Nikon D4s Installation and maintenance instructions

En
Network Guide
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
Printed in Japan
SB4A01(11)
6MB21011-01

ii
What Networks Can Do for You
This manual describes how to connect to a network, access the camera
remotely, and upload images to computers and ftp servers over Ethernet
connections. Once a connection has been established, you can:
1Upload existing photos and movies
2Take or browse photos remotely
FTP upload (041) Image transfer (015)
ftp server Computer
Camera control (019) HTTP server (022)
Camera Control Pro 2
iPhone
Computer

iii
3Control multiple cameras
(requires optional WT-5 wireless transmitter)
ATip
See page 7 for information on configuring the camera for connection to a
host computer, page 35 for information on configuring the camera for
connection to an ftp server. The camera can also be used with optional WT-4
wireless transmitters or UT-1 communication units.
Synchronized release (045)

iv
Trademark Information
Mac, OS X, and iPhone are registered trademarks of Apple Inc. in the
United States and/or other countries. Microsoft, Windows and Windows
Vista are either registered trademarks, or trademarks of Microsoft
Corporation in the United States and/or other countries. XQD is a
trademark of Sony Corporation. CompactFlash is a trademark of SanDisk
Corporation. All other trade names mentioned in this manual or the other
documentation provided with this Nikon product are trademarks or
registered trademarks of their respective holders.
Apple Public Source License
This product includes Apple mDNS source code that is subject to the
terms of the Apple Public Source License located at URL
http://developer.apple.com/opensource/.
Copyright © 2014 Apple Computer, Inc. All Rights Reserved.
This file contains Original Code and/or Modifications of Original Code as
defined in and that are subject to the Apple Public Source License Version
2.0 (the ‘License’). You may not use this file except in compliance with the
License. Please obtain a copy of the License at
http://www.opensource.apple.com/license/apsl/ and read it before
using this file.
The Original Code and all software distributed under the License are
distributed on an ‘AS IS’ basis, WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH
WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET
ENJOYMENT OR NON-INFRINGEMENT. Please see the License for the
specific language governing rights and limitations under the License.

v
Notices
•No part of this guide may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form,
by any means, without Nikon’s prior written permission.
•Nikon reserves the right to change the specifications of the hardware
and software described in this guide at any time and without prior
notice.
•Nikon will not be held liable for any damages resulting from the use of
this product.
•While every effort has been made to ensure that the information in this
guide is accurate and complete, we would appreciate it were you to
bring any errors or omissions to the attention of the Nikon
representative in your area (address provided separately).
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that has been digitally
copied or reproduced by means of a scanner, digital camera, or other
device may be punishable by law.
•Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government
bonds, or local government bonds, even if such copies or reproductions
are stamped “Sample.”
The copying or reproduction of paper money, coins, or securities which
are circulated in a foreign country is prohibited.
Unless the prior permission of the government has been obtained, the
copying or reproduction of unused postage stamps or post cards issued
by the government is prohibited.
The copying or reproduction of stamps issued by the government and
of certified documents stipulated by law is prohibited.

vi
•Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of
securities issued by private companies (shares, bills, checks, gift
certificates, etc.), commuter passes, or coupon tickets, except when a
minimum of necessary copies are to be provided for business use by a
company. Also, do not copy or reproduce passports issued by the
government, licenses issued by public agencies and private groups, ID
cards, and tickets, such as passes and meal coupons.
•Comply with copyright notices
The copying or reproduction of copyrighted creative works such as
books, music, paintings, woodcuts, prints, maps, drawings, movies, and
photographs is governed by national and international copyright laws.
Do not use this product for the purpose of making illegal copies or to
infringe copyright laws.
Background Knowledge
This guide assumes basic knowledge of ftp servers, local area networks
(LANs), and wireless networks. For more information on installing,
configuring, and using the devices in a network, contact the manufacturer
or network administrator. Information on configuring computers for
connection to wireless networks may be found in the on-line help for the
Wireless Transmitter Utility.
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product
support and education, continually-updated information is available on-
line at the following sites:
•For users in the U.S.A.: http://www.nikonusa.com/
•For users in Europe and Africa: http://www.europe-nikon.com/support/
•For users in Asia, Oceania, and the Middle East: http://www.nikonusa.com/
Visit these sites to keep up-to-date with the latest product information,
tips, answers to frequently-asked questions (FAQs), and general advice on
digital imaging and photography. Additional information may be
available from the Nikon representative in your area. See the following
URL for contact information: http://imaging.nikon.com/

vii
Illustrations
The appearance and content of the software and operating system
dialogs, messages, and displays shown in this manual may vary with the
operating system used. For information on basic computer operations,
see the documentation provided with the computer or operating system.
AWT-4 Wireless Transmitters and UT-1 Communication Units
For information on using optional WT-4 wireless transmitters or UT-1
communications units, see the documentation for the devices in
question. The options described in the product manual as being in the
device info and device settings menus can be accessed from Network >
Device info and settings in the D4S setup menu.

