AVF Group JZL204 User manual

JZL204 Leaflet No. 463864 rev02
AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7YE, England
32"
81cm
44lbs
20kg
STOP
Read through instructions before commencing installation.
If you have any questions about this product or issues with installation
contact the customer services helpline before returning this product to
the store. See jl.avfgroup.com/p/jzl204 for more information.
ALL
CUSTOMER SERVICES HELP LINE NUMBER:
01952 670009

Fit the Mounting Plate
Assembly Overview
Fit the Wall Bracket
Attach the TV

Measure the TV fixing holes Width and Height
1
Choose and Prepare the TV Mounting Plate
2
Fitting the TV Mounting Plate
3
Fitting the Wall Bracket
4
Assemble the Bracket
5
Index
Fitting the Top and Bottom Covers
6
Retain all packaging in case the bracket needs to be returned.
Contents may vary from photography/ Illustrations.
You will not need all these parts, so expect there to be some left over
depending upon the specification of wall.
This product is intended for indoor use only. Use of this product outdoors
could lead to failure and personal injury.
It is the responsibility of the installer to ensure that the mounting wall is of
a suitable standard and void of any services (eg gas, electricity, water etc).
AVF accept no responsibility for any damage or loss caused by installing
this product in a sub standard wall.
Attach the TV
7
Fitting the Arm Covers and Cable Management
8
TV Levelling and Tilt
9

Tools Recommended
Boxed Parts
Stud Finder Ø3mm (1/8")
Wood
Ø7mm (17/64")
Masonry
A
BC
D
E1
E2

Fx2 Gx2 Hx1 Ix1
Mx2 Nx4 Ox4
Sx1
Px1
Jx2
Kx2 Lx2
NYLON
5mm 3mm
Tx1
TV Screws
Q1x4 Q4x4 Q3x4
M4
16mm
Q2x6
M5
M6 M8
16mm
16mm 16mm
Q5x4
M8
Rx6
30mm

Before you begin
Measure the TV fixing holes Width and Height
1
TV Fixing Holes
75 / 100 / 200mm
75 / 100 / 200mm
X
Y
If your TV holes do not line up STOP installation now and contact
the customer help line
!
You are provided with 3
diameters of TV fixing
screws, M4, M6 and M8.
Determine the screw
diameter that fits and
remember for step 3.
Q3
Q1
M8 =
M6 =
M4 =
Q4-Q5
Remove bottom cover
iRemove
top cover
ii
Keep top and bottom covers until step 6.

Use the option that fits your TV
Choose and Prepare the TV Mounting Plate
2
D
100mm
Y
75mm
Y
= 75mm / 100mmX
Y
OPTION 1
= 75mm / 100mm
75mm
X
100mm
X
100mm
Y
200mm
X
200mm
Y
= 200mmX
Y
OPTION 2
= 100mm / 200mm
If you choose OPTION 2 you will
need to attach adaptors E1 & .
Please see over the page for details.
E2
D
E1E2

Q2x6
M5
16mm
Rx6
R
Q2
E1
E2
OPTION 2

Top
Top
Q1/Q3
Q4x4 Q3x4
M6 M8
16mm 16mm
Only use this option if
your TV fixing holes are
75 x 75mm or 100mm x 100mm
OPTION 1
OPTION 2
Fitting the TV Mounting Plate
3
After completing step 3
you will have fittings left
over, please keep for
future reference
!
Only use this option if
your TV Fixing holes are
200 x 100mm or 200mm x 200mm
Q1
You can only use screw Q1
with 75 x 75mm or 100 x 100mm
TV fixing holes
You can only use
screws Q1 or Q3 with
200 x 100mm
TV fixing holes
You can only use
screws Q3-Q5 with
200 x 200mm
TV fixing holes
If your TV has an irregular back or
if you have any issues fitting to the
back of your TV with the screws
supplied, please call the customer
services helpline 01952 670009
Q1x4
M4
16mm
100 x 100mm
TV fixing holes shown
200 x 200mm
TV fixing holes shown
Q5x4
M8
30mm

55mm (21/8")
Ø7mm
(17/64")
Ø3mm
(1/8")
Fitting the Wall Bracket
4
Ensure bracket is in the centre of the wood stud
!
Remove dust from hole
55mm (21/8")
Solid Wall Wood Stud
A
P
A
P

DO NOT over tighten screws
Tighten screws by hand only
!
DO NOT over tighten screws
Tighten screws by hand only
!
Lubricate screw thread with soap
Lubricate screw thread with soap
8mm (5/16")
MAX
Nx4 Ox4 Nx4
N
O
N

Assemble the bracket
5
Before you assemble the bracket, please remove the 2 arm
covers and screws from arm B and keep until step 8.
M
M
J
S
K
C
G
F
L
B
J
S
K
G
F
L
B
NYLON
NYLON
5mm
5mm
R
3mm
Use your finger and
thumb to hold nyloc
nut (L) steady while
you tighten screw ( )M
L
M

Fitting the Top and Bottom Covers
6
Fit the top cover
i
ii Fit the bottom cover

i
ii
Attach the TV
7
i. Remove parts H and I
ii. Lift safety plunger and
pull TV away (Safety
plunger can be locked
open by turning anti-
clockwise after lifting)
IMPORTANT
Ensure safety
plunger is down
!!
HI
To remove TV
Click!Click!

Cable
management
Fitting the Arm Covers and Cable Management
8
T

Levelling
Tilt
TV Levelling and Tilt
9