Nivito Cube180 User manual

Cube.
nivit ™ o
nivit
o
INSTALLATION MANUAL
Top-mount
Top-mount
Undermount
Undermount
Flush-Mount
Steel Granite
nivit ™ o
www.nivito.com

Sink care for Steel
Sink care for Granit.
Care instructions for all Nivito stainless steel sink
AVOID CONTACT WITH ROUGH OR DIRTY SURFACES as new polished stainless steel will show scratches!!
• All sinks should only be cleaned with soap/water and a soft cloth or sponge then rinsed and towelled dry.
• The coloured surfaces are a solid coating (Physical Vapour Deposit) or Powder coating (black/white) on the surface
of the stainless steel only – harsh scratching should be avoided.
• Never use steel wool in or on the sink (steel wool should be avoided with any stainless-steel sinks as it can leave
steel deposits on thesinks, which can cause rust.
• Never use harsh abrasive cleaning pads to clean sinks.
• Never use harsh chemicals or bleaches to clean sinks.
• Avoid prolonged contact with ordinary steel containers (e.g. tin cans), as these can rust and stain the sink.
• Avoid prolonged exposures to acids from fruit juices, salts, tea bags etc., as these may leave stains.
Care instructions for all Nivito stainless steel sink
AVOID CONTACT WITH ROUGH OR DIRTY SURFACES as new polished stainless steel will show scratches!!
• All sinks should only be cleaned with soap/water and a soft cloth or sponge then rinsed and towelled dry.
• Never use steel wool in or on the sink.
• Never use harsh abrasive cleaning pads to clean sinks.
• Never use harsh chemicals or bleaches to clean sinks.
• Avoid prolonged exposures to acids from fruit juices, salts, tea bags etc., as these may leave stains.
www.nivito.comwww.nivito.com
1 10

Connect supplies & drain fittings
Conenect the sink drain, trap and waste fittings. Attach water supply
and turn on the water and check for leaks. Fill the sink with water and
check for possible leaks around the drain flange (s). Release water
from the sink and check for possible leaks att drain connections or
disposer connections. Correct any join thats leaks.
Dishwasher
Lock
Do not install if defects are found. By installing the sink, the owner / installe
accepts that the product is free of defects.
The model number on the sink must match the model of sink the customer
ordered. Do not install if incorrect.
Stainless steel can be scratched if you are not careful during assembly.
It’s important that the installer reads thru the full manual.
Check the condition of the
sink before installation
Check if you have the correct
sink model
Avoid scratches
Please Note!
!
www.nivito.comwww.nivito.com
9 2

Connect supplies & drain fittings
13mm
220
180
440
400
R15
R15
20
118
R15
1,2
90
180
190
550
400
R15
R15
440
590
20
118
R15
1,2
275
190
550
540
440
500
400
20
118
R15
R15
250
190
R15
500
1,2
740
700
440 400
R15
R15
20
118
R15
1,2
350
190
700
Cube180 Cube550Cube500
Cube700 Cube500-180
Cubegranite
nivito
Cube Granite 500
8
6
34
200
555
525
555
500
140
400
25
R15
455
555
25
140
505
455 405
555
530
200
8
440
500
R15
R15
180
700
740
400
250
R15
500
1,2
180
190
90
Granite sink
www.nivito.comwww.nivito.com
3 8

Connect supplies & drain fittings
1
3
7
6
2
5
silicon
silicon
6mm
silicon
NEEDED TOOLS
75mm
• • •• ••
75mm
5mm
4
PLEASE NOTE: drawings are not to scale.
They are to assist only.
Top-mountFlush-Mount
Steel sink Steel sink
Granite sink
Double sink
www.nivito.comwww.nivito.com
7 4

silicon
NEEDED TOOLS
Undermount installation For the undermount sinks, proceed as for
the normal built-in sinks. Make a cut-out on the worktop following the
template and/or instructions provided with the sink. Before installing
the sink, seal with silicone. Tighten the brackets.
PLEASE NOTE: drawings are not to scale.
They are to assist only.
15mm
• •••
silicon
silicon
1
4
2
5
3
6
Undermount
Connect supplies & drain fittingsConnect supplies & drain fittings
Click
Steel sink
Granite sink
Steel sink
Granite sink
5b
Steel
Granite
www.nivito.comwww.nivito.com
5 6