Upon assembly of all Legs (B), place the Sideboard right side up. Place
the Sideboard on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected. You may be
required to turn the Loveseat, to gain easy access to the secure points.
Turn the Sideboard in a synchronised manner.
CAUTION 1: When tightening these Bolts, tighten sequentially.
DO NOT tighten any bolt fully and then towards the next one.
This would cause the frame to warp.
If there is still wobbling, loosen the bolts and execute this same process.
WARNING!! IF SIDEBOARD IS NOT STABLE , IT COULD LEAD TO
DAMAGING THE PRODUCT.
Ensure all bolts are fully locked into position.
The Sideboard is ready to be used.
CAUTION 2: This Sideboard can only be used on a flat, level surface.