viii
What Networks Can Do for You.........................................................ii
Notices........................................................................................................v
Introduction 1
Network Options.....................................................................................2
Installing Software .................................................................................4
Transfer, Control, and HTTP 7
Ethernet Connections ...........................................................................7
Step 1: Connecting an Ethernet Cable....................................... 8
Step 2: Enabling the Ethernet .....................................................10
Step 3: The Connection Wizard ..................................................10
Step 4: Pairing...................................................................................13
Image Transfer...................................................................................... 15
Camera Control .................................................................................... 19
HTTP Server............................................................................................ 22
Computer Web Browsers..............................................................28
iPhone Web Browsers ....................................................................32
Table of Contents
For information on connecting to a wireless LAN using an
optional WT-5 wireless transmitter, see the manual provided
with the WT-5.

ix
FTP 35
Ethernet Connections ........................................................................ 35
Step 1: Connecting an Ethernet Cable .................................... 36
Step 2: Enabling the Ethernet..................................................... 37
Step 3: The Connection Wizard.................................................. 37
FTP Upload............................................................................................. 41
Synchronized Release 45
Synchronized Release Options .................................................. 46
Taking Pictures................................................................................. 48
Menu Guide 51
Appendices 61
Creating Profiles on a Computer ................................................... 61
Creating an FTP Server ...................................................................... 63
Windows 8.1/Windows 7.............................................................. 64
Windows Vista.................................................................................. 71
Windows XP ...................................................................................... 78
Manual Profile Creation..................................................................... 82
Troubleshooting .................................................................................. 84
Index......................................................................................................... 85
For information on connecting to a wireless LAN using an
optional WT-5 wireless transmitter, see the manual provided
with the WT-5.

x

1
Introduction
This guide describes how to use the camera in (chiefly Ethernet)
network environments, including connecting to and operating the
camera in a network. Be sure to read this guide and the camera
manual thoroughly and to keep them where they will be read all
those who use the product. Information on using optional WT-5
and WT-4 wireless transmitters and UT-1 communication units can
be found in the manuals for the devices in question.
Symbols and Conventions
The following symbols and conventions are used throughout this manual:
DThis icon marks cautions, information that should be read before
use to prevent damage to the product.
AThis icon marks notes, information that should be read before
using the device.
0This icon marks references to other pages in this guide.

2
Network Options
The camera can be connected to Ethernet or wireless networks
using the built-in Ethernet port or an optional WT-5 or WT-4
wireless transmitter. Note that an Ethernet cable (available
separately from commercial sources) is required for an Ethernet
connection.
❚❚ The Built-in Ethernet Port and WT-5 Wireless Transmitter
The following modes are available when the camera is connected
to a network using the built-in Ethernet port or an optional WT-5
wireless transmitter:
❚❚ The WT-4 Wireless Transmitter
The WT-4 can be used in any of the following modes. For more
information on the features available with the WT-4, see the
manual supplied with the WT-4.
FTP upload
(041) Upload existing photos and movies to a computer
or ftp server, or upload new photos as they are
taken.
Image transfer
(015)
Camera control
(019)
Control the camera using optional
Camera Control Pro 2 software and save new
photos and movies directly to the computer.
HTTP server
(022)
View and take pictures remotely using a browser-
equipped computer or iPhone.
Synchronized release
(with WT-5 only; 045)
Synchronize the shutter releases for multiple
remote cameras with a master camera.
Transfer mode
Upload existing photos and movies to a computer
or ftp server, or upload new photos as they are
taken.
PC mode
Control the camera using optional
Camera Control Pro 2 software and save new
photos and movies directly to the computer.

3
AOptional UT-1 Communications Units
In place of the built-in Ethernet port, an optional UT-1 communication
unit can be used to connect the camera to a local area network (LAN).
The UT-1 supports the same modes as the WT-4 and can be used with
Ethernet networks or combined with an optional WT-5 wireless
transmitter for connection to wireless networks.
AEthernet Connection
Ethernet connections require no adjustments to wireless LAN settings.
AFTP Servers
Servers can be configured using standard ftp services, such as IIS (Internet
Information Services), available with supported operating systems. Image
transfer and camera control do not support connection to computers on
other networks via a router, Internet ftp connections and ftp servers running
third-party software.
AHTTP Sever Mode
Internet connections are not supported in http server mode.
ARouters
Connection to computers on other networks via a router is supported only
when FTP upload or HTTP server is selected.
AFirewall Settings
Ports 21 and 32768 through 61000 are used for ftp, ports 22 and 32768
through 61000 for sftp, while image transfer and camera control modes use
TCP port 15740 and UDP port 5353. File transfer may be blocked if the server
firewall is not configured to allow access to these ports.

