Nissin i40 Installation guide

Nomenclature
Quick Manual
for Canon/ Nikon/ Four Thirds
1 Fill-in reflector
2 Flash head
3 Light diffusing panel
4 Video light
5 Remote/ Slave sensor
6 AF-assist light
7 Mounting foot
8 Hotshoe contacts
Accessories:
9 On/ Off switch
10 Pilot button (Test flash button)
11 Function dial
12 Release button
13 Power dial
14 Battery compartment door
A Indicator lamp A
B Indicator lamp B
C Indicator lamp C
022014_R.3.0
POWER ON/ OFF
Video light
Auto Auto control
Auto control
TTL
Wireless TTL
(Group A/ B/ C)
Mode Power Dial
Turn on the flash unit
Press the on/ off switch. Indicator lamp A is on.
The pilot button turns red showing the unit is charging.
In a few seconds, the pilot button turns green.
The flash sleep mode turns off in about 2 mintues (in A/ TTL/ M mode)
or about 5 mintues (in SD/ SF/ Wireless TTL Slave mode) after the
setting job is terminated.
For a test-flash, press the pilot button.
The power is automatically tuned off in about 60 mintues, when the
flash is not in use.
Slave Film
Slave Digital
Manual
Soft box
Carabiner
(NOT FOR CLIMBING)
Pouch
Flash stand
FP High-speed synchronization in A/ M/ TTL mode
For Four Thirds only
Press and hold the Pilot button in 3 seconds.
Indicator lamp A starts blinking.