Nile NWA1000 User manual

Wireless AP
NWA1000
Product Specification
Product dimensions
245mm x 245mm x 50mm
(exclude universal mounting kit)
Product weights
1.75kg
Radio frequency
One Wi-Fi 2.4GHz
One Wi-Fi 5GHz
One Wi-Fi 2.4/5GHz(scanning)
One Bluetooth 2.4GHz
Operation frequency
2.4GHz
5GHz
Bluetooth low energy(V4.1)
2.4G : 2412 ~ 2462MHz
5G Band 1 : 5180 ~ 5240MHz
5G Band 4 : 5745 ~ 5825MHz
BT : 2402 ~ 2480MHz
Networking interface
Two 5G mGig Ethernet ports
Antenna Gain
Wi-Fi 2.4GHz band : 4.6 dBi (Omni)
Wi-Fi 5GHz band: 5 dBi (Omni)
Dual band Wi-Fi(2.4/5GHz): 4.6/5dBi
(Omni)
BLE: 4.4dBi (Omni)
Max power consumption
35watts
Max Tx Power
FCC:
Wi-Fi 2.4GHz band: 627.338mW
Wi-Fi 5GHz band:
5180-5240 MHz: 477.372 mW
5745-5825 MHz: 585.520 mW
BLE: 6.637 mW
IC:
Wi-Fi 2.4GHz band: 627.338mW
Wi-Fi 5GHz band:
5180-5240 MHz: 57.687 mW
5745-5825 MHz: 585.520 mW
BLE: 6.637 mW

Power source
DC power: 12V/3.5A power adapter
Power over Ethernet(PoE): 802.3bt
Mounting mode
Ceiling,
Operation temperature
0 ~ 45 C
Operation humidity
5 –95% Noncondensing
Altitude
10,000ft (3,048m)

Installation Guide
Installation of ceiling plate + AP on T-bar (9/16” & 15/16”)

Uninstallation of ceiling plate + AP from T-bar (9/16” & 15/16”)

Installation of RJ45 cable on ceiling plate

Installation of ceiling plate + AP on wall mount

Regulatory Compliance Information:
Safety Notice
. Please use CSA/UL Certification Approval & LPS’s External Power Adaptor.
. Please connect with CSA/UL Certification Approval & LPS’s DC Source.
. NWA1000 is indoor use Wireless AP.
. There is a risk of fire if the battery is replaced with an incorrect type.

FCC Requirement for Operation in the United States of
America:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Guideline for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 31
cm between the radiator & your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
●Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
●This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
●For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is
restricted to indoor environment.
Industry Canada statement
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le
dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit
accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems;
(ii) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s)
necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 shall be clearly indicated.
Avertissement:
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable
aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de
l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence
de la p.i.r.e. applicable au masque d’élévation, énoncée à la section 6.2.2.3, doivent être
clairement indiqués.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with greater than 38cm
between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de
38 cm entre le radiateur et votre corps.