Nikon KEYMISSION 360 User manual

I AM ON MISSION 360º I AM ON MISSION 360º I AM ON MISSION 360º
Directions for pairing with an Android™
powered device via Bluetooth®

1
CAMERA PREP:
Preparing the camera
MAKE SURE...
Battery is fully charged (see manual “Charging the Battery” page 6)
Micro SD card with sufficient space has been installed (see page 4)
Airplane Mode has been shut off (see page 9)
Camera is shut OFF (if not hold down video button for 3 seconds)
1
2
3
4
Memory card slot Airplane mode OFFBattery latchOpen Door Close Door

22
STEP ONE:SMART DEVICE:
Check Smart Device Settings
MAKE SURE... • Wi-Fi®setting is ON • Bluetooth setting is ON
Go to
“Settings”
on your
smart
device
Make sure
Bluetooth is ON
Make sure
Wi-Fi is ON
For latest firmware and app information www.nikonusa.com

3
Download SnapBridge 360/170 App
• Go to the Google Play™Store on your smart device
• Search for SnapBridge 360/170 and select correct app
• Download and Install SnapBridge 360/170
• Go back to your home screen and click on app
APP DOWNLOAD:
Download / Install
SnapBridge 360/170 App

STEP ONE:
4
BLUETOOTH PAIRING:
4
Pairing the Camera
ON YOUR SMART DEVICE ON YOUR CAMERA ON YOUR SMART DEVICE
Launch SnapBridge
360/170 on your
smart device
Tap the camera name
when it appears. The
camera and phone will
pair automatically.
...then flash alternately.
When that happens, camera is in
pairing standby mode.
Note: Only pair the camera using the Snapbridge 360/170 app (Do not try and pair from device Bluetooth setting!)
Press and Hold movie button
until the green status lamps flash
simultaneoulsly...

5
If you need to un-pair and re-pair your Android powered device and the KeyMission 360 camera, read this article for detailed
instructions on how to do so. Go to www.nikon.usa/keymission360
F.P.O.
You can either choose to
continue as a guest or sign up
for a Nikon ID. After you have
done this, you will be taken
back to the Connect tab.
1
Now that the Bluetooth®
is paired, this is the screen
you will see.
This symbol
means
you are
paired with
Bluetooth
2

66
If you want to shoot remotely or download stills or videos, you will need
to connect to the camera’s Wi-Fi between the KeyMission 360 camera and
the SnapBridge 360/170 app.
Make sure to turn on Wi-Fi in the Wi-Fi settings of your smart device
Select the Camera icon
on the app.
Tap Remote
photography.
After switching to your
Camera’s Wi-Fi signal,
the Remote Photography
Live View screen opens.
REMOTE PHOTOGRAPHY:
Remote
Photography
Shoot stills and video
remotely, download images,
and adjust camera settings
Other
Add/edit image
credits, view notices
from Nikon, and
app instructions
Connect
Camera and
Smartphone
connection
settings
Gallery
View, share,
edit, and delete
downloaded
images
You will see
a “live view”
of what your
camera sees.
This is a low
resolution
view and not
indicative of
the video
quality
Video
Record
Still
Photos
Camera
Setting
1 2
3

DOWNLOADING:
7
Downloading Videos / Stills
Navigate to
the Camera
Tab and Select
‘Download
Selected Pictures’
1
Select the video you want
to download and press
‘Download’ to download
it to your device
2
You may see the following prompt:
‘To reduce the time required,
download will begin when there
is more bandwidth available.
OK?’ If you see this, just press ‘OK’
and your download will begin
3
Connect Gallery Camera Other

SHARING:
Saving videos for YouTube™& Facebook®
When the edit screen
returns, press ‘Cancel’
2
Select the edit icon and choose
‘Add YouTube metadata’
1
8

Follow instructions in
Facebook®or YouTube™
to upload and show your
movies or photos.
5
Press the ‘Share’ button
and choose Facebook®
or YouTube™
4
Return to the gallery and
select the file that now has
the YouTube metadata added.
3
99