Nitelighter NL35 User manual

NL35 INSTALLATION/OPERATION MANUAL
DO NOT PLUG LIGHT IN UNTIL INSTRUCTED IN MANUAL
READ ALL DIRECTIONS FIRST THEN REFER TO EXAMPLE IMAGES BEFORE PERFORMING THAT STEP
A. To install bulb, place the light on a table or similar flat, dry working surface.
Use the supplied multitool lock key to loosen the seal ring. Insert the key into the locking latch
on the bottom of the light as shown in FIG 1. Turn and hold the key to the left to release the
locking mechanism. At the same time rotate the seal ring in a counter clockwise direction to
loosen. emove ring and lens. (See FIG 2)
®

B. emove the bulb from its box being careful not to touch the lens of the bulb. Install
the bulb by pressing the two bronze legs of the bulb into the ceramic socket in the
light housing as shown in FIG 3.
C. Be sure that the bulb is firmly pressed into the socket.
D. BE CA EFUL NOT TO BU N YOU SELF AS THE BULB GETS HOT QUICKLY AND
SHOULD BE TU NED OFF IMMEDIATELY UPON SUCCESSFUL TESTING. OPE -
ATION OF THIS FIXTU E OUT OF WATE FO ANY P OLONGED TIME WILL
DAMAGE THE UNIT AND VOID THE WA ANTY. Plug the light into a wall outlet.
Turn switch on. If light turns on, the test was successful. Unplug the unit. Move to
step E. If light does not turn on, unplug unit from wall and reinstall light bulb. epeat
test again. If it is still not working, contact SPQ Brands customer service at (609) 212-
0221.
E. Carefully replace the lens making sure that there is an even flat fit in the light body.
F. Place the seal ring carefully over the lens making sure it is on straight. Now turn in a
clockwise direction until the ring begins to tighten up. You may hear a clicking sound
which is normal. This is a safety feature designed
to not allow the light seal to loosen or be removed
without the key.
G. Continue to turn clockwise until the index mark on
the seal ring is even with the light body as shown in
Figure 4. NOTE DO NOT OVE TIGHTEN O
TU N BACK SEAL ING IN A COUNTE CLOCK-
WISE FASHION AS THIS WILL CAUSE LEAKAGE!
H. Light is ready to install.

INSTALLATION
A. emove top cap of pool vertical post nearest your installation.
B. Lift one end of your pool’s top ledge. The top ledge is comprised of flat sections that extend
around the top of the pool wall.
C. Slide the pool light onto the pool wall submerging the light in the water. Locate the light in the
middle of the top rail to allow for easier installation.
D. Hold the light down so that the top of the mounting bracket is flush with the top of pool wall. Turn
thumbwheel in a clockwise direction to tighten securely to the wall.
E. Be sure that wire runs completely through the channel of the mounting bracket.
F. eplace top rail and cap.
G. Make sure that water level is above the minimum water line on the light. If not add water to pool.
H. The transformer should be mounted on a nearby vertical surface using the screws provided.
Mount the transformer a minimum of 18 inches from the ground.
I. Plug unit only into a GFCI 110V socket. DO NOT USE EXTENSION CO DS.
OPERATION
Plug light into GFI protected socket when light is needed in pool. Push switch on power supply to turn
on. Push power switch again to turn off.

