications
Material
Mirror Included ?
LED Included?
Dimensions
Weight
Real glass, Quality MDF, Soft Velvet
Yes
Yes
108 x 37 x 9.5cm / 42.5 x 14..6 x 3.7in
9.2kg / 20.3lbs
Warranty & Customer Support
12 months warranty.
If you need any assistance or have any questions, please contact our
store and we will reply within 24 hours. Please leave your order number
and details of your question, so we can help you solve the issue as soon
as possible.
07/08

Made in China
NT-HF001-V1.0 EN
E-mail: [e-mail]
Address: 505, Bldg 6, Shenglong Garden phase 2,
No.2 Shenglong Rd., Longcheng
St., Longgang Dist., Shenzhen
www.nicetree.co
Manufacturer
Shenzhen Xiaojia Technology Co.Ltd
NORTH AMERICA