no!no! HAIR LITE User manual

User Manual

Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Meet no!no! HAIR LITE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Before you no!no! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Get ready to no!no! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Working with no!no! HAIR LITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Thermicon™ Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4
Safety Instructions
WARNINGS – to reduce the risk of burns or injury
• Do not use this device on the genitals, nipples or face.
• Do not use this device on sunburned skin, open cuts, bruises, blisters, moles or on raised areas
such as scars.
• If you have any skin condition other than those listed above, like cold sores, herpes, severe acne,
please consult your physician before using this device.
• Do not use deodorants, lubricants, liquids, creams, gels, alcohol, water, etc. before use.
• Do not allow the thermodynamic wire to touch your skin.
• Only use this device for its intended purpose as described in this manual.
• Do not leave the device unattended while plugged in.
• Close supervision is necessary for children under 14.
CAUTIONS - to reduce the risk of fire, electric shock, etc.
• Do not reach for a device that has fallen into water while it is plugged in.
• Unplug the power supply from the device before removing it from the water.
• Do not place or store device near a sink or bathtub.
• This device should never be left unattended when plugged in.
• Do not use the Thermicon™ Tip if the wire is bent or damaged in any way.
• Turn off the device while changing the Thermicon™ Tip.
• Do not use the power supply if the cord or plug are damaged in any way.
• Do not use this device near or rest it on flammable objects such as paper or cloth, etc.
• Always unplug the power cord from the electrical outlet after use and before cleaning or maintenance.
• Do not place this device near water or other liquids.
• This device should only be used with the supplied power supply.
• Always turn off this device when you have finished using it.
• Do not open the outer casing of the unit. This might harm the unit and it will void any warranty.

5
Meet no!no! HAIR LITE
Congratulations, you are about to enter the world of virtually painless hair removal that gives you salon-like results.
As you do, it’s important to remember that no!no! HAIR LITE is an ongoing hair removal treatment for professional
salon-like results at home. This is science, not magic. Results take time, patience and a strong commitment to
the treatment’s unique procedures. Since every body is unique, results will vary. The average user should notice
results in 4-6 weeks, for others it might take a bit longer.
Power Connection
On/Off Button /
Signal Light
Front Roller
Thermicon™ Tip
Socket
Thermicon™
Tip Socket
Front
Roller
Posts
Back
Roller
Buffer Thermicon™ Tip Cleaning Brush Power Supply Quick Guide
Figure 1

6
Before You no!no!
Get the best results and performance by learning as much as you can before you no!no! with no!no! HAIR LITE.
Below is a brief description about what to expect and what to look out for and how each of the parts work.
• Test run - Before you use no!no! HAIR LITE the
first time, and before treating new areas, always
test no!no! HAIR LITE on a small section.
• Track your progress! - Before you use no!no!
HAIR LITE the first time, study the area you want
to treat. You might even want to take pictures or
choose a small area and count the hairs. Then,
once every 2 weeks, check your progress. After 4-6
weeks, you should be able to see initial results.
• The smell that tells you it’s working - no!no! HAIR
LITE burns hair and burnt hair smells. But that’s
how you know its working. An after treatment
cream or moisturizer like no!no! Smooth After
Treatment cream will help mask the smell.
• Getting used to the sensation - Some people
experience a mild tingling sensation when they
first use no!no! HAIR LITE, especially around
sensitive areas. This sensation will fade away
completely after a few treatments.
• For the sensitive type - If your skin feels
uncomfortable during treatment, take short
breaks after repeatedly gliding on any one area. If it
continues, stop treatment completely.
• Buff, the finishing touch after you no!no! - It is
essential that you use the Buffer to buff away the
crystallized hair that remains after treatment.
Buffing exfoliates your skin and leaves your skin
feeling silky smooth.
• Keep it smooth - When you finish your treatment,
apply a non-alcoholic lotion or cream like no!no!
Smooth After Treatment cream to keep your skin
moisturized.
• Patience is a virtue - Initial results take an
average of 4-6 weeks to appear.
• The first 4-6 weeks - For best results, use no!no!
HAIR LITE at least 2 -3 times a week for the first
4-6 weeks. You don’t have to wait for a lot of hair to
grow back. Just 1 mm of stubble is enough to get
the smooth results you are looking for.
• After the first 4-6 weeks – You may have noticed
that your hair isn’t growing in as fast or as thick.
You can reduce the treatments to once or twice a
week or use as needed to maintain your results.
• Check the Thermicon™ Tip - Always make sure
the thermodynamic wire is completely intact
before use. If it is bent or torn, replace it before
your next treatment.
• Clean the Thermicon™ Tip - Use the cleaning
brush frequently to remove hair debris, especially
when working on long hair. This will help prolong
the life of your Thermicon™ Tip.
• Stay Smart! - Do not use no!no! HAIR LITE on the
face, genitals or on and around the nipple area.
• Stay protected! Your no!no! HAIR LITE warranty
lasts for one year on parts and service. Keep your
receipt.

