NIXXO Tanium User manual

3
TABLE OF CONTENTS
INTRODUCTION 4
FEATURES 5
GETTING STARTED 6
Description of control button 6
Description of icons 7
Turning your pager on and off 8
Setting date & time 9
Choosing different alert modes 10
MESSAGES 12
Reading messages 12
Duplicate messages 13
Display 13
Erasing a message 14
Erasing all messages 14
Locking a message 15
OPTIONAL FUNCTIONS 18
Activating menu board 18
Setting alarm 20
Setting auto timer 21
Setting reminder alert 22
Entering greeting 23
Ready messages 24
Setting low battery alert 26
Setting script language 27
BATTERY INFORMATION 28
Low battery indication 28
Replacing battery 28

INTRODUCTION
4
INTRODUCTION
Welcome to Nixxo Pager World!
Your new pager provides you with many enhanced features,
such as 20 kinds of ready messages, 3 alarms, and English & French menu script.
Nine segment display makes easy to read messages.
This user guide gives instructions on how to use Titanium pager.

FEATURES
5
FLEX Protocol
520 Characters Private Message Memory
(20 Slots x 26 Characters)
20 Ready Messages
(User Option On/Off)
AGC (Auto Gain Control) Function Available
Side View 1 Line Display (9 Segment)
Menu Display Available in English & French
Battery Backup When Replacing Battery
Date & Time Display
Receiving Time Stamping
Message Lock
Memory Full Indication
Message Error Indication
Individual Delete & Delete All
1 Daily & 2 Event Alarms
User Selectable 15 Melodies & 5 Tones
Vibration Alert
User Programmable Auto On/Off Timer
Reflective Backlighting Display
User Programmable Unread Message Alert
User Programmable Low Battery Alert
Duplicate Message Indication
User Programmable Headline
1 AAA Battery
FEATURES

GETTING STARTED
6
Function Button
Enter menu set
Change alert mode
Read Button
Read messages
Select menu
Stop alert or alarm
Function Button
Screen
Read Button
1. DESCRIPTION OF CONTROL BUTTON
Titanium

GETTING STARTED
7
Tone Alert
Vibration Alert
Melody Alert
Pager Alarm
Locked Message
Full Memory Capacity
Auto On/Off Timer
Low Battery
Duplicate Message
Service Area Indicator
Continued Message
2. DESCRIPTION OF ICONS

GETTING STARTED
8
TURN OFF
To turn your pager off, press two times. When
Tone off is displayed, press to scan menu
until Power off is displayed.
Press to turn off.
TURN ON
Press for 2 seconds to turn your pager on.
Greeting message is displayed.
BACKLIGHT
Press to activate lamp.
Backlight remains on for 4 seconds before automatically turned off.
3.TURNING YOUR PAGER ON AND OFF

GETTING STARTED
9
4. SETTING DATE AND TIME
Press . Backlight comes on. Then press
again. Tone Off? is displayed.
Press repeatedly until SET TIME is displayed.
Press to select menu. The month indicator begins
to blink.
Press to move to the desired number.
Press to enter correct month. The date indicator
starts blinking.
Repeat above steps to set all fields.
NOTE ) Please adjust the date in Feb. of ordinary year
because the pager will go to Feb.29 regardless of leap year.

GETTING STARTED
10
You can choose one of 3 types of alert modes : beep, vibration or musical alert.
1. VIBRATION ALERT
Press to change the sound alert to vibration alert.
Backlight comes on.
Press again. Tone Off is displayed.
Press to confirm. The standby screen displays .
2. SOUND ALERT
Titanium has 15 melodies and 5 tones.
To choose sound alert, press . Backlight comes on.
Press again. Tone on or Tone off is displayed.
5. CHOOSING DIFFERENT ALERT MODES

GETTING STARTED
11
Press to display Melody Set.
Press to confirm. To scan sound, press .
The screen shows the number for each sound.
From 1 to 15 are melody alerts and from 16 to 20 are
beep alerts. When the screen displays an alert you
want, press to confirm.
The standby screen shows or , depending on
your choice.