SIX MONTH LIMITED WARRANT
Electronics Products
Six month limited warranty from date of original purchase for manufacturing defects under normal and reasonable use,
and subject to the maintenance requirements and installation guidelines set forth in the product instruction manual.
Warranty valid only within the continental US and Canada.
THIS WARRANT IS SUBJECT TO THE TERMS, LIMITATIONS AND EXCLUSIONS DESCRIBED BELOW, AND THERE ARE NO OTHER WAR-
RANTIES OR REPRESENTATIONS, EITHER EXPRESS OR IMPLIED, WHETHER OF MERCHANTABILIT , FITNESS FOR A PARTICULAR PURPOSE,
OR OTHER, MADE B THE MANUFACTURER, OTHER THAN THOSE SPECIFICALL SET FORTH IN THIS WRITTEN WARRANT
What is Covered: SPQ Brands warran s i s elec ronic produc o be free from defec s in ma erial and workmanship when leaving he fac ory.
What is not Covered: Any ype of damage o he produc due o improper ins alla ion, main enance, or failure o provide necessary and reasonable main enance; any dam-
age or injury caused by misuse and/or unreasonable use of he produc ; ba eries (if applicable); damage due o or rela ed o improper draining, win erizing, s orage or Ac s
of God; SPQ Brands will no honor any claims for damage o any produc s in ransi unless damage o he shipping con ainer is no ed a he ime of delivery on he rans-
fer company’s delivery bill.
THE WARRANT OBLIGATIONS OF SPQ BRANDS. ARE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT OR OF AN DEFECTIVE
COMPONENT, AT THE OPTION OF SPQ BRANDS. UNDER NO CIRCUMSTANCES WILL SPQ BRANDS. BE LIABLE OR RESPONSIBLE FOR AN
CONSEQUENTIAL OR INCIDENTAL DAMAGES, AND/OR CHARGES FOR LABOR. SPQ BRANDS SHALL NOT BE LIABLE OR RESPONSIBLE
UNDER AN CIRCUMSTANCES OR AN AMOUNT FOR AN CONSEQUENTIAL OR INCIDENTAL DAMAGES, OR FOR AN INJURIES OR DAM-
AGES TO PERSON OR PROPERT USING OR USED IN CONNECTION WITH THE PRODUCT, OR FOR AN OTHER LOSS OF PROFITS OR OTHER
COSTS OR EXPENSES OF AN KIND OR CHARACTER. IF SPQ BRANDS. DETERMINES THAT EITHER REPAIR OR REPLACEMENT OF THE
PRODUCT IS NECESSAR , SPQ BRANDS MA EITHER REPAIR THE PRODUCT AT A NOMINAL CHARGE TO THE OWNER OR REPLACE THE
PRODUCT. THE OWNER BEARS THE SOLE RESPONSIBILIT FOR PRE-PAID RETURN OF THE PRODUCT TO SPQ BRANDS, AND ALL REPAIRED
OR REPLACED PRODUCTS WILL BE RETURNED AT THE OWNER’S EXPENSE.
NO PERSON, FIRM, OR CORPORATION IS AUTHORIZED TO MAKE REPRESENTATIONS OR INCUR AN OBLIGATIONS IN THE NAME OF OR ON
BEHALF OF SPQ BRANDS, EXCEPT AS STATED HEREIN. THE REMEDIES SET FORTH IN THIS WARRANT ARE EXPRESSL UNDERSTOOD TO
BE THE EXCLUSIVE REMEDIES AVAILABLE TO THE OWNER, AND THIS WARRANT CONTAINS THE FULL AND COMPLETE AGREEMENT BE-
TWEEN SPQ BRANDS AND THE OWNER. THIS WARRANT SETS FORTH THE ONL OBLIGATIONS OF SPQ BRANDS, WITH REGARD TO THIS
PRODUCT, AND THERE ARE NO WARRANTIES WHICH EXTEND BE OND THE DESCRIPTION ON THE FACE HEREOF.
The representations set forth herein are the only representations made by SPQ Brands with respect to the product, and this warranty does not constitute ei-
ther a performance or satisfaction guarantee. It is the responsibility of the product owner to regularly test and check the product for proper function and
safety.
This warranty gives the original owner specific legal rights. You may have other rights depending on where you live.
What you must do to file a claim: Call 1-609-212-0221 to initiate a claim. You will receive an instruction package within 10 days.
IMPORTANT: FAILURE TO PROPERL WINTERIZE OUR LIGHT WILL
RESULT IN TERMINATION OF WARRANT .
Begin by unplugging the power cord from its power source. Using the included
seal lock key, use the hex key side as shown in Fig 6. Insert tool into bolt head
and turn counter clockwise until it is completely loose. Then pull the bolt com-
pletely out and place in a safe place. Do the same for the other screw. Grasp
the light body with one hand and firmly pull down. Gently pull extra cord out
from inside light body, and pull the light out of the water and hang over top rail.
Use a string or bungee cord to secure for the winter. When spring arrives, sim-
ply reassemble unit being sure to tuck excess wire into light body. Enjoy sea-
son after season!
WINTERIZATION
www.spqbrands.com