7
Get Ready To no!no!
1. Your no!no! HAIR LITE comes to you
preassembled, with the Thermicon™ Tip already
inserted. Simply remove the safety seal from the
Thermicon™ Tip socket.
Figure 2: Remove the Seal
2. Always check the Thermicon™ Tip to make sure
it is intact. Never use a tip if the wire is bent
or torn.
Figure 3:
Bent thermodynamic wire
Figure 4:
Torn thermodynamic wire
* For more information, see the Thermicon™ Tip
section.
3. Connect the power cord to the no!no! HAIR LITE
and then to the wall socket.
Figure 5: Power Supply Connection
4. Turn the unit on by pushing the on/off button
found on the top of the unit, next to the power
cord connection. You will need to press for a few
seconds until the blue signal light turns on.
On/Off Button
& Signal Light
Figure 6: Turn on the button on your no!no! HAIR LITE
*The blue light will flicker until you start gliding.

8
Working With no!no! HAIR LITE
Skin Preparation
Thoroughly clean and dry your skin. Do not use no!no!
HAIR LITE on any area where there might be residual
gels, oils, lotions, deodorant, etc.
Mastering the Slow Glide
• Hold no!no! HAIR LITE at a 90º angle with the
rollers flat against the skin.
Figure 7
• Gently glide no!no! HAIR LITE over each section
and against the grain of hair growth (Figure 8).
• Always glide in a slow, steady, smooth, even
motion in one direction. You may need to go over
each area more than once, but DO NOT stop in
one place.
Figure 8: Glide
• Keep the blue light steady. If it flickers, you may be
going too slow, adjust your speed accordingly.
• Do not press down too hard with the device.
Mastering the Buffer
You’ve tried everything but your skin still doesn’t feel
smooth? Did you remember to buff? Without buffing,
crystallized hair remains in place, giving your skin
a prickly feel. Buffing is the essential final step to a
no!no! HAIR LITE treatment. Buffing exfoliates your
skin, removes crystallized hair and leaves your skin
feeling silky smooth.
To Buff:
1. Hold the Buffer by the flaps.
2. Firmly rub the buffer in either a circular or back
and forth motion over the treated area.
Figure 9: Proper Buffing

9
Sensitive, Curved and Round Areas
Because of curves and angles, rounded areas like
elbows, knees, wrists, underarms and the bikini line
require special care and experience. Once you have
mastered the Slow Glide on your legs or forearms, you
can try no!no! HAIR LITE on more difficult areas.
To work on rounded areas, go slowly and allow no!no!
HAIR LITE to follow the natural curve of the body.
Figure 10: Follow the Natural
Curve of the Body
NOTE: The bikini line is more sensitive than other
areas. If it becomes uncomfortably warm during
treatment, move away from it and work on a different
area for a while. Do not go past the bikini line.
Watch the Light
A blue signal light appears from the on/off button
as soon as you turn on your no!no! HAIR LITE. It will
flicker if you are not gliding at the right speed.
The blue light will turn red when it’s time to replace
the Thermicon™ Tip. Simply remove the Thermicon™
Tip and replace it with a new one. (See the section on
Thermicon™ Tips for more information.)
To Summarize: The 6 Steps of Your no!no! HAIR
LITE Treatment
WARNING! Never use no!no! HAIR LITE on the
genitals, nipples or face.
1. Remove the safety seal
2. Plug it in
3. Turn on the unit by pushing the on/off button on
the top of the unit.
4. Glide in one direction in a slow, steady motion –
always pulling no!no! HAIR LITE upward towards
your body with the signal light facing you.
5. Work on one small section of the treatment area
at a time, completing one before moving on to the
next. Go over each area 3-4 times.
6. Complete the treatment by buffing the
crystallized hair with the no!no! Buffer.

10
Thermicon™ Tips
To remove the Thermicon™ Tip, grasp it by both ends and gently pull it out of the socket. To replace it with a
new tip, grasp it by both ends, line up the two small holes on the Thermicon™ Tip with the posts inside the
Thermicon™ Tip socket and push it gently but firmly into place. Do not use force.
Holes
Posts
no!no! HAIR
LITE device
Figure 11: Installing and removing the Thermicon™ Tip
Check the Thermicon™ Tip to make sure it is inserted correctly.
Make sure the Thermicon™ Tip is pushed all the way into the socket.
Figure 12
Always check the Thermicon™ Tip to make sure it is intact.
Bent thermodynamic wire Torn thermodynamic wire
Figure 13