Nightlife crowdDJ 22" Kiosk with 2 Piece Podium User manual

For support with the installation of this equipment contact Nightlife Technical Support:
AUS: 1800 773 468 | NZL: 0800 111 960 | ASIA-PACIFIC: [phone] | Other Countries: [phone] nightlife.com.au
Installation Guide
22" Chromebase Kiosk
with desk stand
For more support with installation of this equipment contact Nightlife Technical Support:
AUS: 1800 773 468 | NZL: 0800 111 960 | ASIA-PACIFIC: [phone] | INT: [phone] nightlife.com.au


330mm (w) x 530mm (h) x 40mm (d)

Base: 􀀔􀀔􀀔400mm x 400mm
Tube: 75mm x 1100mm

1220mm (w) x 420mm (h) x 400mm (d)

Ethernet connection

240V

22" Kiosk with 2 Piece Podium

For support with the installation of this equipment contact Nightlife Technical Support:
AUS: 1800 773 468 | NZL: 0800 111 960 | ASIA-PACIFIC: [phone] | Other Countries: [phone] nightlife.com.au
For more support with installation of this equipment contact Nightlife Technical Support:
AUS: 1800 773 468 | NZL: 0800 111 960 | ASIA-PACIFIC: [phone] | INT: [phone] nightlife.com.au

 22" Kiosk
 3m Ethernet cable
 Power supply consisting of '1x IEC C5
cloverleaf power cable' and '1x 19V
adaptor'
 M12x35 Countersunk screw
 400mm x 400mm baseplate
 M4x16 Philips screws + washers
 8mm Allen key
 4mm Allen Key
 M4x20 Hex button socket screws
 2 piece podium tube

A
B

E
F

J
IH
C

The kiosk must be oriented
so the Chrome logo is in
the top-right corner.
1
3
2
Feed the 19V adaptor cable (C) and the 3m
ethernet cable (B) through the halfmoon slot at the
base of the podium tube (J) and out through the top
leaving ~300mm of slack. Fix the base plate (E) to
the podium stem with the M12x35 screw (D).
JB
C
E

Join the 2 piece podium tube (J) together using the
3 M4x20 Hex button socket screws (I) and tighten
with the 4mm Allen key (H).
I
J
Connect the 19V adaptor to the IEC C5
cloverleaf power cable (C) and place the 19V
adaptor on the podium base and secure with
the velcro strip. Using the 4 M4 Philips head
screws and washers (F), x the kiosk (A) to the
podium tube (H). Connect the 3m ethernet
cable (B) and the 19V power plug to the kiosk.
F
A
J

Our crowdDJ® Kiosks are a great addition to any venue. For any issues or questions about positioning or nding the
best location for your Kiosk, your Customer Service Representative will be available to help.