Niles Niles CM710SI User manual

SPECIFICATIONS SHEET
CALL 1-800-BUY-HIFI – www.nilesaudio.com
BLENDING H IGH F IDELITY A N D A RCHITECTURE®
7" Stereo Input Ceiling Mount Loudspeaker
CM710Si
7" STEREO INPUT
CEILING MOUNT LOUDSPEAKER
• 7" Polypropylene Dual Voice Coil Woofer
• Dual 13mm Kaladex® Tweeters

SPECIFICATIONS SHEET
Loudspeaker Model Works With
Model Stock Number Previous Bracket New Bracket Metal Enclosure Hole Cover
CM710Si FG01303
NILES AUDIO CORPORATION 12331 SW 130 Street, Miami, FL 33186 1-800-BUY-HIFI – www.nilesaudio.com
©2007 Niles Audio Corporation. All Rights Reserved. Niles and the Niles logo are registered trademarks of Niles Audio Corporation. CS0054
P
RODUCT CONSTRUCTION AND ACCESSORIES
7" Stereo Input Loudspeaker
CM710Si
Stock Number
FG01303
Features
■ Integrated woofer/baffle design delivers greater low frequency response by employing a
7" woofer where competitive models of the same outer size employ 6 1/2" woofers
■ Polypropylene dual voice coil woofer reproduces left and right channel inputs from a
single speaker
■ Treated urethane surround increases sensitivity and preserves durability
■ Dual 13mm fluid-cooled Kaladex® tweeters provide wide dispersion for clear and detailed
high frequencies
■ Bridge-mounted stereo imaging (Si) tweeter array directs the high-frequency sounds from both
the left and right channels at opposing angles to preserve stereo separation
■ Includes flush-mount MicroPerf™ aluminum grille for a clean and unobtrusive look
■ Weather resistant construction reduces installation limitations and provides unique solutions in
showers or outdoors under eaves
Specifications
■ Frequency Response: 61Hz to 20kHz +/-3dB
■ Impedance: 8 ohm nominal; 6 ohm minimum
■ Recommended Amplifier Power: 10 to 75 Watts
■ Frame Dimensions: 9 1/4 inches
■ Hole cutout dimensions: 8 inches
■ Depth behind ceiling: 4 3/8 inches
Warranty: Five-year limited
7
INCH STEREO INPUT CEILING MOUNT LOUDSPEAKER
CM700 CE
FG01396
CM6 Series
Bracket Kit
FG00655
CM700 BKT
FG01308
CM700 Hole Cover
FG01309
9-1/4"
Frame Outer
Diameter
8"
Hole
Cutout
4-3/8" Depth
8"
Hole
Cutout
4-11/16" Depth