4
Installing Software
Before connecting to a network, install the Wireless Transmitter
Utility, available for free download from the Nikon website using
the supplied ViewNX 2 CD (an Internet connection is required).
The Wireless Transmitter Utility is required for pairing in image
transfer and camera control modes (014) and can be used to
create network profiles.
Before installing the Wireless Transmitter Utility, confirm that your
computer meets the system requirements (06) and that the
product firmware (including the firmware for the camera and
wireless transmitter or communication unit) and any supplied
software have been updated to the latest versions.
1Double-click the installer icon.
After downloading the installer, double-click the
installer icon.
2Select a language (Windows only).
Select a language and click Next.
wClick Next
qSelect language

5
3Start the installer.
Click Next (Windows) or Continue (Mac) and follow the
on-screen instructions.
4Exit the installer.
Click OK (Windows) or Close (Mac) when installation is
complete.
Windows Mac
Click Next Click Continue
Windows Mac
Click OK Click Close
AThe WT-4 Setup Utility
The Wireless Transmitter Utility must be reinstalled if the WT-4 Setup
Utility is uninstalled after installation is complete.

6
AWireless Transmitter Utility System Requirements
See the websites listed on page vi for the latest information on supported
operating systems.
Windows
CPU Intel Celeron, Pentium 4, or Core series, 1.6 GHz or better
OS
Pre-installed versions of Windows 8.1, Windows 7, Windows
Vista, and Windows XP; note that the application runs in
32-bit compatible mode in 64-bit versions of Windows 8.1,
Windows 7, and Windows Vista, while 64-bit versions of
Windows XP are not supported
Memory
(RAM)
•32-bit Windows 8.1, Windows 7, or Windows Vista: 1 GB or more
(2 GB or more recommended)
•64-bit Windows 8.1, Windows 7, or Windows Vista: 2 GB or more
(4 GB or more recommended)
•Windows XP: 512 MB or more (2 GB or more recommended)
Hard-disk
space
A minimum of 1 GB available on the startup disk (3 GB or
more recommended)
Graphics
•Resolution: 1024 × 768 pixels (XGA) or more; 1280 × 1024
pixels or more recommended
•Color: 24-bit color (True Color) or more
Mac
CPU Intel Core or Xeon series
OS OS X 10.9, 10.8, or 10.7
Memory
(RAM) 2 GB or more (4 GB or more recommended)
Hard-disk
space
A minimum of 1 GB available on the startup disk (3 GB or
more recommended)
Graphics
•Resolution: 1024 × 768 pixels (XGA) or more; 1280 × 1024
pixels or more recommended
•Color: 24-bit color (millions of colors) or more

7
Transfer, Control, and
HTTP
Follow the steps below to connect to a computer in image transfer,
camera control, and http server modes.
Ethernet Connections
Image transfer Camera control HTTP server
Install the Wireless Transmitter Utility
(04)
Step 1: Connect an Ethernet cable (08)
For information
on using the
WT-5 to connect
to wireless
networks, see
the WT-5
manual.
Step 2: Select Ethernet (010)
Step 3: Run the connection wizard (010)
Step 4: Pair the camera and computer
(013)
Transfer pictures
(015)
Control the
camera (019)
Access the camera
(022)
DChoosing a Power Source
To prevent the camera powering off unexpectedly during setup or data
transfer, use a fully-charged battery or an optional AC adapter. For more
information, see the camera manual.

8
Step 1: Connecting an Ethernet Cable
Step 1: Connecting an Ethernet Cable
After starting the computer and logging in, ready the camera as
described below. Do not turn the camera off or disconnect the
Ethernet cable while data are being transferred to the computer.
1Insert a memory card.
Turn the camera off and insert a memory
card. This step can be omitted in camera
control mode (019).
2Connect an Ethernet cable.
Connect the Ethernet cable as shown below. Do not use force
or insert the connectors at an angle.

9
Step 1: Connecting an Ethernet Cable
3Turn the camera on.
Rotate the power switch to turn the
camera on.
AConnection Status
Connection status is shown by the LEDs next to
the camera’s Ethernet connector.
AThe Viewfinder Display
Connection status is also shown in the camera
viewfinder. Tis displayed when the camera is
connected via Ethernet, Uwhen it is
connected to a wireless network, and a flashing
when an error has occurred.
Power switch
LEDs
Green LED Yellow LED Status
●
(off)
●
(off)
Network functions disabled (051) or Ethernet
cable not connected.
K
(on)
●
(off) Waiting to connect.
K
(on)
K
(on) Connecting.
K
(on)
H
(flashes) Connected.
H
(flashes)
H
(flashes) Error.

10
Step 2: Enabling the Ethernet
Step 2: Enabling the Ethernet
Select the Ethernet as the network device used by the camera.
1Display the hardware list.
In the setup menu, select Network, then
highlight Choose hardware and press 2
to view the hardware list.
2Select Wired LAN.
Highlight Wired LAN and press Jto
select the highlighted option and return
to the network menu.
Step 3: The Connection Wizard
Follow the on-screen instructions to create a network profile.
1Display network profiles.
In the network menu, highlight Network
settings and press 2to display the
profiles list and other network settings.
2Select Create profile.
Highlight Create profile and press 2.
Note that if the list already contains nine
profiles, you will need to delete an
existing profile using the O(Q) button
before proceeding (053).