6
4. Operating Instructions
4.1 Card and USB
Note: 1) Make sure there are supported picture, music and video files on the Card or
USB device.
2) If there are supported picture and music files on the card or USB device, the
slideshow will automatically play your pictures only. To add accompanying music,
just press the ‘SLIDESHOW’ button on the Remote Control.
4.2 Picture Mode
After turning on the unit, this interface will
appear. Once you insert a card or USB
device into the frame, a slideshow
automatically starts.
Press the RETURN button three times to
get back to the Main Menu that will display
what memory devices are inserted.
Select your memory device, then press
OK. Highlight Photo, press OK to access
thumbnail mode, use to choose
the picture you want to start the slideshow
with, then press OK.
Alternatively, just press the SLIDESHOW
button on the remote control at any time
and the slideshow will begin.
You can also view the slideshow in
splitscreen or multi screen mode. Change
slide mode as follows: press SETUP to
choose SLIDE MODE (single window /
four windows / triple windows), select
with , press OK to confirm.