MESSAGES
12
1. READING MESSAGES
When a message is received, Titanium either audibly alerts
(beep or musical alert) or vibrates and display the message.
To stop vibration or audible alert, press any button.
If Titanium has any unread message, the screen
displays PAGE . To see the current time, press .
The current time is will be displayed 3 seconds later.
Press to display the message. The screen
displays the time the message was received.
Press again to display the message.
If the message is continued to next page, is displayed.
Press again to read the continued message.
01] the slot number
A : message address.

MESSAGES
13
2. DUPLICATE MESSAGES
If pager receives a duplicate message, duplicate icon
displays on top of the screen.
3. DISPLAY
If the pager has 20 messages, PAGE FULL is
displayed. If Titanium receives more than 20 messages,
the oldest message gets deleted as new message is
received.
When the pager has no message, the screen
displays No Page upon pressing of .
When an error occurs receiving a message, Eis
displayed on the screen. Emeans error message.

MESSAGES
14
4. ERASING A MESSAGE
After reading a message, press .
Backlight comes on.
Press again. You are prompted with ERASE?
display.
Press to confirm. If you want to exit this mode,
press .
5. ERASING ALL MESSAGES
ERASE ALL command erases all messages except the locked messages.
Press . Backlight comes on.
Press and hold for 2 seconds.
The screen automatically changes to ERASE ALL
Press to erase all messages.

MESSAGES
15
6. LOCKING A MESSAGE
You can protect messages from being erased by ERASE ALL function.
SET MESSAGE LOCK FUNCTION
Press . Backlight comes on.
Press and hold for 2 seconds.
The screen changes to ERASE ALL .
Press to display SET LOCK FNC .Then
press .
Press to turn the message lock ON .
Press to confirm.

MESSAGES
16
LOCK A MESSAGE
Press repeatedly to display the message to be
locked.
Press . Backlight comes on.
Press again. The screen shows ERASE?
Press . The screen displays LOCK?
Press . The message is now locked. When you
read a locked message, you can see icon on top
of the screen.
UNLOCK A MESSAGE
Press repeatedly to select the message to be unlocked.

MESSAGES
17
Press . Backlight comes on.
Press again. Unlock ? is displayed.
Press to confirm.

OPTIONAL FUNCTIONS
18
1. ACTIVATING MENU BOARDS
Titanium has 2 menu boards.
FIRST MENU BOARD
To activate a menu board, press . Backlight comes on.
Press again. Tone off or Tone on is displayed.
As is pressed, the following menu shown on the down is displayed one after
another.
When the desired menu is displayed, press .
1. SET ALERT 2. SET MELODY
4. SET TIME 6. SET AUTO TIMER
3. SET ALARM
5. POWER OFF

OPTIONAL FUNCTIONS
19
SECOND MENU BOARD
To activate the second menu board, press . Backlight comes on.
Press and hold for 2 seconds. At first the screen displays Tone off or Tone on ,
but it changes to ERASE ALL , which is the first option of the second menu board.
As is pressed, the following menu is displayed one after another.
When the desired menu is displayed, press .
1. ERASE ALL 2. SET LOCK
5. READY MESSAGE
4. ENTER GREETING3. SET REMINDER ALERT
7. SET LANGUAGE6. LOW BATTERY ALERT

OPTIONAL FUNCTIONS
20
2. SETTING ALARM
Titanium has 2 types of alarms : daily alarm (everyday : alarm1)
special alarm (one time : alarm 2, 3 )
From standby mode, press two times to activate
menu.
Press and release until SET ALARM displays.
Press to activate alarm menu.
Choose alarm 1 for daily alarm and choose alarm
2or 3for special alarm by pressing .
When the desired alarm displays, press .
Select On by pressing .

OPTIONAL FUNCTIONS
21
Press to confirm.
Press to enter the hour to the desired hour. Then
press to confirm.
Repeat the above procedures to set each field.
The standby screen displays icon .
3. SETTING AUTO TIMER
You can set your pager to power on or off automatically at a selected time of day.
You can save battery power by using this function.
From standby mode, press two times to
access the first menu board. ( Refer to page 18.)
Press and release until SET AUTO is
displayed.

OPTIONAL FUNCTIONS
22
Press .
Press to select On . Then press to confirm.
Follow the same procedures of time setting to set the
on and off times. (Refer to page 9.)
The standby screen displays icon .
4. SETTING REMINDER ALERT
You can set your pager to alert every 5 minutes in case you have unread messages.
Activate the second menu board. ( Refer to page 19.)